new 2.5.72 breaks aumix

Gerardo Arnaez (garnaez@yahoo.com)
Sat, 21 Jun 2003 17:39:57 -0700 (PDT)

[1.] kernel 2.5.72 breaks aumix
[2.]I have been using 2.5.69-ac1 on a HP pavilion
ze5285us laptop. i
maintain a how-to on installing debian on it. I have
upgraded to the
2.5.72 kernel. Now aumix will not longer work
[3.] aumix kernel sound
[4.]Linux version 2.5.72 (root@brick) (gcc version
2.95.4 20011002
(Debian prerelease)) #1 Sat Jun 21 16:41:33 PDT 2003
[5.]N/A
[6.]
dude@brick:~$ aumix
aumix: error opening mixer
[7.]
[7.1]
Linux brick 2.5.72 #1 Sat Jun 21 16:41:33 PDT 2003
i686 unknown

Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
module-init-tools 2.4.15
e2fsprogs 1.27
pcmcia-cs 3.1.33
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded

[7.2]
brick:/usr/src/linux/scripts# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.66GHz
stepping : 7
cpu MHz : 2659.333
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8
sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss
ht tm pbe cid
bogomips : 5210.11
[7.3]
brick:/usr/src/linux/scripts# cat /proc/modules
brick:/usr/src/linux/scripts#
[7.4]
brick:/usr/src/linux/scripts# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1000-10ff : ALi Corporation M5451 PCI AC-Link Co
1000-10ff : ALI 5451
1400-14ff : ALi Corporation M5457 AC-Link Modem
2000-201f : VIA Technologies, In USB
2000-201f : uhci-hcd
2020-203f : VIA Technologies, In USB (#2)
2020-203f : uhci-hcd
2040-204f : ALi Corporation M5229 IDE
2040-2047 : ide0
2048-204f : ide1
2400-24ff : National Semiconduct DP83815 (MacPhyter)
2400-24ff : eth0
8000-803f : ALi Corporation M7101 PMU
8040-805f : ALi Corporation M7101 PMU
9000-9fff : PCI Bus #01
9000-90ff : PCI device 1002:4337 (ATI Technologies
Inc)

brick:/# cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000cf000-000cf7ff : Extension ROM
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-1bf6ffff : System RAM
00100000-002ab15a : Kernel code
002ab15b-0036137f : Kernel data
1bf70000-1bf7bfff : ACPI Tables
1bf7c000-1bf7ffff : ACPI Non-volatile Storage
1bf80000-1bffffff : reserved
2bf80000-2bffffff : reserved
d0000000-d0000fff : ALi Corporation M5451 PCI AC-Link
Co
d0001000-d0001fff : ALi Corporation M5457 AC-Link
Modem
d0002000-d0002fff : O2 Micro, Inc. OZ6912 Cardbus
Contr
d0003000-d00030ff : VIA Technologies, In USB 2.0
d0003000-d00030ff : ehci-hcd
d0003800-d0003fff : Texas Instruments TSB43AB21
IEEE-1394a
d0004000-d0007fff : Texas Instruments TSB43AB21
IEEE-1394a
d0008000-d0008fff : National Semiconduct DP83815
(MacPhyter)
d0008000-d0008fff : eth0
d0009000-d0009fff : PCI device 1002:cbb2 (ATI
Technologies Inc)
d000a000-d000afff : Harris Semiconductor Prism 2.5
Wavelan ch
d0300000-d03fffff : PCI Bus #01
d0300000-d030ffff : PCI device 1002:4337 (ATI
Technologies Inc)
d4000000-d7ffffff : PCI device 1002:cbb2 (ATI
Technologies Inc)
d8000000-dfffffff : PCI Bus #01
d8000000-dfffffff : PCI device 1002:4337 (ATI
Technologies Inc)
d8000000-dbfeffff : vesafb
fff80000-ffffffff : reserved
[7.5]

