Re: email address (was SMP lockup with 2.4.12 on VIA chipset (still

PinkFreud (pf-kernel@mirkwood.net)
Mon, 22 Oct 2001 14:06:11 -0400 (EDT)


Tried 1.4, the lockup still occurs. Set it back to 1.1 since that seems
to cause less problems for the moment.

Interestingly enough, with noapic, the kernel doesn't seem to enable the
nmi watchdog, even when using nmi_watchdog=1.

Weird.

On Mon, 22 Oct 2001, Mark Hahn wrote:

> Date: Mon, 22 Oct 2001 13:25:57 -0400 (EDT)
> From: Mark Hahn <hahn@physics.mcmaster.ca>
> To: PinkFreud <pf-kernel@mirkwood.net>
> Subject: Re: email address (was SMP lockup with 2.4.12 on VIA chipset
> (still does it))
>
> > Yes. MPS 1.1 is currently set in BIOS. Should it be set to 1.4?
>
> some people report more trouble with 1.4 (since that enables
> the >15 IRQ's, etc). but obviously, it's a good thing to try
> if you can't get it working!
>
>
> >
> >
> > On Mon, 22 Oct 2001, Mark Hahn wrote:
> >
> > > Date: Mon, 22 Oct 2001 12:12:44 -0400 (EDT)
> > > From: Mark Hahn <hahn@physics.mcmaster.ca>
> > > To: PinkFreud <pf-kernel@mirkwood.net>
> > > Subject: Re: email address (was SMP lockup with 2.4.12 on VIA chipset
> > > (still does it))
> > >
> > > > Yep. Just as I remembered it - adding 'noapic' to the kernel command line
> > > > had no effect. The system still locks up.
> > > >
> > > > Kernel command line: auto BOOT_IMAGE=Linux ro root=301 noapic
> > > > nmi_watchdog=1 console=tty0 console=ttyS0,115200
> > >
> > > MPS 1.1 set in bios?
> > >
> > >
> > >
> > > >
> > > >
> > > > On Mon, 22 Oct 2001, Ken Brownfield wrote:
> > > >
> > > > > Date: Mon, 22 Oct 2001 07:09:47 -0500
> > > > > From: Ken Brownfield <brownfld@irridia.com>
> > > > > To: PinkFreud <pf-kernel@mirkwood.net>
> > > > > Subject: Re: email address (was SMP lockup with 2.4.12 on VIA chipset
> > > > > (still does it))
> > > > >
> > > > > My original response to you was to boot with "noapic" on the kernel
> > > > > command line. But you might want to try the posted patch first. I'd
> > > > > bet a dollar that "noapic" fixes your problem. And let the list know if
> > > > > it does -- maybe with enough people posting someone will look at this
> > > > > APIC issue that's existed at least since 2.4.0-test1.
> > > > >
> > > > > Thx,
> > > > > --
> > > > > Ken.
> > > > >
> > > > > On Sun, Oct 21, 2001 at 10:25:44PM -0400, PinkFreud wrote:
> > > > > | Doh. Someone pointed out that this email address wasn't working. That
> > > > > | should be fixed now. Any replies to this address should now get to
> > > > > | me. :)
> > > > > |
> > > > > | <smacks forehead>
> > > > > |
> > > > > |
> > > > > | On Sat, 20 Oct 2001, PinkFreud wrote:
> > > > > |
> > > > > | > Date: Sat, 20 Oct 2001 14:57:12 -0400 (EDT)
> > > > > | > From: PinkFreud <pf-kernel@mirkwood.net>
> > > > > | > To: linux-kernel@vger.kernel.org
> > > > > | > Subject: SMP lockup with 2.4.12 on VIA chipset (still does it)
> > > > > | >
> > > > > | > *PLEASE* CC: me in any replies, I am not subscribed to this list. Thanks.
> > > > > | >
> > > > > | > Ok, all. I finally got some time (and a null modem cable) to look at this
> > > > > | > lockup a bit more. To refresh everyone's memory, this is a dual CPU PIII
> > > > > | > on a VIA chipset with a Matrox G400. If I start X, switch to a text
> > > > > | > console, and switch back to X, there's a 99% chance the box will lock up -
> > > > > | > no keyboard, mouse, or network. (This was brought up two months ago in
> > > > > | > the 'Are we going too fast?' thread.)
> > > > > | >
> > > > > | > Included at the bottom of this message are the kernel messages upon
> > > > > | > boot. NMI watchdog reported absolutely NOTHING when the lockup
> > > > > | > occured. Note that these messages are from the boot after the crash -
> > > > > | > you'll notice that NMI watchdog is now reporting it's stuck on CPU#0. In
> > > > > | > the first boot (before the lockup), NMI watchdog seemed to be fine:
> > > > > | > testing NMI watchdog ... OK.
> > > > > | >
> > > > > | > Please note that this lockup does *NOT* happen with 2.2.19 with SMP, nor
> > > > > | > does it happen with 2.4.x WITHOUT SMP. Therefore, I would think
> > > > > | > whatever's causing this has to do with something that changed in SMP
> > > > > | > between 2.2.x and 2.4.x. Please feel free to yell at me if I should post
> > > > > | > this elsewhere.
> > > > > | >
> > > > > | > Without further ado, I present eriador's boot messages:
