Re: 2.5.70-mm1

[Martin J. Bligh]

> SDET 128  (see disclaimer)
>                            Throughput    Std. Dev
>                2.5.66-mm2       100.0%         0.6%
>           2.5.66-mm2-ext3         3.9%         0.4%
> 
> SDET 128  (see disclaimer)
>                            Throughput    Std. Dev
>           2.5.70-mm1-ext2       100.0%         0.1%
>           2.5.70-mm1-ext3        22.7%         2.0%

Andrew pointed out I should turn off extended attributes, I reran
like this ... not much change (with error margins)

 SDET 32  (see disclaimer)
                           Throughput    Std. Dev
          2.5.70-mm1-ext2       100.0%         0.2%
          2.5.70-mm1-ext3        30.9%         7.8%
          2.5.70-mm1-noxa        34.6%         6.5%

SDET 128  (see disclaimer)
                           Throughput    Std. Dev
          2.5.70-mm1-ext2       100.0%         0.1%
          2.5.70-mm1-ext3        22.7%         2.0%
          2.5.70-mm1-noxa        21.4%         4.6%

.text.lock.attr is still in there, so either I balls'ed it up somehow, or
it wasn't the extd attr stuff in the first place. 

CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set

   2024927   267.3% total
   1677960   472.8% default_idle
    116350     0.0% .text.lock.transaction
     42783     0.0% do_get_write_access
     40293     0.0% journal_dirty_metadata
     34251  6414.0% __down
     27867  9166.8% .text.lock.attr
     20016  2619.9% __wake_up
     19632   927.4% schedule
     12204     0.0% .text.lock.sched
     12128     0.0% start_this_handle
     10011     0.0% journal_add_journal_head