Good kernels (doesn't give EIO) : 2.4.18-5asp, 2.4.19, 2.4.20-pre2
Bad kernel (gives EIO): 2.4.20-pre4, 2.4.20-pre6, 2.4.20,
2.4.21-pre5-ac3, 2.4.21-pre6
2.4.20-pre3 unfortunatly hangs on boot on my hardware.
I'm able to trigger problem by 'dd if=/dev/zero of=test bs=32k count=1024'
I'm using NFS over UDP, and this problem ccured regardless of soft or
hard mounted fs.
There was no changes in eepro100 driver i'm using for NIC between
2.4.20-pre2 and 2.4.20-pre4
client hardware : Intel mobo with built-in NIC , P4 2.2Ghz, 512 Mb DDR
memory
server hardware: MSI i815ept mobo with 3Com 3c905C-TX/TX-M [Tornado]
PIII 733Mhz , 512Mb SDRAM
client and server are on the same 100Mb hub , client is under ASP Linux
7.3, server is under RH8.0
Unfortunatly, dd or cp problem is transient , while make (actually ar)
gets EIO when building openh323 just every time.
I have to stick to the more recent then 2.4.20-pre2 kernel to make
CD/DVD writer working on the other hand.
Can You investigate this problem or give me an advise what to do myself ?
By the way , do You have any progress with nfsclient hanging in the D
state, i've told You previously ?
Cheers, Vladimir.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/