Hi,
this patch solves the problem reported by Eyal Lebedinsky.
It moves scx200.c from arch/i386/kernel to drivers/char directory and adj=
usts=20
the Makefile accordingly. Marcelo, can you please apply?
Best regards,=20
J=F6rg
--------------Boundary-00=_C18EDJ7KMF7TVYWEJEIS
Content-Type: text/x-diff;
charset="us-ascii";
name="001_scx200-fix"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="001_scx200-fix"
--- linux/drivers/char/Makefile 2002-12-10 20:22:56.000000000 +0000
+++ linux/drivers/char/Makefile 2002-12-10 20:22:01.000000000 +0000
@@ -254,7 +254,7 @@
obj-$(CONFIG_DZ) += dz.o
obj-$(CONFIG_NWBUTTON) += nwbutton.o
obj-$(CONFIG_NWFLASH) += nwflash.o
-obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
+obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o scx200.o
# Only one watchdog can succeed. We probe the hardware watchdog
# drivers first, then the softdog driver. This means if your hardware
--- linux/drivers/char/scx200.c 1970-01-01 00:00:00.000000000 +0000
+++ linux/drivers/char/scx200.c 2002-12-10 20:22:10.000000000 +0000
@@ -0,0 +1,128 @@
+/* linux/drivers/char/scx200.c
+
+ Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+ National Semiconductor SCx200 support. */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <linux/scx200.h>
+#include <linux/scx200.h>
+
+#define NAME "scx200"
+
+MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
+MODULE_DESCRIPTION("NatSemi SCx200 Driver");
+MODULE_LICENSE("GPL");
+
+unsigned scx200_gpio_base = 0;
+long scx200_gpio_shadow[2];
+
+spinlock_t scx200_gpio_lock = SPIN_LOCK_UNLOCKED;
+static spinlock_t scx200_gpio_config_lock = SPIN_LOCK_UNLOCKED;
+
+u32 scx200_gpio_configure(int index, u32 mask, u32 bits)
+{
+ u32 config, new_config;
+ unsigned long flags;
+
+ spin_lock_irqsave(&scx200_gpio_config_lock, flags);
+
+ outl(index, scx200_gpio_base + 0x20);
+ config = inl(scx200_gpio_base + 0x24);
+
+ new_config = (config & mask) | bits;
+ outl(new_config, scx200_gpio_base + 0x24);
+
+ spin_unlock_irqrestore(&scx200_gpio_config_lock, flags);
+
+ return config;
+}
+
+void scx200_gpio_dump(unsigned index)
+{
+ u32 config = scx200_gpio_configure(index, ~0, 0);
+ printk(KERN_DEBUG "GPIO%02u: 0x%08lx", index, (unsigned long)config);
+
+ if (config & 1)
+ printk(" OE"); /* output enabled */
+ else
+ printk(" TS"); /* tristate */
+ if (config & 2)
+ printk(" PP"); /* push pull */
+ else
+ printk(" OD"); /* open drain */
+ if (config & 4)
+ printk(" PUE"); /* pull up enabled */
+ else
+ printk(" PUD"); /* pull up disabled */
+ if (config & 8)
+ printk(" LOCKED"); /* locked */
+ if (config & 16)
+ printk(" LEVEL"); /* level input */
+ else
+ printk(" EDGE"); /* edge input */
+ if (config & 32)
+ printk(" HI"); /* trigger on rising edge */
+ else
+ printk(" LO"); /* trigger on falling edge */
+ if (config & 64)
+ printk(" DEBOUNCE"); /* debounce */
+ printk("\n");
+}
+
+int __init scx200_init(void)
+{
+ struct pci_dev *bridge;
+ int bank;
+ unsigned base;
+
+ printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n");
+
+ if ((bridge = pci_find_device(PCI_VENDOR_ID_NS,
+ PCI_DEVICE_ID_NS_SCx200_BRIDGE,
+ NULL)) == NULL)
+ return -ENODEV;
+
+ base = pci_resource_start(bridge, 0);
+ printk(KERN_INFO NAME ": GPIO base 0x%x\n", base);
+
+ if (request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO") == 0) {
+ printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n");
+ return -EBUSY;
+ }
+
+ scx200_gpio_base = base;
+
+ /* read the current values driven on the GPIO signals */
+ for (bank = 0; bank < 2; ++bank)
+ scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank);
+
+ return 0;
+}
+
+void __exit scx200_cleanup(void)
+{
