processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 551.255
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse
bogomips : 1101.00
[7.3]
tvaudio 8208 0 (autoclean) (unused)
bttv 57904 2 (autoclean)
msp3400 13904 0 (autoclean) (unused)
tuner 3296 1 (autoclean)
i2c-algo-bit 7296 2 (autoclean) [bttv]
i2c-core 12112 0 (autoclean) [tvaudio bttv msp3400 tuner
i2c-algo-bit]
videodev 4960 6 (autoclean) [bttv]
rtc 6320 0 (unused)
ip_nat_ftp 4080 0 (unused)
ip_conntrack_ftp 2560 0 [ip_nat_ftp]
ipt_MASQUERADE 2048 1 (autoclean)
iptable_filter 1920 0 (autoclean) (unused)
iptable_nat 19520 1 [ip_nat_ftp ipt_MASQUERADE]
ip_conntrack 22848 2 [ip_nat_ftp ip_conntrack_ftp
ipt_MASQUERADE iptable_nat]
ip_tables 13216 5 [ipt_MASQUERADE iptable_filter
iptable_nat]
vmnet 16960 3
vmmon 18288 0 (unused)
eepro100 17312 1 (autoclean)
st 27664 0 (unused)
nls_iso8859-1 2832 5 (autoclean)
nls_cp437 4352 5 (autoclean)
vfat 11696 5 (autoclean)
fat 32480 0 (autoclean) [vfat]
es1371 31056 5 (autoclean)
ac97_codec 7952 0 (autoclean) [es1371]
soundcore 3920 4 (autoclean) [es1371]
unix 16816 116 (autoclean)
[7.4]
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02e8-02ef : serial(set)
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
0400-043f : Intel Corporation 82371AB PIIX4 ACPI
0800-081f : Intel Corporation 82371AB PIIX4 ACPI
0cf8-0cff : PCI conf1
9000-9fff : PCI Bus #01
9000-90ff : 3Dfx Interactive, Inc. Voodoo 3
a000-afff : PCI Bus #02
a000-a0ff : Adaptec 7896
a000-a0fe : aic7xxx
a400-a4ff : Adaptec 7896 (#2)
a400-a4fe : aic7xxx
b000-b03f : Ensoniq ES1371 [AudioPCI-97]
b000-b03f : es1371
b0c0-b0df : Intel Corporation 82557 [Ethernet Pro 100]
b0c0-b0df : eepro100
b400-b41f : Intel Corporation 82371AB PIIX4 USB
b440-b44f : Intel Corporation 82371AB PIIX4 IDE
b440-b447 : ide0
00000000-0009efff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-1fffffff : System RAM
00100000-001ea9c5 : Kernel code
001ea9c6-0023a55f : Kernel data
80100000-840fffff : PCI Bus #01
82000000-83ffffff : 3Dfx Interactive, Inc. Voodoo 3
84100000-841fffff : PCI Bus #02
84100000-84100fff : Adaptec 7896
84101000-84101fff : Adaptec 7896 (#2)
84300000-880fffff : PCI Bus #01
86000000-87ffffff : 3Dfx Interactive, Inc. Voodoo 3
88100000-881fffff : PCI Bus #02
88100000-88100fff : Brooktree Corporation Bt878 (#2)
88100000-88100fff : bttv
88101000-88101fff : Brooktree Corporation Bt878 (#2)
88200000-88200fff : Brooktree Corporation Bt878
88200000-88200fff : bttv
88201000-88201fff : Brooktree Corporation Bt878
88300000-883fffff : Intel Corporation 82557 [Ethernet Pro 100]
88600000-88600fff : Intel Corporation 82557 [Ethernet Pro 100]
88600000-88600fff : eepro100
e0000000-e3ffffff : Intel Corporation 440GX - 82443GX Host bridge
[7.5]
00:00.0 Host bridge: Intel Corporation 440GX - 82443GX Host bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64 set
Region 0: Memory at e0000000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=21
Command: RQ=31 SBA+ AGP- 64bit- FW- Rate=21
00:01.0 PCI bridge: Intel Corporation 440GX - 82443GX AGP bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: 80100000-840fffff
Prefetchable memory behind bridge: 84300000-880fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 set
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
(prog-if 80)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 224 set
Region 4: I/O ports at b440
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 224 set
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at b400
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:0d.0 Multimedia audio controller: Ensoniq ES1371 (rev 08)
Subsystem: Unknown device 1274:1371
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort+ <MAbort- >SERR- <PERR-
Latency: 12 min, 128 max, 224 set
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at b000
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI+ D1- D2+ PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 Multimedia video controller: Brooktree Corporation Bt878 (rev
02)
Subsystem: Unknown device 1851:1851
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 16 min, 40 max, 224 set
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 88200000 (32-bit, prefetchable)
