Hum, unlinkd is part of squid, master and pickup are part of postfix ;)
> If e100. You have the hardware...
[cut]
> > I'm a bit worried about these MCEs, but the machine seems stable after
> > resume (btw, I remeber that Alan once posted a MCE decoder, but can't
> > find it - any clue?).
>
> Not sure what it is. MCEs should be hardware fault, always...
If I rmmod e100 before sleeping everything is fine, but I still get
those MCEs.
> > Fixing swap signatures... <3>bad: scheduling while atomic!
> > Call Trace:
> > [<c012419e>] schedule+0x6ce/0x6e0
> > [<c02a219d>] generic_make_request+0x17d/0x210
> > [<c01272d0>] autoremove_wake_function+0x0/0x50
> > [<c012641e>] io_schedule+0xe/0x20
> > [<c0150522>] wait_on_page_bit+0xa2/0xd0
> > [<c01272d0>] autoremove_wake_function+0x0/0x50
> > [<c01272d0>] autoremove_wake_function+0x0/0x50
> > [<c017194b>] swap_readpage+0x5b/0x80
> > [<c0171a2a>] rw_swap_page_sync+0xba/0x110
> > [<c014d8be>] mark_swapfiles+0x7e/0x1b0
> > [<c014ea35>] do_magic_resume_2+0xe5/0x170
> > [<c011d410>] restore_processor_state+0x70/0x90
> > [<c011ff5f>] do_magic+0x11f/0x140
> > [<c014ef1d>] do_software_suspend+0x6d/0xa0
> > [<c023e3cc>] acpi_system_write_sleep+0x11b/0x132
> > [<c0177de0>] filp_open+0x60/0x70
> > [<c017952d>] vfs_write+0xad/0x120
> > [<c017963f>] sys_write+0x3f/0x60
> > [<c010b10f>] syscall_call+0x7/0xb
>
> Ahha, this looks like generic problem. I'll probably take a look...
This isn't e100 related. I can reproduce it without e100:
Freeing prev allocated pagedir
Debug: sleeping function called from illegal context at include/linux/rwsem.h:66Call Trace:
[<c01268bf>] __might_sleep+0x5f/0xa0
[<c029b712>] sysdev_restore+0x22/0x135
[<c029bd80>] device_resume+0xc0/0xd0
[<c014e60c>] drivers_resume+0x8c/0xa0
[<c014ea15>] do_magic_resume_2+0xc5/0x170
[<c011d410>] restore_processor_state+0x70/0x90
[<c011ff5f>] do_magic+0x11f/0x140
[<c014ef1d>] do_software_suspend+0x6d/0xa0
[<c023e3cc>] acpi_system_write_sleep+0x11b/0x132
[<c0177de0>] filp_open+0x60/0x70
[<c017952d>] vfs_write+0xad/0x120
[<c017963f>] sys_write+0x3f/0x60
[<c010b10f>] syscall_call+0x7/0xb
[IDE disks return to life]
Fixing swap signatures... <3>bad: scheduling while atomic!
Call Trace:
[<c012419e>] schedule+0x6ce/0x6e0
[<c02a219d>] generic_make_request+0x17d/0x210
[<c01272d0>] autoremove_wake_function+0x0/0x50
[<c012641e>] io_schedule+0xe/0x20
[<c0150522>] wait_on_page_bit+0xa2/0xd0
[<c01272d0>] autoremove_wake_function+0x0/0x50
[<c01272d0>] autoremove_wake_function+0x0/0x50
[<c017194b>] swap_readpage+0x5b/0x80
[<c0171a2a>] rw_swap_page_sync+0xba/0x110
[<c014d8be>] mark_swapfiles+0x7e/0x1b0
[<c014ea35>] do_magic_resume_2+0xe5/0x170
[<c011d410>] restore_processor_state+0x70/0x90
[<c011ff5f>] do_magic+0x11f/0x140
[<c014ef1d>] do_software_suspend+0x6d/0xa0
[<c023e3cc>] acpi_system_write_sleep+0x11b/0x132
[<c0177de0>] filp_open+0x60/0x70
[<c017952d>] vfs_write+0xad/0x120
[<c017963f>] sys_write+0x3f/0x60
[<c010b10f>] syscall_call+0x7/0xb
bad: scheduling while atomic!
Call Trace:
[<c012419e>] schedule+0x6ce/0x6e0
[<c012641e>] io_schedule+0xe/0x20
[<c0150522>] wait_on_page_bit+0xa2/0xd0
[<c01272d0>] autoremove_wake_function+0x0/0x50
[<c01272d0>] autoremove_wake_function+0x0/0x50
[<c0171780>] end_swap_bio_write+0x0/0x50
[<c0171a2a>] rw_swap_page_sync+0xba/0x110
[<c014d931>] mark_swapfiles+0xf1/0x1b0
[<c014ea35>] do_magic_resume_2+0xe5/0x170
[<c011d410>] restore_processor_state+0x70/0x90
[<c011ff5f>] do_magic+0x11f/0x140
[<c014ef1d>] do_software_suspend+0x6d/0xa0
[<c023e3cc>] acpi_system_write_sleep+0x11b/0x132
[<c0177de0>] filp_open+0x60/0x70
[<c017952d>] vfs_write+0xad/0x120
[<c017963f>] sys_write+0x3f/0x60
[<c010b10f>] syscall_call+0x7/0xb
ok
Restarting processes...
Restarting tasks... done
bad: scheduling while atomic!
Call Trace:
[<c012419e>] schedule+0x6ce/0x6e0
[<c017963f>] sys_write+0x3f/0x60
[<c010b136>] work_resched+0x5/0x16
And then the oops:
> Unable to handle kernel paging request at virtual address 40107114
> > printing eip:
> > 40107114
> > *pde = 2dbf6067
> > *pte = 00000000
> > Oops: 0004 [#1]
> > CPU: 0
> > EIP: 0073:[<40107114>] Not tainted
> > EFLAGS: 00010202
> > EIP is at 0x40107114
> > eax: ffffffea ebx: 00000001 ecx: 080d440c edx: 00000002
> > esi: 00000002 edi: 080d440c ebp: bffffae8 esp: bffffab8
> > ds: 007b es: 007b ss: 007b
> > Process bash (pid: 484, threadinfo=ed776000 task=ef1e40c0)
> > <6>note: bash[484] exited with preempt_count 1
> > pdflush left refrigerator
> > e100: eth0 NIC Link is Up 10 Mbps Half duplex
> >
> > ksymoops says:
> >
> > Warning (Oops_read): Code line not seen, dumping what data is available
> >
> >
> > >>EIP; 40107114 Before first symbol <=====
> >
> > >>eax; ffffffea <__kernel_rt_sigreturn+1baa/????>
>
> That's bad. Error outside of kernel. Not sure what is wrong.
Note that if suspend after booting with "single" (ie. with only init,
agetty and bash running) the other warnings go away, but I still see the
above oops.
HTH,
Luca
-- Reply-To: kronos@kronoz.cjb.net Home: http://kronoz.cjb.net Il dottore mi ha detto di smettere di fare cene intime per quattro. A meno che non ci siamo altre tre persone. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/