Re: Alot of DMA errors in 2.4.18, 2.4.20 and 2.5.52
Frank van Maarseveen (F.vanMaarseveen@inter.NL.net)
Thu, 26 Dec 2002 13:37:10 +0100
On Wed, Dec 25, 2002 at 12:58:20PM +0100, Tomas Szepe wrote:
> > For some funny reason, a 2.4.20 kernel refuses to set the DMA-level on
> > the new disks (all connected to a UDMA5-capable Ultra100 TX2 controller)
> > to UDMA5,4,3 and settles it for UDMA2, which is the highest possibility
> > for the OLD onboard-controller (but NOT for the promise card).
>
> You need to boot 2.4.19 and 2.4.20 with 'ideX=ata66' where X is the
> number of the channel where you wish to use transfer modes above UDMA2.
> For instance, "ide0=ata66 ide1=ata66" will do the trick for the first two
hdparm -X69 /dev/hda will put it into UDMA5/ata100 mode as well
(69 == 64 + UDMA mode). No need to specify it at boot time.
(this discussion reminded me of my own TX2 adapter and 100GB disk:
adjusting its setting improved sequential disk reads: now 36MB/sec
instead of 24MB/sec)
--
Frank
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/