Thanks to Venkatesh Pallipadi, I made some progress on that problem.
I recompiled 2.4.21-ac2 and activated the CONFIG_X86_CLUSTERED_APIC
Now with HT activated in the BIOS, the machine is able to boot but only
half of the processors are detected :-(
I've attached my .config and the result of dmesg just after booting.
I've surely missed something so ask again for your kind support.
Thanks in advance for your help.
Bruno Cornec (Bruno.Cornec@hp.com) said:
(Distro SuSE SLES8 - kernel 2.4.21-ac2)
--------------------------------------------------------------------
The latest BIOS has been put on the system (P44 - 2003-02-18)
--------------------------------------------------------------------
cat /proc/cmdline :
root=/dev/cciss/c0d0p1 ide=nodma (16 CPUs)
--------------------------------------------------------------------
boot.msg
Inspecting /boot/System.map
Loaded 18441 symbols from /boot/System.map.
Symbols match kernel version 2.4.21.
No module symbols loaded.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.21-ac2 (root@linux) (gcc version 3.2) #1 SMP Tue Jun 24 11:09:11 CEST 2003
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
<4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 00000000efff0000 (usable)
<4> BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
<4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<4> BIOS-e820: 0000000100000000 - 000000040ffff000 (usable)
<5>15743MB HIGHMEM available.
<5>896MB LOWMEM available.
<4>found SMP MP-table at 000f4fd0
<4>hm, page 000f4000 reserved twice.
<4>hm, page 000f5000 reserved twice.
<4>hm, page 000f7000 reserved twice.
<4>hm, page 000f8000 reserved twice.
<4>On node 0 totalpages: 4259839
<4>zone(0): 4096 pages.
<4>zone(1): 225280 pages.
<4>zone(2): 4030463 pages.
<4>Intel MultiProcessor Specification v1.4
<4> Virtual Wire compatibility mode.
<4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
<4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
<4>Processor #2 Pentium 4(tm) XEON(tm) APIC version 20
<4>Processor #4 Pentium 4(tm) XEON(tm) APIC version 20
<4>Processor #6 Pentium 4(tm) XEON(tm) APIC version 20
<4>Processor #8 Pentium 4(tm) XEON(tm) APIC version 20
<4>Processor #10 Pentium 4(tm) XEON(tm) APIC version 20
<4>Processor #12 Pentium 4(tm) XEON(tm) APIC version 20
<4>Processor #14 Pentium 4(tm) XEON(tm) APIC version 20
<4>I/O APIC #8 Version 17 at 0xFEC00000.
<4>I/O APIC #9 Version 17 at 0xFEC01000.
<4>I/O APIC #10 Version 17 at 0xFEC02000.
<4>Processors: 8
<4>xAPIC support is present
<4>Enabling APIC mode: Flat. Using 3 I/O APICs
<4>Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma
<6>ide_setup: ide=nodma : Prevented DMA
<6>Initializing CPU#0
<4>Detected 1999.337 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 3984.58 BogoMIPS
<6>Memory: 16573608k/17039356k available (1617k kernel code, 203152k reserved, 376k data, 288k init, 15859644k highmem)
<6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>Inode cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 524288 (order: 9, 2097152 bytes)
<4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: L3 cache: 2048K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: L3 cache: 2048K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
<4>per-CPU timeslice cutoff: 1462.74 usecs.
<4>task migration cache decay timeout: 10 msecs.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Booting processor 1/2 eip 2000
<6>Initializing CPU#1
<4>masked ExtINT on CPU#1
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 3997.69 BogoMIPS
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: L3 cache: 2048K
<6>CPU: Physical Processor ID: 1
<6>Intel machine check reporting enabled on CPU#1.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
<4>Booting processor 2/4 eip 2000
<6>Initializing CPU#2
<4>masked ExtINT on CPU#2
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 3997.69 BogoMIPS
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: L3 cache: 2048K
<6>CPU: Physical Processor ID: 2
<6>Intel machine check reporting enabled on CPU#2.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
<4>Booting processor 3/6 eip 2000
<6>Initializing CPU#3
<4>masked ExtINT on CPU#3
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 3997.69 BogoMIPS
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: L3 cache: 2048K
<6>CPU: Physical Processor ID: 3
<6>Intel machine check reporting enabled on CPU#3.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
<4>Booting processor 4/8 eip 2000
<6>Initializing CPU#4
<4>masked ExtINT on CPU#4
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 3997.69 BogoMIPS
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: L3 cache: 2048K
<6>CPU: Physical Processor ID: 4
<6>Intel machine check reporting enabled on CPU#4.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
<4>Booting processor 5/10 eip 2000
<6>Initializing CPU#5
<4>masked ExtINT on CPU#5
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 3997.69 BogoMIPS
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: L3 cache: 2048K
<6>CPU: Physical Processor ID: 5
<6>Intel machine check reporting enabled on CPU#5.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
<4>Booting processor 6/12 eip 2000
<6>Initializing CPU#6
<4>masked ExtINT on CPU#6
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 3997.69 BogoMIPS
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: L3 cache: 2048K
<6>CPU: Physical Processor ID: 6
<6>Intel machine check reporting enabled on CPU#6.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
<4>Booting processor 7/14 eip 2000
<6>Initializing CPU#7
<4>masked ExtINT on CPU#7
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 3997.69 BogoMIPS
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: L3 cache: 2048K
<6>CPU: Physical Processor ID: 7
<6>Intel machine check reporting enabled on CPU#7.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
<6>Total of 8 processors activated (31968.46 BogoMIPS).