00:0e.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: Unknown device 1851:1851
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 4 min, 255 max, 224 set
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 88201000 (32-bit, prefetchable)
00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 224 set, cache line size 08
Bus: primary=00, secondary=02, subordinate=02, sec-latency=224
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: 84100000-841fffff
Prefetchable memory behind bridge:
0000000088100000-0000000088100000
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:10.0 Ethernet controller: Intel Corporation 82557 (rev 05)
Subsystem: Unknown device 8086:0008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 56 max, 224 set, cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 88600000 (32-bit, prefetchable)
Region 1: I/O ports at b0c0
Region 2: Memory at 88300000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr+ DSI+ D1+ D2+ PME+
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: 3Dfx Interactive, Inc.: Unknown
device 0005 (rev 01)
Subsystem: Unknown device 121a:003a
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 82000000 (32-bit, non-prefetchable)
Region 1: Memory at 86000000 (32-bit, prefetchable)
Region 2: I/O ports at 9000
Capabilities: [54] AGP version 1.0
Status: RQ=7 SBA+ 64bit+ FW- Rate=21
Command: RQ=7 SBA+ AGP- 64bit+ FW- Rate=21
Capabilities: [60] Power Management version 1
Flags: PMEClk- AuxPwr- DSI+ D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:04.0 Multimedia video controller: Brooktree Corporation Bt878 (rev
02)
Subsystem: Unknown device 0070:13eb
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 16 min, 40 max, 224 set
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 88100000 (32-bit, prefetchable)
02:04.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: Unknown device 0070:13eb
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 4 min, 255 max, 224 set
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 88101000 (32-bit, prefetchable)
02:09.0 SCSI storage controller: Adaptec 7896
Subsystem: Unknown device 9005:080f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 39 min, 25 max, 224 set, cache line size 08
Interrupt: pin A routed to IRQ 23
BIST result: 00
Region 0: I/O ports at a000
Region 1: Memory at 84100000 (64-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:09.1 SCSI storage controller: Adaptec 7896
Subsystem: Unknown device 9005:080f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 39 min, 25 max, 224 set, cache line size 08
Interrupt: pin A routed to IRQ 23
BIST result: 00
Region 0: I/O ports at a400
Region 1: Memory at 84101000 (64-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6]
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DRVS09D Rev: 0270
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: DRVS09D Rev: 0140
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 02 Lun: 00
Vendor: IBM Model: DRVS09D Rev: 0270
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 03 Lun: 00
Vendor: SEAGATE Model: ST39103LC Rev: 0002
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 06 Lun: 00
Vendor: SEAGATE Model: DAT 06240-XXX Rev: 8071
Type: Sequential-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: ATAPI Model: CD-ROM DRIVE-40X Rev: T0DP
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 01 Lun: 00
Vendor: HP Model: CD-Writer+ 7200 Rev: 3.01
Type: CD-ROM ANSI SCSI revision: 02
[7.7]
Output from messages:
Jan 14 11:17:23 shockwave kernel: scsi1 channel 0 : resetting for second
half of retries.
Jan 14 11:17:23 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:17:25 shockwave kernel: SCSI host 1 channel 0 reset (pid 0)
timed out - trying harder
Jan 14 11:17:25 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:17:25 shockwave kernel: SCSI host 1 reset (pid 0) timed out
again -
Jan 14 11:17:25 shockwave kernel: probably an unrecoverable SCSI bus or
device hang.
Jan 14 11:17:27 shockwave kernel: (scsi1:0:0:0) Synchronous at 80.0
Mbyte/sec, offset 15.
Jan 14 11:17:27 shockwave kernel: (scsi1:0:1:0) Synchronous at 80.0
Mbyte/sec, offset 15.
