PROBLEM: fatal error with nForce2 system

Morten Kjeldgaard (mortenkjeldgaard@stofanet.dk)
Thu, 12 Jun 2003 20:19:41 +0200


Hi kernel-people,

I built my computer on an ASUS A7N8X GD/Deluxe mother board. I have
RedHat
Linux 9.0 installed, and I installed the nForce2 drivers
NVIDIA_kernel-1.0-4191.

The machine seems to be quite stable, but I have had a bunch of
mysterious crashes
that I finally tracked to a script run every night that calls bzip2. I
have since experimented with bzip2, and I have found that I can
occasionally make the machine crash, but it is not really reproducible.
I
noticed some dumps in the system log that I am attaching to this
message.

Bzip2 is not the only application that can crash the machine, I have had
problems with the konqueror browser and CNS which is a number crunching
program for crystallography.

I first reported the problem to nVidia, and they were very quick to
repond. I was in contact with a very helpful engineer, and after some
experimentation we concluded that the problem is probably not in their
drivers, since the machine crashes under the same circumstances without
the nvidia drivers loaded. However, I have only seen error messages in
the syslog when the nvidia driver is loaded, but that is most likely a
coincidence. Sometimes the machine freezes instantly, other times it
goes down in a less spectacular manner...

I therefore report the problem to the kernel. I am including the
relevant messages from the syslog, plus a number of the stuff mentioned
in the reporting_bugs guide.

Cheers,
Morten

-- 
Morten Kjeldgaard <mok@imsb.au.dk>
Department of Molecular Biology, Aarhus University
Gustav Wieds Vej 10 C, DK-8000 Aarhus C, Denmark.
Lab +45 89425026 * Mobile +45 89428063 * Fax +45 86123178
Home +45 86188180 * ICQ 27224900 * http://imsb.au.dk/~mok

-------- snips from /var/log/messages

May 26 00:33:00 ghost automount[858]: attempting to mount entry /u/mok May 26 00:35:39 ghost kernel: Page has mapping still set. This is a serious situation. However if you May 26 00:35:39 ghost kernel: are using the NVidia binary only module please report this bug to May 26 00:35:39 ghost kernel: NVidia and not to the linux kernel mailinglist. May 26 00:35:39 ghost kernel: ------------[ cut here ]------------ May 26 00:35:39 ghost kernel: kernel BUG at page_alloc.c:122! May 26 00:35:39 ghost kernel: invalid operand: 0000 May 26 00:35:39 ghost kernel: i810_audio ac97_codec soundcore nfs nvidia eeprom i2c-proc i2c-core binfmt_misc nfsd lockd sunrpc autofs 3c59x ohci1394 ieee1394 st loop lvm-mod keybdev mouse May 26 00:35:39 ghost kernel: CPU: 0 May 26 00:35:39 ghost kernel: EIP: 0060:[<c013b7c3>] Tainted: P May 26 00:35:39 ghost kernel: EFLAGS: 00010282 May 26 00:35:39 ghost kernel: May 26 00:35:39 ghost kernel: EIP is at __free_pages_ok [kernel] 0x323 (2.4.20-8) May 26 00:35:39 ghost kernel: eax: 00000033 ebx: c10cdad8 ecx: f6fd2000 edx: f6fd3f7c May 26 00:35:39 ghost kernel: esi: d3c25e28 edi: 00000000 ebp: 00000000 esp: ce3c7eb4 May 26 00:35:39 ghost kernel: ds: 0068 es: 0068 ss: 0068 May 26 00:35:39 ghost kernel: Process bzip2 (pid: 28951, stackpage=ce3c7000) May 26 00:35:39 ghost kernel: Stack: c0256940 00000002 c0303b84 c15ef538 c0303900 c1038030 c0303b0c d3c25e28 May 26 00:35:39 ghost kernel: c897dfcc 000c2000 c10cdad8 c897dfcc 000c2000 03ac3067 c012c6c8 c10cdad8 May 26 00:35:39 ghost kernel: 000b5000 c012eab7 d48d1a40 400b5000 c897dfcc c011694c 000000b6 40400000 May 26 00:35:39 ghost kernel: Call Trace: [<c012c6c8>] __free_pte [kernel] 0x4c (0xce3c7eec)) May 26 00:35:39 ghost kernel: [<c012eab7>] zap_pte_range [kernel] 0x12f (0xce3c7ef8)) May 26 00:35:39 ghost kernel: [<c011694c>] do_page_fault [kernel] 0x178 (0xce3c7f08)) May 26 00:35:39 ghost kernel: [<c012cd1b>] zap_page_range [kernel] 0xc7 (0xce3c7f20)) May 26 00:35:39 ghost kernel: [<c012ffcf>] exit_mmap [kernel] 0xb3 (0xce3c7f60)) May 26 00:35:39 ghost kernel: [<c01196bb>] mmput [kernel] 0x47 (0xce3c7f84)) May 26 00:35:39 ghost kernel: [<c011e991>] do_exit [kernel] 0xf1 (0xce3c7f94)) May 26 00:35:39 ghost kernel: [<c011ec08>] do_group_exit [kernel] 0x50 (0xce3c7fb0)) May 26 00:35:39 ghost kernel: [<c01093b3>] system_call [kernel] 0x33 (0xce3c7fc0)) May 26 00:35:39 ghost kernel: May 26 00:35:39 ghost kernel: May 26 00:35:40 ghost kernel: Code: 0f 0b 7a 00 9b 61 25 c0 e9 1b fd ff ff 0f 0b 69 00 9b 61 25 May 26 00:41:59 ghost automount[29609]: expired /u/mok