00:00.0 Host bridge: ATI Technologies Inc: Unknown
device cbb2 (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at d4000000 (32-bit, prefetchable)
[size=64M]
Region 1: Memory at d0009000 (32-bit, prefetchable)
[size=4K]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh-
GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>

00:01.0 PCI bridge: ATI Technologies Inc: Unknown
device 7010 (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01,
sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d0300000-d03fffff
Prefetchable memory behind bridge: d8000000-dfffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset-
FastB2B-

00:06.0 Multimedia audio controller: ALi Corporation
M5451 PCI AC-Link
Controller Audio Device (rev 02)
Subsystem: Hewlett-Packard Company: Unknown device
0850
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR+ <PERR+
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at d0000000 (32-bit,
non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA
Bridge [Aladdin
IV]
Subsystem: ALi Corporation ALI M1533 Aladdin IV ISA
Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 Modem: ALi Corporation Intel 537 [M5457
AC-Link Modem] (prog-if
00 [Generic])
Subsystem: Hewlett-Packard Company: Unknown device
0850
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at d0001000 (32-bit,
non-prefetchable) [disabled]
[size=4K]
Region 1: I/O ports at 1400 [disabled] [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 Network controller: Harris Semiconductor Prism
2.5 Wavelan
chipset (rev 01)
Subsystem: AMBIT Microsystem Corp.: Unknown device
0200
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d000a000 (32-bit, prefetchable)
[size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus
Controller
Subsystem: Hewlett-Packard Company: Unknown device
0850
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0002000 (32-bit,
non-prefetchable) [disabled]
[size=4K]
Bus: primary=00, secondary=02, subordinate=05,
sec-latency=176
Memory window 0: d0200000-d02ff000 [disabled]
Memory window 1: d0100000-d01ff000 [disabled]
I/O window 0: 00001c00-00001cff [disabled]
I/O window 1: 00001800-000018ff [disabled]
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset-
16bInt+ PostWrite-
16-bit legacy interface ports at 0001

00:0b.0 USB Controller: VIA Technologies, Inc. USB
(rev 50) (prog-if 00
[UHCI])
Subsystem: Hewlett-Packard Company: Unknown device
0850
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 2000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.1 USB Controller: VIA Technologies, Inc. USB
(rev 50) (prog-if 00
[UHCI])
Subsystem: Hewlett-Packard Company: Unknown device
0850
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 2020 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0
(rev 51)
(prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company: Unknown device
0850
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 20
Interrupt: pin C routed to IRQ 10
Region 0: Memory at d0003000 (32-bit,
non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 FireWire (IEEE 1394): Texas Instruments
TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10
[OHCI])
Subsystem: Hewlett-Packard Company: Unknown device
0850
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0003800 (32-bit,
non-prefetchable) [disabled]
[size=2K]
Region 1: Memory at d0004000 (32-bit,
non-prefetchable) [disabled]
[size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 IDE interface: ALi Corporation M5229 IDE (rev
c4) (prog-if fa)
Subsystem: Hewlett-Packard Company: Unknown device
0850
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 2040 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 Bridge: ALi Corporation M7101 PMU
Subsystem: Hewlett-Packard Company: Unknown device
0850
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:12.0 Ethernet controller: National Semiconductor
Corporation DP83815
(MacPhyter) Ethernet Controller
Subsystem: Hewlett-Packard Company: Unknown device
0850
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 90 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 2400 [size=256]
Region 1: Memory at d0008000 (32-bit,
non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=320mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:05.0 VGA compatible controller: ATI Technologies
Inc Radeon IGP 340M
(prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company: Unknown device
0850
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping+ SERR- FastB2B+
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at d8000000 (32-bit, prefetchable)
[size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d0300000 (32-bit,
non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh-
GART64- HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit-
FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

[7.6]
brick:/home/dude# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QSI Model: CDRW/DVD SBW-241 Rev: VX08
Type: CD-ROM ANSI SCSI
revision: 02

[7.7] Dont know
[X.] None have worked

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/