> > > > > | >
> > > > > | > Linux version 2.4.12 (root@eriador) (gcc version 2.95.3 20010315 (release)) #1 SMP Sat Oct 20 01:53:08 EDT 2001
> > > > > | > BIOS-provided physical RAM map:
> > > > > | > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> > > > > | > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> > > > > | > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> > > > > | > BIOS-e820: 0000000000100000 - 0000000000f00000 (usable)
> > > > > | > BIOS-e820: 0000000000f00000 - 0000000001000000 (reserved)
> > > > > | > BIOS-e820: 0000000001000000 - 0000000020000000 (usable)
> > > > > | > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> > > > > | > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> > > > > | > BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> > > > > | > found SMP MP-table at 000fb170
> > > > > | > hm, page 000fb000 reserved twice.
> > > > > | > hm, page 000fc000 reserved twice.
> > > > > | > hm, page 000f5000 reserved twice.
> > > > > | > hm, page 000f6000 reserved twice.
> > > > > | > On node 0 totalpages: 131072
> > > > > | > zone(0): 4096 pages.
> > > > > | > zone(1): 126976 pages.
> > > > > | > zone(2): 0 pages.
> > > > > | > Intel MultiProcessor Specification v1.1
> > > > > | > Virtual Wire compatibility mode.
> > > > > | > OEM ID: VIA Product ID: VT3075 APIC at: 0xFEE00000
> > > > > | > Processor #0 Pentium(tm) Pro APIC version 17
> > > > > | > Processor #1 Pentium(tm) Pro APIC version 17
> > > > > | > I/O APIC #2 Version 17 at 0xFEC00000.
> > > > > | > Processors: 2
> > > > > | > Kernel command line: BOOT_IMAGE=Linux ro root=301 nmi_watchdog=1 console=ttyS0,115200
> > > > > | > Initializing CPU#0
> > > > > | > Detected 1000.221 MHz processor.
> > > > > | > Console: colour VGA+ 80x25
> > > > > | > Calibrating delay loop... 1992.29 BogoMIPS
> > > > > | > Memory: 512604k/524288k available (1039k kernel code, 10272k reserved, 394k data, 220k init, 0k highmem)
> > > > > | > Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
> > > > > | > Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> > > > > | > Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
> > > > > | > Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
> > > > > | > Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
> > > > > | > CPU: L1 I cache: 16K, L1 D cache: 16K
> > > > > | > CPU: L2 cache: 256K
> > > > > | > Intel machine check architecture supported.
> > > > > | > Intel machine check reporting enabled on CPU#0.
> > > > > | > Enabling fast FPU save and restore... done.
> > > > > | > Enabling unmasked SIMD FPU exception support... done.
> > > > > | > Checking 'hlt' instruction... OK.
> > > > > | > POSIX conformance testing by UNIFIX
> > > > > | > mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> > > > > | > mtrr: detected mtrr type: Intel
> > > > > | > CPU: L1 I cache: 16K, L1 D cache: 16K
> > > > > | > CPU: L2 cache: 256K
> > > > > | > Intel machine check reporting enabled on CPU#0.
> > > > > | > CPU0: Intel Pentium III (Coppermine) stepping 06
> > > > > | > per-CPU timeslice cutoff: 731.00 usecs.
> > > > > | > enabled ExtINT on CPU#0
> > > > > | > ESR value before enabling vector: 00000004
> > > > > | > ESR value after enabling vector: 00000000
> > > > > | > Booting processor 1/1 eip 2000
> > > > > | > Initializing CPU#1
> > > > > | > masked ExtINT on CPU#1
> > > > > | > ESR value before enabling vector: 00000000
> > > > > | > ESR value after enabling vector: 00000000
> > > > > | > Calibrating delay loop... 1998.84 BogoMIPS
> > > > > | > CPU: L1 I cache: 16K, L1 D cache: 16K
> > > > > | > CPU: L2 cache: 256K
> > > > > | > Intel machine check reporting enabled on CPU#1.
> > > > > | > CPU1: Intel Pentium III (Coppermine) stepping 06
> > > > > | > Total of 2 processors activated (3991.14 BogoMIPS).
> > > > > | > ENABLING IO-APIC IRQs
> > > > > | > Setting 2 in the phys_id_present_map
> > > > > | > ...changing IO-APIC physical APIC ID to 2 ... ok.
> > > > > | > ..TIMER: vector=0x31 pin1=2 pin2=0
> > > > > | > activating NMI Watchdog ... done.
> > > > > | > testing NMI watchdog ... CPU#0: NMI appears to be stuck!
> > > > > | > testing the IO APIC.......................
> > > > > | >
> > > > > | > .................................... done.
> > > > > | > Using local APIC timer interrupts.
> > > > > | > calibrating APIC timer ...
> > > > > | > ..... CPU clock speed is 1000.0940 MHz.
> > > > > | > ..... host bus clock speed is 133.3457 MHz.