May 28 00:33:00 ghost automount[857]: attempting to mount entry /u/mok May 28 00:35:30 ghost kernel: swap_dup: Bad swap file entry 0006fb04 May 28 00:35:30 ghost kernel: VM: killing process bzip2 May 28 00:35:30 ghost kernel: swap_free: Bad swap file entry 0006fb04 May 28 00:35:30 ghost kernel: ------------[ cut here ]------------ May 28 00:35:30 ghost kernel: kernel BUG at page_alloc.c:139! May 28 00:35:30 ghost kernel: invalid operand: 0000 May 28 00:35:30 ghost kernel: i810_audio ac97_codec soundcore nfs nvidia eeprom i2c-proc i2c-core binfmt_misc nfsd lockd sunrpc autofs 3c59x ohci1394 ieee1394 st loop lvm-mod keybdev mouse May 28 00:35:30 ghost kernel: CPU: 0 May 28 00:35:30 ghost kernel: EIP: 0060:[<c013b57d>] Tainted: P May 28 00:35:30 ghost kernel: EFLAGS: 00010206 May 28 00:35:30 ghost kernel: May 28 00:35:30 ghost kernel: EIP is at __free_pages_ok [kernel] 0xdd (2.4.20-8) May 28 00:35:30 ghost kernel: eax: 01000050 ebx: c18846a8 ecx: c1000030 edx: 1857e044 May 28 00:35:30 ghost kernel: esi: 00000000 edi: 00000000 ebp: 00000000 esp: eb695e0c May 28 00:35:30 ghost kernel: ds: 0068 es: 0068 ss: 0068 May 28 00:35:30 ghost kernel: Process bzip2 (pid: 32142, stackpage=eb695000) May 28 00:35:30 ghost kernel: Stack: c0303640 00000002 c0303b84 0006fb04 c0303900 c1038030 c0303b0c d857e064 May 28 00:35:30 ghost kernel: d857e064 0003e000 c18846a8 d857e064 0003e000 26ef9067 c012c6c8 c18846a8 May 28 00:35:30 ghost kernel: 00019000 c012eab7 f6215640 40419000 d857e064 00000006 00000019 40800000 May 28 00:35:30 ghost kernel: Call Trace: [<c012c6c8>] __free_pte [kernel] 0x4c (0xeb695e44)) May 28 00:35:30 ghost kernel: [<c012eab7>] zap_pte_range [kernel] 0x12f (0xeb695e50)) May 28 00:35:30 ghost kernel: [<c012cd1b>] zap_page_range [kernel] 0xc7 (0xeb695e78)) May 28 00:35:30 ghost kernel: [<c012ffcf>] exit_mmap [kernel] 0xb3 (0xeb695eb8)) May 28 00:35:30 ghost kernel: [<c01196bb>] mmput [kernel] 0x47 (0xeb695edc)) May 28 00:35:30 ghost kernel: [<c011e991>] do_exit [kernel] 0xf1 (0xeb695eec)) May 28 00:35:30 ghost kernel: [<c0116cdd>] .text.lock.fault [kernel] 0x0 (0xeb695f08)) May 28 00:35:30 ghost kernel: [<f8b30200>] nv_linux_devices [nvidia] 0x0 (0xeb695f1c)) May 28 00:35:30 ghost kernel: [<f89cf71b>] __nvsym00654 [nvidia] 0x83 (0xeb695f28)) May 28 00:35:30 ghost kernel: [<f89cf65d>] __nvsym00728 [nvidia] 0x31 (0xeb695f3c)) May 28 00:35:30 ghost kernel: [<f89d02c0>] rm_isr [nvidia] 0x10 (0xeb695f50)) May 28 00:35:30 ghost kernel: [<f89b8aab>] nv_kern_isr [nvidia] 0x25 (0xeb695f60)) May 28 00:35:30 ghost kernel: [<c010a7e5>] handle_IRQ_event [kernel] 0x4d (0xeb695f80)) May 28 00:35:30 ghost kernel: [<f8b30200>] nv_linux_devices [nvidia] 0x0 (0xeb695f88)) May 28 00:35:30 ghost kernel: [<c010a992>] do_IRQ [kernel] 0x96 (0xeb695fa0)) May 28 00:35:30 ghost kernel: [<c01167d4>] do_page_fault [kernel] 0x0 (0xeb695fb0)) May 28 00:35:30 ghost kernel: [<c01094a4>] error_code [kernel] 0x34 (0xeb695fb8)) May 28 00:35:30 ghost kernel: May 28 00:35:30 ghost kernel: May 28 00:35:30 ghost kernel: Code: 0f 0b 8b 00 9b 61 25 c0 8b 43 18 89 f9 89 de 83 e0 eb 89 43 May 28 16:42:54 ghost syslogd 1.4.1: restart. ------------------------------ sh /usr/src/linux-2.4.20-8/scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.