<4>WARNING: No sibling found for CPU 0.
<4>WARNING: No sibling found for CPU 1.
<4>WARNING: No sibling found for CPU 2.
<4>WARNING: No sibling found for CPU 3.
<4>WARNING: No sibling found for CPU 4.
<4>WARNING: No sibling found for CPU 5.
<4>WARNING: No sibling found for CPU 6.
<4>WARNING: No sibling found for CPU 7.
<4>ENABLING IO-APIC IRQs
<4>Setting 8 in the phys_id_present_map
<6>...changing IO-APIC physical APIC ID to 8 ... ok.
<4>Setting 9 in the phys_id_present_map
<6>...changing IO-APIC physical APIC ID to 9 ... ok.
<4>Setting 10 in the phys_id_present_map
<6>...changing IO-APIC physical APIC ID to 10 ... ok.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 8-0, 8-3, 8-5, 8-7, 8-11, 10-1, 10-2, 10-4 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 68.
<7>number of IO-APIC #8 registers: 16.
<7>number of IO-APIC #9 registers: 16.
<7>number of IO-APIC #10 registers: 16.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #8......
<7>.... register #00: 08000000
<7>....... : physical APIC id: 08
<7>....... : Delivery Type: 0
<7>....... : LTS : 0
<7>.... register #01: 000F0011
<7>....... : max redirection entries: 000F
<7>....... : PRQ implemented: 0
<7>....... : IO APIC version: 0011
<7>.... register #02: 08000000
<7>....... : arbitration: 08
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 0FF 0F 0 0 0 0 0 1 1 39
<7> 02 040 00 0 0 0 0 0 1 1 31
<7> 03 000 00 1 0 0 0 0 0 0 00
<7> 04 0FF 0F 0 0 0 0 0 1 1 41
<7> 05 000 00 1 0 0 0 0 0 0 00
<7> 06 0FF 0F 0 0 0 0 0 1 1 49
<7> 07 000 00 1 0 0 0 0 0 0 00
<7> 08 0FF 0F 0 0 0 0 0 1 1 51
<7> 09 0FF 0F 1 1 0 1 0 1 1 59
<7> 0a 0FF 0F 1 1 0 1 0 1 1 61
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 0FF 0F 0 0 0 0 0 1 1 69
<7> 0d 0FF 0F 1 1 0 1 0 1 1 71
<7> 0e 0FF 0F 0 0 0 0 0 1 1 79
<7> 0f 0FF 0F 0 0 0 0 0 1 1 81
<4>
<7>IO APIC #9......
<7>.... register #00: 09000000
<7>....... : physical APIC id: 09
<7>....... : Delivery Type: 0
<7>....... : LTS : 0
<7>.... register #01: 000F0011
<7>....... : max redirection entries: 000F
<7>....... : PRQ implemented: 0
<7>....... : IO APIC version: 0011
<7>.... register #02: 09000000
<7>....... : arbitration: 09
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 0FF 0F 1 1 0 1 0 1 1 89
<7> 01 0FF 0F 1 1 0 1 0 1 1 91
<7> 02 0FF 0F 1 1 0 1 0 1 1 99
<7> 03 0FF 0F 1 1 0 1 0 1 1 A1
<7> 04 0FF 0F 1 1 0 1 0 1 1 A9
<7> 05 0FF 0F 1 1 0 1 0 1 1 B1
<7> 06 0FF 0F 1 1 0 1 0 1 1 B9
<7> 07 0FF 0F 1 1 0 1 0 1 1 C1
<7> 08 0FF 0F 1 1 0 1 0 1 1 C9
<7> 09 0FF 0F 1 1 0 1 0 1 1 D1
<7> 0a 0FF 0F 1 1 0 1 0 1 1 D9
<7> 0b 0FF 0F 1 1 0 1 0 1 1 E1
<7> 0c 0FF 0F 1 1 0 1 0 1 1 E9
<7> 0d 0FF 0F 1 1 0 1 0 1 1 32
<7> 0e 0FF 0F 1 1 0 1 0 1 1 3A
<7> 0f 0FF 0F 1 1 0 1 0 1 1 42
<4>
<7>IO APIC #10......
