--Boundary_(ID_Kc8aan8Ni6uFhQRvkb3p5A)
Content-type: TEXT/PLAIN; charset=US-ASCII
Content-transfer-encoding: 7BIT
Hi All,
Ok, we have a Dell PE4600 with dual P4X processors. It will not balance
interrupts between the two cpus, CPU0 always receives the bulk
of the interrupts, although both processors are being utilized
by processes on the system. This system is not yet in production, so I
have some time to try things on it.
Current kernel is 2.4.18 with the LSE APIC Routing patch
(http://sourceforge.net/projects/lse). 2.4.18 stock (well ok, -rc4) has
much the same results.
I have tried Ingos' patch from early Feb and it managed to hang the system
on CPU0 initialization...
This is a newer system and uses the ServerWorks GCHE South Bridge I
believe, dmesg actually comes up with a few unknown devices.
I'm attaching dmesg output, .config, lspci -v output, and output
from /proc/cpuinfo and /proc/interrupts.
If anything else is needed, just let me know.
Thanks and Regards,
James Bourne
-- James Bourne, Supervisor Data Centre Operations Mount Royal College, Calgary, AB, CA www.mtroyal.ab.ca****************************************************************************** This communication is intended for the use of the recipient to which it is addressed, and may contain confidential, personal, and or privileged information. Please contact the sender immediately if you are not the intended recipient of this communication, and do not copy, distribute, or take action relying on it. Any communication received in error, or subsequent reply, should be deleted or destroyed. ******************************************************************************
--Boundary_(ID_Kc8aan8Ni6uFhQRvkb3p5A) Content-id: <Pine.LNX.4.44.0204161629320.735@skuld.mtroyal.ab.ca> Content-type: TEXT/PLAIN; name=lspci.out; charset=US-ASCII Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=lspci.out Content-description: lspci output
00:00.0 Host bridge: ServerWorks CMIC-HE (rev 22) Flags: fast devsel
00:00.1 Host bridge: ServerWorks CMIC-HE Flags: fast devsel
00:00.2 Host bridge: ServerWorks CMIC-HE Flags: fast devsel
00:00.3 Host bridge: ServerWorks CMIC-HE Flags: fast devsel
00:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Subsystem: Dell Computer Corporation: Unknown device 0106 Flags: bus master, medium devsel, latency 32, IRQ 19 Memory at fe203000 (32-bit, non-prefetchable) [size=4K] I/O ports at ecc0 [size=64] Memory at fe000000 (32-bit, non-prefetchable) [size=1M] Capabilities: [dc] Power Management version 2
00:06.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 0106 Flags: bus master, medium devsel, latency 32, IRQ 18 BIST result: 00 I/O ports at e800 [disabled] [size=256] Memory at fe202000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fe100000 [disabled] [size=128K] Capabilities: [dc] Power Management version 1
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 0106 Flags: bus master, VGA palette snoop, stepping, medium devsel, latency 32 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] I/O ports at e400 [size=256] Memory at fe201000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [5c] Power Management version 2
00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93) Subsystem: ServerWorks CSB5 South Bridge Flags: bus master, medium devsel, latency 32
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-if 82 [Master PriP]) Subsystem: ServerWorks CSB5 IDE Controller Flags: bus master, medium devsel, latency 0 I/O ports at 08c0 [size=8] I/O ports at 08c8 [size=4] I/O ports at 08d0 [size=8] I/O ports at 08d8 [size=4] I/O ports at 08b0 [size=16]
00:0f.3 ISA bridge: ServerWorks: Unknown device 0225 Subsystem: ServerWorks: Unknown device 0230 Flags: bus master, medium devsel, latency 0
00:10.0 Host bridge: ServerWorks CIOB30 (rev 03) Flags: 66Mhz, medium devsel Capabilities: [60] PCI-X non-bridge device.