Linux ghost.imsb.au.dk 2.4.20-8 #1 Thu Mar 13 17:18:24 EST 2003 i686 athlon i386 GNU/Linux

Gnu C 3.2.2 Gnu make 3.79.1 util-linux 2.11y mount 2.11y modutils 2.4.22 e2fsprogs 1.32 reiserfsprogs 3.6.4 PPP 2.4.1 isdn4k-utils 3.1pre4 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 2.0.11 Net-tools 1.60 Kbd 1.08 Sh-utils 4.5.3 Modules Loaded i810_audio ac97_codec soundcore nfs nvidia eeprom i2c-proc i2c-core binfmt_misc nfsd lockd sunrpc autofs 3c59x ohci1394 ieee1394 st loop lvm-mod keybdev mousedev hid input ehci-hcd usb-ohci usbcore ext3 jbd aic7xxx sd_mod scsi_mod ------------------------------ cat /proc/version Linux version 2.4.20-8 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 ------------------------------ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 8 model name : AMD Athlon(tm) XP 2600+ stepping : 1 cpu MHz : 2079.551 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 4141.87 ---------- cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 c000-cfff : PCI Bus #01 c000-c0ff : Adaptec AIC-7892A U160/m d000-dfff : PCI Bus #02 d000-d07f : PCI device 10b7:9201 (3Com Corporation) d000-d07f : 02:01.0 e000-e07f : PCI device 10de:006a (nVidia Corporation) e000-e03f : NVIDIA nForce Audio e400-e41f : PCI device 10de:0064 (nVidia Corporation) e800-e8ff : PCI device 10de:006a (nVidia Corporation) e800-e8ff : NVIDIA nForce Audio f000-f00f : PCI device 10de:0065 (nVidia Corporation) f000-f007 : ide0 f008-f00f : ide1 ----------- cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 c000-cfff : PCI Bus #01 c000-c0ff : Adaptec AIC-7892A U160/m d000-dfff : PCI Bus #02 d000-d07f : PCI device 10b7:9201 (3Com Corporation) d000-d07f : 02:01.0 e000-e07f : PCI device 10de:006a (nVidia Corporation) e000-e03f : NVIDIA nForce Audio e400-e41f : PCI device 10de:0064 (nVidia Corporation) e800-e8ff : PCI device 10de:006a (nVidia Corporation) e800-e8ff : NVIDIA nForce Audio f000-f00f : PCI device 10de:0065 (nVidia Corporation) f000-f007 : ide0 f008-f00f : ide1 [mok@ghost mok]$ cat /proc/iomem 00000000-0009f7ff : System RAM 0009f800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000cc000-000cc7ff : Extension ROM 000f0000-000fffff : System ROM 00100000-3ffeffff : System RAM 00100000-002481d3 : Kernel code 002481d4-003412c3 : Kernel data 3fff0000-3fff2fff : ACPI Non-volatile Storage 3fff3000-3fffffff : ACPI Tables c0000000-c7ffffff : PCI device 10de:01e0 (nVidia Corporation) c8000000-d7ffffff : PCI Bus #03 c8000000-cfffffff : nVidia Corporation NV20 [GeForce3 Ti200] d0000000-d007ffff : nVidia Corporation NV20 [GeForce3 Ti200] d8000000-dfffffff : PCI Bus #03 d8000000-d8ffffff : nVidia Corporation NV20 [GeForce3 Ti200] e0000000-e1ffffff : PCI Bus #01 e1000000-e1000fff : Adaptec AIC-7892A U160/m e1000000-e1000fff : aic7xxx e2000000-e3ffffff : PCI Bus #02 e3000000-e300007f : PCI device 10b7:9201 (3Com Corporation) e4000000-e407ffff : PCI device 10de:006b (nVidia Corporation) e4080000-e4080fff : PCI device 10de:0067 (nVidia Corporation) e4080000-e4080fff : usb-ohci e4081000-e40810ff : PCI device 10de:0068 (nVidia Corporation) e4081000-e40810ff : ehci-hcd e4082000-e40827ff : PCI device 10de:006e (nVidia Corporation) e4082000-e40827ff : ohci1394 e4083000-e408303f : PCI device 10de:006e (nVidia Corporation) e4084000-e4084fff : PCI device 10de:0067 (nVidia Corporation) e4084000-e4084fff : usb-ohci e4085000-e4085fff : PCI device 10de:006a (nVidia Corporation) fec00000-fec00fff : reserved fee00000-fee00fff : reserved ffff0000-ffffffff : reserved -------------- sudo /sbin/lspci -vvv 00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev a2) Subsystem: Asustek Computer, Inc.: Unknown device 80ac Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M] Capabilities: [40] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4 Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x4 Capabilities: [60] #08 [2001]

