linux-2.4.21-rc6-ac1 boots fine with APIC enabled, without the
"noapic" kernel parameter.
So, to install Mandrake 9.1, specify the "noapic" parameter, and once
installed, give linux-2.4.21-rc6-ac1 a try.
Alan, thanks for the fix. I was beginning to wonder if my KT400
chipset would be supported by a stable kernel.
Steve Brueggeman
On 03 Jun 2003 10:31:37 +0200, you wrote:
>Am Die, 2003-06-03 um 10.17 schrieb Henrik Storner:
>
>> My KT400 motherboard (Soltek) requires me to boot with the "noapic"
>> parameter, or it will hang in a similar manner. Did you try that,
>> or did you just enable/disable the APIC in the BIOS ?
>
>My ECS L7VTA will boot with APIC enabled but has interrupt problems
>with at least the NIC and thus will stop booting (over network that is).
>Alan told me yesterday in private that he thinks he knows the problem
>and has a solution in his -ac series.
>
>Haven't had a chance to try that though...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/