<7>.... register #00: 0A000000
<7>....... : physical APIC id: 0A
<7>....... : Delivery Type: 0
<7>....... : LTS : 0
<7>.... register #01: 000F0011
<7>....... : max redirection entries: 000F
<7>....... : PRQ implemented: 0
<7>....... : IO APIC version: 0011
<7>.... register #02: 0A000000
<7>....... : arbitration: 0A
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 0FF 0F 1 1 0 1 0 1 1 4A
<7> 01 000 00 1 0 0 0 0 0 0 00
<7> 02 000 00 1 0 0 0 0 0 0 00
<7> 03 0FF 0F 1 1 0 1 0 1 1 52
<7> 04 000 00 1 0 0 0 0 0 0 00
<7> 05 0FF 0F 1 1 0 1 0 1 1 5A
<7> 06 0FF 0F 1 1 0 1 0 1 1 62
<7> 07 0FF 0F 1 1 0 1 0 1 1 6A
<7> 08 0FF 0F 1 1 0 1 0 1 1 72
<7> 09 0FF 0F 1 1 0 1 0 1 1 7A
<7> 0a 0FF 0F 1 1 0 1 0 1 1 82
<7> 0b 0FF 0F 1 1 0 1 0 1 1 8A
<7> 0c 0FF 0F 1 1 0 1 0 1 1 92
<7> 0d 0FF 0F 1 1 0 1 0 1 1 9A
<7> 0e 0FF 0F 1 1 0 1 0 1 1 A2
<7> 0f 0FF 0F 1 1 0 1 0 1 1 AA
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ4 -> 0:4
<7>IRQ6 -> 0:6
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ10 -> 0:10
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<7>IRQ16 -> 1:0
<7>IRQ17 -> 1:1
<7>IRQ18 -> 1:2
<7>IRQ19 -> 1:3
<7>IRQ20 -> 1:4
<7>IRQ21 -> 1:5
<7>IRQ22 -> 1:6
<7>IRQ23 -> 1:7
<7>IRQ24 -> 1:8
<7>IRQ25 -> 1:9
<7>IRQ26 -> 1:10
<7>IRQ27 -> 1:11
<7>IRQ28 -> 1:12
<7>IRQ29 -> 1:13
<7>IRQ30 -> 1:14
<7>IRQ31 -> 1:15
<7>IRQ32 -> 2:0
<7>IRQ35 -> 2:3
<7>IRQ37 -> 2:5
<7>IRQ38 -> 2:6
<7>IRQ39 -> 2:7
<7>IRQ40 -> 2:8
<7>IRQ41 -> 2:9
<7>IRQ42 -> 2:10
<7>IRQ43 -> 2:11
<7>IRQ44 -> 2:12
<7>IRQ45 -> 2:13
<7>IRQ46 -> 2:14
<7>IRQ47 -> 2:15
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1999.1451 MHz.
<4>..... host bus clock speed is 99.9571 MHz.