00:00.1 RAM memory: nVidia Corporation: Unknown device 01eb (rev a2) Subsystem: nVidia Corporation: Unknown device 0c17 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.2 RAM memory: nVidia Corporation: Unknown device 01ee (rev a2) Subsystem: nVidia Corporation: Unknown device 0c17 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.3 RAM memory: nVidia Corporation: Unknown device 01ed (rev a2) Subsystem: nVidia Corporation: Unknown device 0c17 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.4 RAM memory: nVidia Corporation: Unknown device 01ec (rev a2) Subsystem: nVidia Corporation: Unknown device 0c17 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.5 RAM memory: nVidia Corporation: Unknown device 01ef (rev a2) Subsystem: nVidia Corporation: Unknown device 0c17 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3) Subsystem: Asustek Computer, Inc. A7N8X Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [48] #08 [01e1]

00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) Subsystem: Asustek Computer, Inc.: Unknown device 0c11 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 3 Region 0: I/O ports at e400 [size=32] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc. A7N8X Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at e4084000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc. A7N8X Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 7 Region 0: Memory at e4080000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: Asustek Computer, Inc. A7N8X Mainboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 5 Region 0: Memory at e4081000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] #0a [2080] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2) Subsystem: Asustek Computer, Inc.: Unknown device 0c11 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (250ns min, 3000ns max) Interrupt: pin A routed to IRQ 7 Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=512K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) Subsystem: Asustek Computer, Inc.: Unknown device 8095 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 3 Region 0: I/O ports at e800 [size=256] Region 1: I/O ports at e000 [size=128] Region 2: Memory at e4085000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 PCI bridge: nVidia Corporation: Unknown device 006c (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: e0000000-e1ffffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Asustek Computer, Inc.: Unknown device 0c11 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 4: I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 PCI bridge: nVidia Corporation: Unknown device 006d (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: e2000000-e3ffffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 809a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e4082000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at e4083000 (32-bit, non-prefetchable) [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: d8000000-dfffffff Prefetchable memory behind bridge: c8000000-d7ffffff BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

01:07.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02) Subsystem: Adaptec 29160N Ultra160 SCSI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (10000ns min, 6250ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 BIST result: 00 Region 0: I/O ports at c000 [disabled] [size=256] Region 1: Memory at e1000000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller (rev 40) Subsystem: Asustek Computer, Inc.: Unknown device 80ab Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at d000 [size=128] Region 1: Memory at e3000000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:00.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti 200] (rev a3) (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c8000000 (32-bit, prefetchable) [size=128M] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=512K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2,x4 Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x4 ------------------------- cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 04 Lun: 00 Vendor: iomega Model: jaz 1GB Rev: J.83 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: Quantum Model: DLT4000 Rev: CF5F Type: Sequential-Access ANSI SCSI revision: 02 -------------------

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/