00:10.2 Host bridge: ServerWorks CIOB30 (rev 03) Flags: 66Mhz, medium devsel Capabilities: [60] PCI-X non-bridge device.
00:11.0 Host bridge: ServerWorks CIOB30 (rev 03) Flags: 66Mhz, medium devsel Capabilities: [60] PCI-X non-bridge device.
00:11.2 Host bridge: ServerWorks CIOB30 (rev 03) Flags: 66Mhz, medium devsel Capabilities: [60] PCI-X non-bridge device.
01:06.0 Ethernet controller: BROADCOM Corporation NetXtreme BCM5700 Gigabit Ethernet (rev 14) Subsystem: Dell Computer Corporation NetXtreme 1000BaseTX Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 22 Memory at fcf00000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device. Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
01:08.0 PCI bridge: Intel Corp.: Unknown device 0309 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, slow devsel, latency 32 Bus: primary=01, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fcd00000-fcefffff Capabilities: [68] Power Management version 2
02:06.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) Subsystem: Dell Computer Corporation: Unknown device 0106 Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 20 BIST result: 00 I/O ports at dc00 [disabled] [size=256] Memory at fcdff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fce00000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2
02:06.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) Subsystem: Dell Computer Corporation: Unknown device 0106 Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 21 BIST result: 00 I/O ports at d800 [disabled] [size=256] Memory at fcdfe000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fce00000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2
03:06.0 PCI bridge: Intel Corp.: Unknown device b154 (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 32 Bus: primary=03, secondary=04, subordinate=05, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fad00000-faffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7f00000 Capabilities: [dc] Power Management version 1
04:00.0 PCI bridge: Intel Corp.: Unknown device b154 (prog-if 00 [Normal decode]) Flags: bus master, medium devsel, latency 32 Bus: primary=04, secondary=05, subordinate=05, sec-latency=32 Memory behind bridge: faf00000-faffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7f00000 Capabilities: [dc] Power Management version 1
04:01.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor (rev 06) Subsystem: American Megatrends Inc. QLA12160 on AMI MegaRAID Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 28 I/O ports at bc00 [size=256] Memory at fadff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fae00000 [disabled] [size=128K] Capabilities: [44] Power Management version 1
05:00.0 RAID bus controller: American Megatrends Inc. MegaRAID (rev 20) Subsystem: Dell Computer Corporation PowerEdge RAID Controller 3/DC Flags: bus master, medium devsel, latency 32, IRQ 27 Memory at f0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at faf00000 [disabled] [size=32K] Capabilities: [80] Power Management version 2
0a:06.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d) Subsystem: Intel Corp. EtherExpress PRO/100 S Server Adapter Flags: bus master, medium devsel, latency 32, IRQ 35 Memory at eff41000 (32-bit, non-prefetchable) [size=4K] I/O ports at 8cc0 [size=64] Memory at eff20000 (32-bit, non-prefetchable) [size=128K] Capabilities: [dc] Power Management version 2
0a:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d) Subsystem: Intel Corp. EtherExpress PRO/100 S Server Adapter Flags: bus master, medium devsel, latency 32, IRQ 31 Memory at eff40000 (32-bit, non-prefetchable) [size=4K] I/O ports at 8c80 [size=64] Memory at eff00000 (32-bit, non-prefetchable) [size=128K] Capabilities: [dc] Power Management version 2
--Boundary_(ID_Kc8aan8Ni6uFhQRvkb3p5A) Content-id: <Pine.LNX.4.44.0204161629321.735@skuld.mtroyal.ab.ca> Content-type: TEXT/PLAIN; name=dmesg.out; charset=US-ASCII Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=dmesg.out Content-description: dmesg output
BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fffec00 (ACPI data) BIOS-e820: 000000007fffec00 - 000000007ffff000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. found SMP MP-table at 000fe710 hm, page 000fe000 reserved twice. hm, page 000ff000 reserved twice. hm, page 000f0000 reserved twice. On node 0 totalpages: 524272 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 294896 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: DELL Product ID: PE 0106 APIC at: 0xFEE00000 Processor #0 Unknown CPU [15:2] APIC version 20 Processor #2 Unknown CPU [15:2] APIC version 20 I/O APIC #4 Version 17 at 0xFEC00000. I/O APIC #5 Version 17 at 0xFEC01000. I/O APIC #6 Version 17 at 0xFEC02000. Processors: 2 Kernel command line: BOOT_IMAGE=linuxp4 ro root=808 BOOT_FILE=/boot/vmlinuz-2.4.18-PE4600-P4 idle=poll using polling idle threads. Initializing CPU#0 Detected 1791.317 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3565.15 BogoMIPS Memory: 2061820k/2097088k available (1085k kernel code, 34884k reserved, 296k data, 208k init, 1179584k highmem) Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU0: Intel(R) XEON(TM) CPU 1.80GHz stepping 04 per-CPU timeslice cutoff: 1462.83 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000040 ESR value after enabling vector: 00000000 Booting processor 1/2 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3578.26 BogoMIPS CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU1: Intel(R) XEON(TM) CPU 1.80GHz stepping 04 Total of 2 processors activated (7143.42 BogoMIPS). WARNING: No sibling found for CPU 0. WARNING: No sibling found for CPU 1. ENABLING IO-APIC IRQs Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. Setting 5 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 5 ... ok. Setting 6 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 6 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 4-0, 4-10, 4-11, 4-13, 6-15 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 50. number of IO-APIC #4 registers: 16. number of IO-APIC #5 registers: 16. number of IO-APIC #6 registers: 16. testing the IO APIC.......................
IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 0 0 0 0 0 1 1 31 01 003 03 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 79 0d 000 00 1 0 0 0 0 0 0 00 0e 003 03 0 0 0 0 0 1 1 81 0f 003 03 0 0 0 0 0 1 1 89
IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 05000000 ....... : arbitration: 05 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 91 01 003 03 1 1 0 1 0 1 1 99 02 003 03 1 1 0 1 0 1 1 A1 03 003 03 1 1 0 1 0 1 1 A9 04 003 03 1 1 0 1 0 1 1 B1 05 003 03 1 1 0 1 0 1 1 B9 06 003 03 1 1 0 1 0 1 1 C1 07 003 03 1 1 0 1 0 1 1 C9 08 003 03 1 1 0 1 0 1 1 D1 09 003 03 1 1 0 1 0 1 1 D9 0a 003 03 1 1 0 1 0 1 1 E1 0b 003 03 1 1 0 1 0 1 1 E9 0c 003 03 1 1 0 1 0 1 1 32 0d 003 03 1 1 0 1 0 1 1 3A 0e 003 03 1 1 0 1 0 1 1 42 0f 003 03 1 1 0 1 0 1 1 4A
IO APIC #6...... .... register #00: 06000000 ....... : physical APIC id: 06 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 06000000 ....... : arbitration: 06 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 52 01 003 03 1 1 0 1 0 1 1 5A 02 003 03 1 1 0 1 0 1 1 62 03 003 03 1 1 0 1 0 1 1 6A 04 003 03 1 1 0 1 0 1 1 72 05 003 03 1 1 0 1 0 1 1 7A 06 003 03 1 1 0 1 0 1 1 82 07 003 03 1 1 0 1 0 1 1 8A 08 003 03 1 1 0 1 0 1 1 92 09 003 03 1 1 0 1 0 1 1 9A 0a 003 03 1 1 0 1 0 1 1 A2 0b 003 03 1 1 0 1 0 1 1 AA 0c 003 03 1 1 0 1 0 1 1 B2 0d 003 03 1 1 0 1 0 1 1 BA 0e 003 03 1 1 0 1 0 1 1 C2 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 1:0 IRQ17 -> 1:1 IRQ18 -> 1:2 IRQ19 -> 1:3 IRQ20 -> 1:4 IRQ21 -> 1:5 IRQ22 -> 1:6 IRQ23 -> 1:7 IRQ24 -> 1:8 IRQ25 -> 1:9 IRQ26 -> 1:10 IRQ27 -> 1:11 IRQ28 -> 1:12 IRQ29 -> 1:13 IRQ30 -> 1:14 IRQ31 -> 1:15 IRQ32 -> 2:0 IRQ33 -> 2:1 IRQ34 -> 2:2 IRQ35 -> 2:3 IRQ36 -> 2:4 IRQ37 -> 2:5 IRQ38 -> 2:6 IRQ39 -> 2:7 IRQ40 -> 2:8 IRQ41 -> 2:9 IRQ42 -> 2:10 IRQ43 -> 2:11 IRQ44 -> 