> Hi i will look into that with the bridges, i hope that Hercules is so that
> they give me the specīs (Plan of the Card) with the Jupers/Bridges for AGP
> 2.0.
Follow the traces from pins A3 and A11 on the edge connector, they'll lead
you to the 0 ohm resistor jumpers (Just look for the little rectangular
things that have a 0 printed on them where others have numbers).
Make sure they are the ones for A3 and A11, and remove 'em. Voila, an AGP
2.0 card.
(These are on the ATI 9700 reference design, which all manufacturers have
copied so far, your Hercules will probably have them too, although it's
a 9800 I'm assuming)
> Itīs very SAD that Ati and Nvidia will not give the Specs or an Sourcecode
> of the Drivers :/.
Agreed. :-(
-----
James Sellman -- ISU CoE-CS/ISLUG Linux Lab Admin |"Lum, did you just see
----------------------------------------------------| a hentai rabbit flying
skuld@inconnu.isu.edu | // A4000/604e/60 128M| through the air?"
skuld@anime.net | \X/ A500/20 3M | - Miyake Shinobu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/