This patch adds a dependency on an undefined BROKEN to all drivers that
have longstanding compile errors.
Additionally I'll add a
config BROKEN_ON_SMP
default y if !SMP
and add BROKEN_ON_SMP to the dependencies of drivers that don't compile
with SMP enabled (e.g. because of cli/sti usage). I was too lazy to
search for the BROKEN_ON_SMP drivers in 2.5.72 but the idea should be
clear.
diffstat output of the patch below:
char/Kconfig | 12 ++++++------
isdn/Kconfig | 1 +
media/video/Kconfig | 4 ++--
mtd/devices/Kconfig | 2 +-
net/Kconfig | 4 ++--
net/wan/Kconfig | 2 +-
scsi/Kconfig | 16 ++++++++--------
video/Kconfig | 6 +++---
8 files changed, 24 insertions(+), 23 deletions(-)
cu
Adrian
--- linux-2.5.72/drivers/net/wan/Kconfig.old 2003-06-18 23:09:14.000000000 +0200
+++ linux-2.5.72/drivers/net/wan/Kconfig 2003-06-18 23:10:11.000000000 +0200
@@ -506,7 +506,7 @@
config VENDOR_SANGOMA
tristate "Sangoma WANPIPE(tm) multiprotocol cards"
- depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA)
+ depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA) && BROKEN
---help---
WANPIPE from Sangoma Technologies Inc. (<http://www.sangoma.com/>)
is a family of intelligent multiprotocol WAN adapters with data
--- linux-2.5.72/drivers/net/Kconfig.old 2003-06-18 23:03:07.000000000 +0200
+++ linux-2.5.72/drivers/net/Kconfig 2003-06-18 23:20:36.000000000 +0200
@@ -2139,7 +2139,7 @@
config DEFXX
tristate "Digital DEFEA and DEFPA adapter support"
- depends on FDDI && (PCI || EISA)
+ depends on FDDI && (PCI || EISA) && BROKEN
help
This is support for the DIGITAL series of EISA (DEFEA) and PCI
(DEFPA) controllers which can connect you to a local FDDI network.
@@ -2482,7 +2482,7 @@
config IPHASE5526
tristate "Interphase 5526 Tachyon chipset based adapter support"
- depends on NET_FC && SCSI && PCI
+ depends on NET_FC && SCSI && PCI && BROKEN
help
Say Y here if you have a Fibre Channel adaptor of this kind.
--- linux-2.5.72/drivers/video/Kconfig.old 2003-06-18 23:50:05.000000000 +0200
+++ linux-2.5.72/drivers/video/Kconfig 2003-06-19 00:06:08.000000000 +0200
@@ -40,7 +40,7 @@
config FB_CIRRUS
tristate "Cirrus Logic support"
- depends on FB && (AMIGA || PCI)
+ depends on FB && (AMIGA || PCI) && BROKEN
---help---
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
@@ -55,7 +55,7 @@
config FB_PM2
tristate "Permedia2 support"
- depends on FB && (AMIGA || PCI)
+ depends on FB && (AMIGA || PCI) && BROKEN
help
This is the frame buffer device driver for the Permedia2 AGP frame
buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
@@ -802,7 +802,7 @@
config FB_PM3
tristate "Permedia3 support"
- depends on FB && PCI
+ depends on FB && PCI && BROKEN
help
This is the frame buffer device driver for the 3DLabs Permedia3
chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
--- linux-2.5.72/drivers/isdn/Kconfig.old 2003-06-18 22:28:04.000000000 +0200
+++ linux-2.5.72/drivers/isdn/Kconfig 2003-06-18 22:29:09.000000000 +0200
@@ -26,6 +26,7 @@
config ISDN
tristate "Old ISDN4Linux (obsolete)"
+ depends on BROKEN
---help---
This driver allows you to use an ISDN-card for networking
connections and as dialin/out device. The isdn-tty's have a built
--- linux-2.5.72/drivers/media/video/Kconfig.old 2003-06-18 22:32:56.000000000 +0200
+++ linux-2.5.72/drivers/media/video/Kconfig 2003-06-18 22:36:54.000000000 +0200
@@ -161,7 +161,7 @@
config VIDEO_ZORAN
tristate "Zoran ZR36057/36060 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C
+ depends on VIDEO_DEV && PCI && I2C && BROKEN
help
Say Y here to include support for video cards based on the Zoran
ZR36057/36060 encoder/decoder chip (including the Iomega Buz and the
@@ -190,7 +190,7 @@
config VIDEO_ZR36120
tristate "Zoran ZR36120/36125 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C
+ depends on VIDEO_DEV && PCI && I2C && BROKEN
help
Support for ZR36120/ZR36125 based frame grabber/overlay boards.