Jan 14 11:17:27 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:17:27 shockwave kernel: st0: Error with sense data: [valid=0]
Info fld=0x0, Current st09:00: sns = 70 6
Jan 14 11:17:27 shockwave kernel: ASC=29 ASCQ= 0
Jan 14 11:17:27 shockwave kernel: Raw sense data:0x70 0x00 0x06 0x00
0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x29 0x00 0x00 0x00 0x01 0x01
Jan 14 11:17:37 shockwave kernel: scsi : aborting command due to timeout
: pid 0, scsi1, channel 0, id 6, lun 0 0x1e 00 00 00 01 00
Jan 14 11:17:47 shockwave kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Jan 14 11:17:47 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:17:51 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:18:01 shockwave kernel: SCSI host 1 channel 0 reset (pid 0)
timed out - trying harder
Jan 14 11:18:01 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:18:05 shockwave kernel: (scsi1:0:1:0) Synchronous at 80.0
Mbyte/sec, offset 15.
Jan 14 11:18:05 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:18:15 shockwave kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Jan 14 11:18:15 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:18:19 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:18:30 shockwave kernel: SCSI host 1 channel 0 reset (pid 0)
timed out - trying harder
Jan 14 11:18:30 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:18:33 shockwave kernel: (scsi1:0:1:0) Synchronous at 80.0
Mbyte/sec, offset 15.
Jan 14 11:18:33 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:18:43 shockwave kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Jan 14 11:18:43 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:18:47 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:18:57 shockwave kernel: scsi : aborting command due to timeout
: pid 0, scsi1, channel 0, id 6, lun 0 0x1e 00 00 00 01 00
Jan 14 11:19:07 shockwave kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Jan 14 11:19:07 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:19:11 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:19:22 shockwave kernel: SCSI host 1 channel 0 reset (pid 0)
timed out - trying harder
Jan 14 11:19:22 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:19:25 shockwave kernel: (scsi1:0:1:0) Synchronous at 80.0
Mbyte/sec, offset 15.
Jan 14 11:19:25 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:19:35 shockwave kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Jan 14 11:19:35 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:19:39 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:19:50 shockwave kernel: SCSI host 1 channel 0 reset (pid 0)
timed out - trying harder
Jan 14 11:19:50 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:19:54 shockwave kernel: (scsi1:0:1:0) Synchronous at 80.0
Mbyte/sec, offset 15.
Jan 14 11:19:54 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:20:04 shockwave kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Jan 14 11:20:04 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:20:08 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:20:18 shockwave kernel: scsi : aborting command due to timeout
: pid 0, scsi1, channel 0, id 6, lun 0 0x1e 00 00 00 01 00
Jan 14 11:20:28 shockwave kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Jan 14 11:20:28 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:20:32 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:20:43 shockwave kernel: SCSI host 1 channel 0 reset (pid 0)
timed out - trying harder
Jan 14 11:20:43 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:20:46 shockwave kernel: (scsi1:0:1:0) Synchronous at 80.0
Mbyte/sec, offset 15.
Jan 14 11:20:46 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:20:56 shockwave kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Jan 14 11:20:56 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:21:00 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:21:11 shockwave kernel: SCSI host 1 channel 0 reset (pid 0)
timed out - trying harder
Jan 14 11:21:11 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:21:14 shockwave kernel: (scsi1:0:1:0) Synchronous at 80.0
Mbyte/sec, offset 15.
Jan 14 11:21:14 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:21:24 shockwave kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Jan 14 11:21:24 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:21:28 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
Jan 14 11:21:38 shockwave kernel: scsi : aborting command due to timeout
: pid 0, scsi1, channel 0, id 6, lun 0 0x1e 00 00 00 01 00
Jan 14 11:21:48 shockwave kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Jan 14 11:21:48 shockwave kernel: SCSI bus is being reset for host 1
channel 0.
Jan 14 11:21:52 shockwave kernel: (scsi1:0:6:0) Synchronous at 80.0
Mbyte/sec, offset 32.
[X.]
I can generate a hang every couple of hours by doing heavy disc IO. If
I remove a processor, I can stay up at least 48 hours under a heavy
load. If anyone needs more info I can be reached at bruce@linux2go.org
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/