Jun 10 01:09:07 oops kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jun 10 01:09:07 oops kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jun 10 01:09:07 oops kernel: VP_IDE: IDE controller at PCI slot 00:11.1
Jun 10 01:09:07 oops kernel: PCI: Hardcoded IRQ 14 for device 00:11.1
Jun 10 01:09:07 oops kernel: VP_IDE: chipset revision 6
Jun 10 01:09:07 oops kernel: VP_IDE: not 100%% native mode: will probe irqs later
Jun 10 01:09:07 oops kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jun 10 01:09:07 oops kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller
on pci00:11.1
Jun 10 01:09:07 oops kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Jun 10 01:09:07 oops kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
Jun 10 01:09:07 oops kernel: hda: ST380021A, ATA DISK drive
Jun 10 01:09:07 oops kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 10 01:09:07 oops kernel: hdc: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
Jun 10 01:09:07 oops kernel: hdd: HL-DT-ST GCE-8160B, ATAPI CD/DVD-ROM drive
Jun 10 01:09:07 oops kernel: hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
Jun 10 01:09:07 oops kernel: hdc: set_drive_speed_status: error=0x04
Jun 10 01:09:07 oops kernel: ide1: Drive 0 didn't accept speed setting. Oh, well.
Jun 10 01:09:07 oops kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jun 10 01:09:07 oops kernel: hda: max request size: 128KiB
Jun 10 01:09:07 oops kernel: hda: host protected area => 1
Jun 10 01:09:07 oops kernel: hda: 156301488 sectors (80026 MB) w/2048KiB Cache,
CHS=155061/16/63
Jun 10 01:09:07 oops kernel: hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 >
Unable to handle kernel paging request at virtual address 6b6b6b7f
printing eip:
c021f5a5
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[task_mulout_intr+309/608] Not tainted
EFLAGS: 00010202
EIP is at task_mulout_intr+0x135/0x260
eax: 000001f0 ebx: 6b6b6b6b ecx: 00000000 edx: 6b6b6b6b
esi: 00000008 edi: eb24e524 ebp: ef3bbc2c esp: ef3bbc08
ds: 007b es: 007b ss: 0068
Process kjournald (pid: 265, threadinfo=ef3ba000 task=ef556140)
Stack: c038bccc cf85b000 00000400 00000000 6b6b6b6b 00000008 c038bccc c038bccc
ef3bbc94 ef3bbc50 c021f748 c038bccc c038bccc 00000008 000000a1 00000032
c01deaf4 c038bc20 ef3bbc80 c021e4d6 c038bccc eb24e524 000001f7 00000000
Call Trace:
[pre_task_mulout_intr+120/128] pre_task_mulout_intr+0x78/0x80
[__delay+20/32] __delay+0x14/0x20
[do_rw_taskfile+326/720] do_rw_taskfile+0x146/0x2d0
[lba_28_rw_disk+164/176] lba_28_rw_disk+0xa4/0xb0
[pre_task_mulout_intr+0/128] pre_task_mulout_intr+0x0/0x80
[task_mulout_intr+0/608] task_mulout_intr+0x0/0x260
[SELECT_DRIVE+51/80] SELECT_DRIVE+0x33/0x50
[start_request+236/320] start_request+0xec/0x140
[ide_do_request+601/1264] ide_do_request+0x259/0x4f0
[do_ide_request+31/48] do_ide_request+0x1f/0x30
[generic_unplug_device+359/448] generic_unplug_device+0x167/0x1c0
[check_poison_obj+56/400] check_poison_obj+0x38/0x190
[blk_run_queues+318/832] blk_run_queues+0x13e/0x340
[generic_make_request+311/464] generic_make_request+0x137/0x1d0
[__wait_on_buffer+179/192] __wait_on_buffer+0xb3/0xc0
[autoremove_wake_function+0/80] autoremove_wake_function+0x0/0x50
[autoremove_wake_function+0/80] autoremove_wake_function+0x0/0x50
[sync_dirty_buffer+75/192] sync_dirty_buffer+0x4b/0xc0
[journal_commit_transaction+2499/6950] journal_commit_transaction+0x9c3/0x1b26
[start_request+236/320] start_request+0xec/0x140
[kjournald+377/864] kjournald+0x179/0x360
[commit_timeout+0/16] commit_timeout+0x0/0x10
[kjournald+0/864] kjournald+0x0/0x360
[kernel_thread_helper+5/24] kernel_thread_helper+0x5/0x18
Code: 0f b7 42 14 8b 5a 24 66 2b 47 24 0f b7 c0 8d 04 40 c1 e0 02
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/