> > > > > | > cpu: 0, clocks: 1333457, slice: 444485
> > > > > | > CPU0<T0:1333456,T1:888960,D:11,S:444485,C:1333457>
> > > > > | > cpu: 1, clocks: 1333457, slice: 444485
> > > > > | > CPU1<T0:1333456,T1:444480,D:6,S:444485,C:1333457>
> > > > > | > checking TSC synchronization across CPUs: passed.
> > > > > | > Waiting on wait_init_idle (map = 0x2)
> > > > > | > All processors have done init_idle
> > > > > | > mtrr: your CPUs had inconsistent variable MTRR settings
> > > > > | > mtrr: probably your BIOS does not setup all CPUs
> > > > > | > PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
> > > > > | > PCI: Using configuration type 1
> > > > > | > PCI: Probing PCI hardware
> > > > > | > PCI: Using IRQ router VIA [1106/0686] at 00:07.0
> > > > > | > PCI: Enabling Via external APIC routing
> > > > > | > Linux NET4.0 for Linux 2.4
> > > > > | > Based upon Swansea University Computer Society NET3.039
> > > > > | > Initializing RT netlink socket
> > > > > | > apm: BIOS not found.
> > > > > | > Starting kswapd
> > > > > | > VFS: Diskquotas version dquot_6.4.0 initialized
> > > > > | > ACPI: System description tables not found
> > > > > | > ACPI-0076: *** Error: Acpi_load_tables: Could not get RSDP, AE_ERROR
> > > > > | > ACPI-0124: *** Error: Acpi_load_tables: Could not load tables: AE_ERROR
> > > > > | > ACPI: System description table load failed
> > > > > | > pty: 256 Unix98 ptys configured
> > > > > | > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
> > > > > | > ttyS00 at 0x03f8 (irq = 4) is a 16550A
> > > > > | > Real Time Clock Driver v1.10e
> > > > > | > block: 128 slots per queue, batch=16
> > > > > | > Uniform Multi-Platform E-IDE driver Revision: 6.31
> > > > > | > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > > > > | > VP_IDE: IDE controller on PCI bus 00 kdev 39
> > > > > | > VP_IDE: chipset revision 16
> > > > > | > VP_IDE: not 100% native mode: will probe irqs later
> > > > > | > hda: WDC WD205AA, ATA DISK drive
> > > > > | > hdb: WDC WD307AA, ATA DISK drive
> > > > > | > hdc: Pioneer DVD-ROM ATAPIModel DVD-116 0107, ATAPI CD/DVD-ROM drive
> > > > > | > hdd: LS-120 VER5 00 UHD Floppy, ATAPI FLOPPY drive
> > > > > | > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > > > > | > ide1 at 0x170-0x177,0x376 on irq 15
> > > > > | > hda: 40079088 sectors (20520 MB) w/2048KiB Cache, CHS=2494/255/63
> > > > > | > hdb: 60074784 sectors (30758 MB) w/2048KiB Cache, CHS=3739/255/63
> > > > > | > Partition check:
> > > > > | > hda: hda1 hda2 hda3
> > > > > | > hdb: hdb1
> > > > > | > SCSI subsystem driver Revision: 1.00
> > > > > | > Linux Kernel Card Services 3.1.22
> > > > > | > options: [pci] [cardbus] [pm]
> > > > > | > Intel PCIC probe: not found.
> > > > > | > NET4: Linux TCP/IP 1.0 for NET4.0
> > > > > | > IP Protocols: ICMP, UDP, TCP, IGMP
> > > > > | > IP: routing cache hash table of 4096 buckets, 32Kbytes
> > > > > | > TCP: Hash tables configured (established 131072 bind 65536)
> > > > > | > ds: no socket drivers loaded!
> > > > > | > VFS: Mounted root (ext2 filesystem) readonly.
> > > > > | > Freeing unused kernel memory: 220k freed
> > > > > | > INIT: version 2.76 booting
> > > > > | > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> > > > > |
> > > > > |
> > > > > | Mike Edwards
> > > > > |
> > > > > | Brainbench certified Master Linux Administrator
> > > > > | http://www.brainbench.com/transcript.jsp?pid=158188
> > > > > | -----------------------------------
> > > > > | Unsolicited advertisments to this address are not welcome.
> > > > > |
> > > > > | -
> > > > > | To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > > > > | the body of a message to majordomo@vger.kernel.org
> > > > > | More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > > > | Please read the FAQ at http://www.tux.org/lkml/
> >
> >
> > Mike Edwards
> >
> > Brainbench certified Master Linux Administrator
> > http://www.brainbench.com/transcript.jsp?pid=158188
> > -----------------------------------
> > Unsolicited advertisments to this address are not welcome.
> >
>
> --
> operator may differ from spokesperson. hahn@coffee.mcmaster.ca
> http://java.mcmaster.ca/~hahn
>
>

Mike Edwards

Brainbench certified Master Linux Administrator
http://www.brainbench.com/transcript.jsp?pid=158188
-----------------------------------
Unsolicited advertisments to this address are not welcome.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/