2:12 IRQ45 -> 2:13 IRQ46 -> 2:14 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1791.5168 MHz. ..... host bus clock speed is 99.5284 MHz. cpu: 0, clocks: 995284, slice: 331761 CPU0<T0:995280,T1:663504,D:15,S:331761,C:995284> cpu: 1, clocks: 995284, slice: 331761 CPU1<T0:995280,T1:331744,D:14,S:331761,C:995284> checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfc67e, last bus=15 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Discovered primary peer bus 01 [IRQ] Unknown bridge resource 0: assuming transparent PCI: Discovered primary peer bus 03 [IRQ] PCI: Discovered primary peer bus 0a [IRQ] PCI: Discovered primary peer bus 0f [IRQ] PCI: Using IRQ router ServerWorks [1166/0201] at 00:0f.0 PCI->APIC IRQ transform: (B0,I4,P0) -> 19 PCI->APIC IRQ transform: (B0,I6,P0) -> 18 PCI->APIC IRQ transform: (B1,I6,P0) -> 22 PCI->APIC IRQ transform: (B2,I6,P0) -> 20 PCI->APIC IRQ transform: (B2,I6,P1) -> 21 PCI->APIC IRQ transform: (B4,I1,P0) -> 28 PCI->APIC IRQ transform: (B5,I0,P0) -> 27 PCI->APIC IRQ transform: (B10,I6,P0) -> 35 PCI->APIC IRQ transform: (B10,I8,P0) -> 31 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded pty: 256 Unix98 ptys configured Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others eth0: Intel Corp. 82557 [Ethernet Pro 100], 00:B0:D0:FC:71:67, IRQ 19. Receiver lock-up bug exists -- enabling work-around. Board assembly 07195d-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Receiver lock-up workaround activated. eth1: OEM i82557/i82558 10/100 Ethernet, 00:02:B3:9E:60:8D, IRQ 35. Board assembly a64083-001, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. Secondary interface chip i82555. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). eth2: OEM i82557/i82558 10/100 Ethernet, 00:02:B3:9E:60:88, IRQ 31. Board assembly a64083-001, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. Secondary interface chip i82555. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 <Adaptec aic7890/91 Ultra2 SCSI adapter> aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001) megaraid: found 0x101e:0x1960:idx 0:bus 5:slot 0:func 0 scsi3 : Found a MegaRAID controller at 0xf880c000, IRQ: 27 scsi3 : Enabling 64 bit support megaraid: [161J:3.17] detected 2 logical drives megaraid: channel[1] is raid. megaraid: channel[2] is raid. scsi3 : LSI Logic MegaRAID 161J 254 commands 16 targs 5 chans 7 luns scsi3: scanning channel 0 for devices. Vendor: PE/PV Model: 1x2 SCSI BP Rev: 0.25 Type: Processor ANSI SCSI revision: 02 scsi3: scanning channel 1 for devices. Vendor: PE/PV Model: 1x8 SCSI BP Rev: 0.25 Type: Processor ANSI SCSI revision: 02 scsi3: scanning virtual channel 1 for logical drives. Vendor: MegaRAID Model: LD0 RAID1 17278R Rev: 161J Type: Direct-Access ANSI SCSI revision: 02 Vendor: MegaRAID Model: LD1 RAID5 34556R Rev: 161J Type: Direct-Access ANSI SCSI revision: 02 scsi3: scanning virtual channel 2 for logical drives. scsi3: scanning virtual channel 3 for logical drives. scsi3: scanning virtual channel 4 for logical drives. Attached scsi disk sda at scsi3, channel 2, id 0, lun 0 Attached scsi disk sdb at scsi3, channel 2, id 1, lun 0 SCSI device sda: 35385344 512-byte hdwr sectors (18117 MB) Partition check: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > SCSI device sdb: 70770688 512-byte hdwr sectors (36235 MB) sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > Attached scsi generic sg0 at scsi3, channel 0, id 6, lun 0, type 3 Attached scsi generic sg1 at scsi3, channel 1, id 6, lun 0, type 3 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 208k freed Adding Swap: 2096440k swap-space (priority -1) Adding Swap: 2096472k swap-space (priority -2) Adding Swap: 2096472k swap-space (priority -3) Adding Swap: 2096440k swap-space (priority -4) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,8), internal journal md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,17), internal journal EXT3-fs: mounted filesystem with ordered data mode.