This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
--- linux-2.5.72/drivers/char/Kconfig.old 2003-06-18 21:44:21.000000000 +0200
+++ linux-2.5.72/drivers/char/Kconfig 2003-06-19 01:40:16.000000000 +0200
@@ -162,7 +162,7 @@
config DIGI
tristate "Digiboard PC/Xx Support"
- depends on SERIAL_NONSTANDARD && DIGIEPCA=n
+ depends on SERIAL_NONSTANDARD && DIGIEPCA=n && BROKEN
help
This is a driver for the Digiboard PC/Xe, PC/Xi, and PC/Xeve cards
that give you many serial ports. You would need something like this
@@ -175,7 +175,7 @@
config ESPSERIAL
tristate "Hayes ESP serial port support"
- depends on SERIAL_NONSTANDARD && ISA
+ depends on SERIAL_NONSTANDARD && ISA && BROKEN
help
This is a driver which supports Hayes ESP serial ports. Both single
port cards and multiport cards are supported. Make sure to read
@@ -260,7 +260,7 @@
config RISCOM8
tristate "SDL RISCom/8 card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN
help
This is a driver for the SDL Communications RISCom/8 multiport card,
which gives you many serial ports. You would need something like
@@ -273,7 +273,7 @@
config SPECIALIX
tristate "Specialix IO8+ card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN
help
This is a driver for the Specialix IO8+ multiport card (both the
ISA and the PCI version) which gives you many serial ports. You
@@ -337,7 +337,7 @@
config STALLION
tristate "Stallion EasyIO or EC8/32 support"
- depends on STALDRV
+ depends on STALDRV && BROKEN
help
If you have an EasyIO or EasyConnection 8/32 multiport Stallion
card, then this is for you; say Y. Make sure to read
@@ -350,7 +350,7 @@
config ISTALLION
tristate "Stallion EC8/64, ONboard, Brumby support"
- depends on STALDRV
+ depends on STALDRV && BROKEN
help
If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
serial multiport card, say Y here. Make sure to read
--- linux-2.5.72/drivers/scsi/Kconfig.old 2003-06-18 20:40:21.000000000 +0200
+++ linux-2.5.72/drivers/scsi/Kconfig 2003-06-18 23:38:33.000000000 +0200
@@ -329,7 +329,7 @@
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !X86_64 && SCSI
+ depends on !X86_64 && SCSI && BROKEN
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
@@ -372,7 +372,7 @@
# does not use pci dma and seems to be isa/onboard only for old machines
config SCSI_AM53C974
tristate "AM53/79C974 PCI SCSI support"
- depends on !X86_64 && SCSI && PCI
+ depends on !X86_64 && SCSI && PCI && BROKEN
---help---
This is support for the AM53/79C974 SCSI host adapters. Please read
<file:Documentation/scsi/AM53C974.txt> for details. Also, the
@@ -429,7 +429,7 @@
config SCSI_CPQFCTS
tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
help
Say Y here to compile in support for the Compaq StorageWorks Fibre
Channel 64-bit/66Mhz Host Bus Adapter.
@@ -715,7 +715,7 @@
config SCSI_INITIO
tristate "Initio 9100U(W) support"
- depends on SCSI && PCI
+ depends on SCSI && PCI && BROKEN
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
read the SCSI-HOWTO, available from
@@ -728,7 +728,7 @@
config SCSI_INIA100
tristate "Initio INI-A100U2W support"
- depends on SCSI && PCI
+ depends on SCSI && PCI && BROKEN
help
This is support for the Initio INI-A100U2W SCSI host adapter.
Please read the SCSI-HOWTO, available from
@@ -1231,7 +1231,7 @@
config SCSI_PCI2000
tristate "PCI2000 support"
- depends on SCSI
+ depends on SCSI && BROKEN
help
This is support for the PCI2000I EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1244,7 +1244,7 @@
config SCSI_PCI2220I
tristate "PCI2220i support"
- depends on SCSI
+ depends on SCSI && BROKEN
help
This is support for the PCI2220i EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1409,7 +1409,7 @@
config SCSI_DC390T
tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
---help---
This driver supports PCI SCSI host adapters based on the Am53C974A
chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
--- linux-2.5.72/drivers/mtd/devices/Kconfig.old 2003-06-18 22:38:39.000000000 +0200
+++ linux-2.5.72/drivers/mtd/devices/Kconfig 2003-06-18 22:39:08.000000000 +0200
@@ -102,7 +102,7 @@
config MTD_BLKMTD
tristate "MTD emulation using block device"
- depends on MTD
+ depends on MTD && BROKEN
help
This driver allows a block device to appear as an MTD. It would
generally be used in the following cases:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/