<4>cpu: 0, clocks: 999571, slice: 111063
<4>CPU0<T0:999568,T1:888496,D:9,S:111063,C:999571>
<4>cpu: 1, clocks: 999571, slice: 111063
<4>cpu: 2, clocks: 999571, slice: 111063
<4>cpu: 3, clocks: 999571, slice: 111063
<4>cpu: 6, clocks: 999571, slice: 111063
<4>cpu: 4, clocks: 999571, slice: 111063
<4>cpu: 7, clocks: 999571, slice: 111063
<4>cpu: 5, clocks: 999571, slice: 111063
<4>CPU2<T0:999568,T1:666368,D:11,S:111063,C:999571>
<4>CPU1<T0:999568,T1:777440,D:2,S:111063,C:999571>
<4>CPU3<T0:999568,T1:555312,D:4,S:111063,C:999571>
<4>CPU5<T0:999568,T1:333184,D:6,S:111063,C:999571>
<4>CPU4<T0:999568,T1:444240,D:13,S:111063,C:999571>
<4>CPU6<T0:999568,T1:222112,D:15,S:111063,C:999571>
<4>CPU7<T0:999568,T1:111056,D:8,S:111063,C:999571>
<4>migration_task 0 on cpu=0
<4>migration_task 1 on cpu=1
<4>migration_task 2 on cpu=2
<4>migration_task 3 on cpu=3
<4>migration_task 4 on cpu=4
<4>migration_task 5 on cpu=5
<4>migration_task 6 on cpu=6
<4>migration_task 7 on cpu=7
<6>PCI: PCI BIOS revision 2.10 entry at 0xf1135, last bus=22
<6>PCI: Using configuration type 1
<6>PCI: Probing PCI hardware
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
<6>PCI: Discovered primary peer bus 03 [IRQ]
<6>PCI: Discovered primary peer bus 07 [IRQ]
<6>PCI: Discovered primary peer bus 0b [IRQ]
<6>PCI: Discovered primary peer bus 0f [IRQ]
<6>PCI: Discovered primary peer bus 13 [IRQ]
<6>PCI->APIC IRQ transform: (B0,I12,P0) -> 37
<6>PCI->APIC IRQ transform: (B0,I13,P0) -> 41
<6>PCI->APIC IRQ transform: (B0,I14,P0) -> 40
<6>PCI->APIC IRQ transform: (B0,I15,P0) -> 10
<6>PCI->APIC IRQ transform: (B0,I16,P0) -> 39
<6>PCI->APIC IRQ transform: (B0,I16,P1) -> 32
<6>PCI->APIC IRQ transform: (B0,I16,P2) -> 38
<6>PCI->APIC IRQ transform: (B0,I30,P0) -> 35
<6>PCI->APIC IRQ transform: (B3,I2,P0) -> 43
<6>PCI->APIC IRQ transform: (B3,I30,P0) -> 35
<6>PCI->APIC IRQ transform: (B7,I30,P0) -> 35
<6>PCI->APIC IRQ transform: (B11,I30,P0) -> 35
<6>PCI->APIC IRQ transform: (B15,I30,P0) -> 35
<6>PCI->APIC IRQ transform: (B19,I30,P0) -> 35
<4>PCI: Device 00:78 not found by BIOS
<4>PCI: Device 00:7b not found by BIOS
<4>PCI: Device 00:b8 not found by BIOS
<4>PCI: Device 00:c0 not found by BIOS
<4>PCI: Device 00:c2 not found by BIOS
<4>PCI: Device 00:c4 not found by BIOS
<4>PCI: Device 00:c6 not found by BIOS
<4>PCI: Device 00:c8 not found by BIOS
<4>PCI: Device 00:ca not found by BIOS
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<4>allocated 32 pages and 32 bhs reserved for the highmem bounces
<6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a National Semiconductor PC87306
<6>loop: loaded (max 8 devices)
<6>HP CISS Driver (v 2.4.44)
<7>cciss: Device 0xb178 has been found at bus 0 dev 14 func 0
<6> blocks= 35553120 block_size= 512
<6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1)
<4>
<6> blocks= 35553120 block_size= 512
<6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1)
<4>
<4>blk: queue c03a8b60, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
<6>Partition check:
<6> cciss/c0d0: p1 p2 p3 p4 < p5 p6 >
<6> cciss/c0d1: p1
[...]
--------------------------------------------------------------------
The corresponding .config is:
--------------------------------------------------------------------
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_HAS_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_F00F_WORKS_OK=y
CONFIG_X86_MCE=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_HIGHIO=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_X86_CLUSTERED_APIC=y
# CONFIG_X86_NUMA is not set
# CONFIG_X86_TSC_DISABLE is not set
CONFIG_X86_TSC=y
CONFIG_HAVE_DEC_LOCK=y
#
# General setup
#
CONFIG_NET=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_IKCONFIG is not set
# CONFIG_PM is not set
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# ACPI Support
#
# CONFIG_ACPI is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_STATS is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_VLAN_8021Q is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_ADMA100 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_RZ1000=y
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_SVWKS=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input core support
#
# CONFIG_INPUT is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_HVC_CONSOLE is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
# CONFIG_MK712_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_AMD_RNG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_EXT3_FS=m
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_XFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_ZISOFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_PANIC_MORSE is not set
# CONFIG_DEBUG_SPINLOCK is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set
--------------------------------------------------------------------
-- Linux Solution Consultant Tél: +33 476 143 278 - Fax: +33 476 146 105 HP/Intel Solution Center http://hpintelco.net Hewlett-Packard Grenoble/France Des infos sur Linux? http://www.HyPer-Linux.org http://www.hp.com/linux La musique ancienne? http://www.musique-ancienne.org http://www.medieval.org - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/