--Boundary_(ID_Kc8aan8Ni6uFhQRvkb3p5A) Content-id: <Pine.LNX.4.44.0204161629322.735@skuld.mtroyal.ab.ca> Content-type: TEXT/PLAIN; name=dell-PE4600-config; charset=US-ASCII Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=dell-PE4600-config Content-description: kernel config
# # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y
# # Code maturity level options # CONFIG_EXPERIMENTAL=y
# # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y
# # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=m # CONFIG_X86_CPUID is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_SMP=y # CONFIG_MULTIQUAD is not set CONFIG_HAVE_DEC_LOCK=y
# # General setup # CONFIG_NET=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PM is not set # CONFIG_ACPI is not set # CONFIG_APM is not set
# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set
# # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_SUNBPP is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set
# # Plug and Play configuration # CONFIG_PNP=y # CONFIG_ISAPNP is not set
# # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set
# # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID5=m CONFIG_MD_MULTIPATH=m CONFIG_BLK_DEV_LVM=m
# # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y # CONFIG_NETLINK_DEV is not set # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set CONFIG_INET_ECN=y CONFIG_SYN_COOKIES=y # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set
# # # CONFIG_IPX=m CONFIG_IPX_INTERN=y # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set
# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set
# # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set
# # ATA/IDE/MFM/RLL support # CONFIG_IDE=m
# # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=m
# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=m # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_COMMERIAL is not set # CONFIG_BLK_DEV_TIVO is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set
# # IDE chipset support/bugfixes # CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_IDEDMA_PCI_AUTO is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_AEC62XX_TUNING is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_PIIX_TUNING is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # CONFIG_BLK_DEV_ATARAID is not set # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set
# # SCSI support # CONFIG_SCSI=y
# # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=y
# # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_DEBUG_QUEUES is not set CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set
# # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set CONFIG_SCSI_MEGARAID=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_DEBUG is not set
# # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set
# # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set
# # I2O device support # CONFIG_I2O=m CONFIG_I2O_PCI=m CONFIG_I2O_BLOCK=m # CONFIG_I2O_LAN is not set CONFIG_I2O_SCSI=m # CONFIG_I2O_PROC is not set
# # Network device support # CONFIG_NETDEVICES=y
# # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set
# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set # CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_DGRS is not set # CONFIG_DM9102 is not set CONFIG_EEPRO100=y # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_NEW_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_WINBOND_840 is not set # CONFIG_NET_POCKET is not set
# # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set
# # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set
# # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set
# # Wan interfaces # # CONFIG_WAN is not set
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # IrDA (infrared) support # # CONFIG_IRDA is not set
