Re: Testing IDE-TCQ and Taskfile - doesn't work nicely:)

Jan-Benedict Glaw (jbglaw@lug-owl.de)
Tue, 24 Jun 2003 00:19:53 +0200


This is a MIME-formatted message. If you see this text it means that your
E-mail software does not support MIME-formatted messages.

--=_courier-29164-1056407167-0001-2
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Mon, 2003-06-23 23:18:00 +0200, Bartlomiej Zolnierkiewicz <B.Zolnierkiew=
icz@elka.pw.edu.pl>
wrote in message <Pine.SOL.4.30.0306232315480.8078-200000@mion.elka.pw.edu.=
pl>:
> On Mon, 23 Jun 2003, Jan-Benedict Glaw wrote:

> > I've played a bit with my "mirror" machine
> >
> > - 200MHz Pentium-MMX
> > - 64MB RAM
> > - jbglaw@mirror:~$ cat /proc/ide/hd*/model
> > WDC AC2850F # System drive
> > IC35L040AVER07-0 # \
> > IC35L120AVV207-0 # > Storage (with DM/LVM)
> > Maxtor 4W100H6 # /
> > - jbglaw@mirror:~$ lspci |grep IDE
> > 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
> > - Linux v2.5.73
> > - <*> Intel PIIXn chipsets support
> >
> > Basically, if I enable Taskfile I/O, the box refuses to boot (basically,
> > the first drive sounds really broken like "clack clack clack" and no
> > data comes off the drive so there's no partition table, no root FS, but
> > a panic:) Is anybody interested in nailing this bug down?
>=20
> YES

What can I do about this one? I'll try to capture the lines... Taskfile
I/O seems to hit my drive(s) really hard:)

> > Disabling Taskfile lets me boot the box, but hdc doesn't like TCQ and
> > gives errors:
> >
> > ide_tcq_intr_timeout: timeout waiting for service interrupt
> > ide_tcq_intr_timeout: missing isr!
> > hdc: invalidating tag queue (0 commands)
> > hdc: drive_cmd: status=3D0x51 { DriveReady SeekComplete Error }
> > hdc: drive_cmd: error=3D0x04 { DriveStatusError }
> > [above messages repeat...]
>=20
> TCQ shouldn't be enabled on hdc, you have two drives on second ide
> channel and current TCQ driver design allows only one drive per channel,
> so proper fix is to not enable TCQ :-).
>=20
> Can you try attached patch?

I'll rebuild with your patch and give it a try (TCQ enabled, Taskfile
disabled...).

MfG, JBG

--=20
Jan-Benedict Glaw jbglaw@lug-owl.de . +49-172-7608481
"Eine Freie Meinung in einem Freien Kopf | Gegen Zensur | Gegen Krieg
fuer einen Freien Staat voll Freier B=FCrger" | im Internet! | im Ira=
k!
ret =3D do_actions((curr | FREE_SPEECH) & ~(IRAQ_WAR_2 | DRM | TCPA));

--=_courier-29164-1056407167-0001-2
Content-Type: application/pgp-signature
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)

iD8DBQE+930IHb1edYOZ4bsRAuSxAJ9zO+hGYDhsAKKeb4d/PnO8dfaKGwCeOtPL
2P60DmCwH96RsZFPpLw9GHM=
=+rtE
-----END PGP SIGNATURE-----

--=_courier-29164-1056407167-0001-2--