Re: [BUG] cardbus/hotplugging still broken in 2.5.56

[Jens Taprogge]

This is a MIME-formatted message.  If you see this text it means that your
E-mail software does not support MIME-formatted messages.

--=_courier-13755-1042618524-0001-2
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

The cardbus problems are caused by 

ChangeSet@1.797.145.6  2002-11-25 18:31:10-08:00 [e-mail]

as far as I can tell. 

pci_enable_device() will fail at least on i386 (see
arch/i386/pci/i386.c: pcibios_enable_resource (line 260)) if the
resources have not been assigned previously. Hence the ostensible
resource collisions.

The attached patch should fix the problem.

I have send the patch to Dave Jones some time ago but did not hear from
him yet.

I am not subscribed to the list so please cc me on replys. 

Jens

-- 
Jens Taprogge

--=_courier-13755-1042618524-0001-2
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="cardbus_fix_2.5.52.patch"

diff -ur linux-2.5.51/drivers/pcmcia/cardbus.c linux-2.5.51_jlt/drivers/pcmcia/cardbus.c
--- linux-2.5.51/drivers/pcmcia/cardbus.c	2002-12-10 03:45:52.000000000 +0100
+++ linux-2.5.51_jlt/drivers/pcmcia/cardbus.c	2002-12-10 22:19:46.000000000 +0100
@@ -229,6 +229,17 @@
     
 =====================================================================*/
 
+static void cb_free_resources(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < 7; i++) {
+		struct resource *res = dev->resource + i;
+		if (res->parent)
+			release_resource(res);
+	}
+}
+
 int cb_alloc(socket_info_t * s)
 {
 	struct pci_bus *bus;
@@ -283,25 +294,31 @@
 		dev->hdr_type = hdr & 0x7f;
 
 		pci_setup_device(dev);
-		if (pci_enable_device(dev))
-			continue;
 
 		strcpy(dev->dev.bus_id, dev->slot_name);
 
 		/* FIXME: Do we need to enable the expansion ROM? */
 		for (r = 0; r < 7; r++) {
 			struct resource *res = dev->resource + r;
-			if (res->flags)
-				pci_assign_resource(dev, r);
+			if (res->flags && pci_assign_resource(dev, r) < 0) {
+				cb_free_resources(dev);
+				continue;
+			}
 		}
 
 		/* Does this function have an interrupt at all? */
 		pci_readb(dev, PCI_INTERRUPT_PIN, &irq_pin);
-		if (irq_pin) {
+		if (irq_pin)
 			dev->irq = irq;
-			pci_writeb(dev, PCI_INTERRUPT_LINE, irq);
+
+		if (pci_enable_device(dev)) {
+			cb_free_resources(dev);
+			continue;
 		}
 
+		if (irq_pin)
+			pci_writeb(dev, PCI_INTERRUPT_LINE, irq);
+		
 		device_register(&dev->dev);
 		pci_insert_device(dev, bus);
 	}

--=_courier-13755-1042618524-0001-2--