+ release_region(scx200_gpio_base, SCx200_GPIO_SIZE);
+}
+
+module_init(scx200_init);
+module_exit(scx200_cleanup);
+
+EXPORT_SYMBOL(scx200_gpio_base);
+EXPORT_SYMBOL(scx200_gpio_shadow);
+EXPORT_SYMBOL(scx200_gpio_lock);
+EXPORT_SYMBOL(scx200_gpio_configure);
+EXPORT_SYMBOL(scx200_gpio_dump);
+
+/*
+ Local variables:
+ compile-command: "make -k -C ../../.. SUBDIRS=arch/i386/kernel modules"
+ c-basic-offset: 8
+ End:
+*/
--- linux/arch/i386/kernel/scx200.c 1970-01-01 00:00:00.000000000 +0000
+++ linux/arch/i386/kernel/scx200.c 2002-12-10 20:22:10.000000000 +0000
@@ -1,128 +0,0 @@
-/* linux/arch/i386/kernel/scx200.c
-
- Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
-
- National Semiconductor SCx200 support. */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <linux/scx200.h>
-#include <linux/scx200.h>
-
-#define NAME "scx200"
-
-MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
-MODULE_DESCRIPTION("NatSemi SCx200 Driver");
-MODULE_LICENSE("GPL");
-
-unsigned scx200_gpio_base = 0;
-long scx200_gpio_shadow[2];
-
-spinlock_t scx200_gpio_lock = SPIN_LOCK_UNLOCKED;
-static spinlock_t scx200_gpio_config_lock = SPIN_LOCK_UNLOCKED;
-
-u32 scx200_gpio_configure(int index, u32 mask, u32 bits)
-{
- u32 config, new_config;
- unsigned long flags;
-
- spin_lock_irqsave(&scx200_gpio_config_lock, flags);
-
- outl(index, scx200_gpio_base + 0x20);
- config = inl(scx200_gpio_base + 0x24);
-
- new_config = (config & mask) | bits;
- outl(new_config, scx200_gpio_base + 0x24);
-
- spin_unlock_irqrestore(&scx200_gpio_config_lock, flags);
-
- return config;
-}
-
-void scx200_gpio_dump(unsigned index)
-{
- u32 config = scx200_gpio_configure(index, ~0, 0);
- printk(KERN_DEBUG "GPIO%02u: 0x%08lx", index, (unsigned long)config);
-
- if (config & 1)
- printk(" OE"); /* output enabled */
- else
- printk(" TS"); /* tristate */
- if (config & 2)
- printk(" PP"); /* push pull */
- else
- printk(" OD"); /* open drain */
- if (config & 4)
- printk(" PUE"); /* pull up enabled */
- else
- printk(" PUD"); /* pull up disabled */
- if (config & 8)
- printk(" LOCKED"); /* locked */
- if (config & 16)
- printk(" LEVEL"); /* level input */
- else
- printk(" EDGE"); /* edge input */
- if (config & 32)
- printk(" HI"); /* trigger on rising edge */
- else
- printk(" LO"); /* trigger on falling edge */
- if (config & 64)
- printk(" DEBOUNCE"); /* debounce */
- printk("\n");
-}
-
-int __init scx200_init(void)
-{
- struct pci_dev *bridge;
- int bank;
- unsigned base;
-
- printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n");
-
- if ((bridge = pci_find_device(PCI_VENDOR_ID_NS,
- PCI_DEVICE_ID_NS_SCx200_BRIDGE,
- NULL)) == NULL)
- return -ENODEV;
-
- base = pci_resource_start(bridge, 0);
- printk(KERN_INFO NAME ": GPIO base 0x%x\n", base);
-
- if (request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO") == 0) {
- printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n");
- return -EBUSY;
- }
-
- scx200_gpio_base = base;
-
- /* read the current values driven on the GPIO signals */
- for (bank = 0; bank < 2; ++bank)
- scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank);
-
- return 0;
-}
-
-void __exit scx200_cleanup(void)
-{
- release_region(scx200_gpio_base, SCx200_GPIO_SIZE);
-}
-
-module_init(scx200_init);
-module_exit(scx200_cleanup);
-
-EXPORT_SYMBOL(scx200_gpio_base);
-EXPORT_SYMBOL(scx200_gpio_shadow);
-EXPORT_SYMBOL(scx200_gpio_lock);
-EXPORT_SYMBOL(scx200_gpio_configure);
-EXPORT_SYMBOL(scx200_gpio_dump);
-
-/*
- Local variables:
- compile-command: "make -k -C ../../.. SUBDIRS=arch/i386/kernel modules"
- c-basic-offset: 8
- End:
-*/
--------------Boundary-00=_C18EDJ7KMF7TVYWEJEIS--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/