# # ISDN subsystem # # CONFIG_ISDN is not set
# # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set
# # Input core support # # CONFIG_INPUT is not set # CONFIG_INPUT_KEYBDEV is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=m # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set
# # I2C support # # CONFIG_I2C is not set
# # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set
# # Joysticks # # CONFIG_INPUT_GAMEPORT is not set
# # Input core support is needed for gameports #
# # Input core support is needed for joysticks # # CONFIG_QIC02_TAPE is not set
# # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_INTEL_RNG=y CONFIG_NVRAM=m CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set
# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set
# # Multimedia devices # # CONFIG_VIDEO_DEV is not set
# # File systems # CONFIG_QUOTA=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_JBD=y CONFIG_JBD_DEBUG=y CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=m # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=m CONFIG_TMPFS=y CONFIG_RAMFS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_MINIX_FS=m # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set CONFIG_ROMFS_FS=m CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set
# # Network File Systems # CONFIG_CODA_FS=m CONFIG_INTERMEZZO_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y CONFIG_SUNRPC=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y CONFIG_NCPFS_STRONG=y CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y # CONFIG_NCPFS_SMALLDOS is not set CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y # CONFIG_ZISOFS_FS is not set CONFIG_ZLIB_FS_INFLATE=m
# # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set CONFIG_OSF_PARTITION=y # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y
# # Native Language Support # CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set
# # Console drivers # CONFIG_VGA_CONSOLE=y # CONFIG_VIDEO_SELECT is not set # CONFIG_MDA_CONSOLE is not set
# # Frame-buffer support # # CONFIG_FB is not set
# # Sound # # CONFIG_SOUND is not set
# # USB support # # CONFIG_USB is not set
# # USB Controllers # # CONFIG_USB_UHCI is not set # CONFIG_USB_UHCI_ALT is not set # CONFIG_USB_OHCI is not set
# # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH is not set # CONFIG_USB_STORAGE is not set # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set
# # USB Human Interface Devices (HID) #
# # Input core support is needed for USB HID #
# # USB Imaging devices # # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set
# # USB Multimedia devices #
# # Video4Linux support is needed for USB Multimedia device support #
# # USB Network adaptors # # CONFIG_USB_PEGASUS is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set
# # USB port drivers # # CONFIG_USB_USS720 is not set
# # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set
# # USB Miscellaneous drivers # # CONFIG_USB_RIO500 is not set
# # Bluetooth support # # CONFIG_BLUEZ is not set
# # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_BUGVERBOSE is not set
--Boundary_(ID_Kc8aan8Ni6uFhQRvkb3p5A) Content-id: <Pine.LNX.4.44.0204161629323.735@skuld.mtroyal.ab.ca> Content-type: TEXT/PLAIN; name=proc.out; charset=US-ASCII Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=proc.out Content-description: /proc info
output from /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) XEON(TM) CPU 1.80GHz stepping : 4 cpu MHz : 1791.317 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3565.15
processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) XEON(TM) CPU 1.80GHz stepping : 4 cpu MHz : 1791.317 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3578.26
output from /proc/interrupts CPU0 CPU1 0: 469709 221 IO-APIC-edge timer 1: 3 0 IO-APIC-edge keyboard 2: 0 0 XT-PIC cascade 8: 2 0 IO-APIC-edge rtc 18: 15 0 IO-APIC-level aic7xxx 19: 42366 148 IO-APIC-level eth0 20: 16 0 IO-APIC-level aic7xxx 21: 16 0 IO-APIC-level aic7xxx 27: 6508 46 IO-APIC-level megaraid NMI: 0 0 LOC: 469721 469658 ERR: 0 MIS: 0
--Boundary_(ID_Kc8aan8Ni6uFhQRvkb3p5A)-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/