[PATCH][ANNOUNCE][1/1] 32way/8quad NUMAQ booting with NR_IRQS = 640
Zwane Mwaikambo (zwane@linuxpower.ca)
Fri, 30 May 2003 02:11:05 -0400 (EDT)
Index: linux-2.5.70-irqscale/arch/i386/kernel/doublefault.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/arch/i386/kernel/doublefault.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 doublefault.c
--- linux-2.5.70-irqscale/arch/i386/kernel/doublefault.c 27 May 2003 02:20:19 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/arch/i386/kernel/doublefault.c 30 May 2003 00:20:24 -0000
@@ -16,7 +16,7 @@ static unsigned long doublefault_stack[D
static void doublefault_fn(void)
{
- struct Xgt_desc_struct gdt_desc = {0, 0};
+ struct Xdt_desc_struct gdt_desc = {0, 0};
unsigned long gdt, tss;
__asm__ __volatile__("sgdt %0": "=m" (gdt_desc): :"memory");
Index: linux-2.5.70-irqscale/arch/i386/kernel/entry.S
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/arch/i386/kernel/entry.S,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 entry.S
--- linux-2.5.70-irqscale/arch/i386/kernel/entry.S 27 May 2003 02:20:19 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/arch/i386/kernel/entry.S 28 May 2003 20:16:43 -0000
@@ -374,27 +374,17 @@ syscall_badsys:
movl $-ENOSYS,EAX(%esp)
jmp resume_userspace
-/*
- * Build the entry stubs and pointer table with
- * some assembler magic.
- */
-.data
-ENTRY(interrupt)
-.text
-
+/* Build the IRQ entry stubs */
vector=0
-ENTRY(irq_entries_start)
+ .align IRQ_STUB_SIZE,0x90
+ENTRY(irq_entries)
.rept NR_IRQS
- ALIGN
-1: pushl $vector-256
+1: pushl $vector
jmp common_interrupt
-.data
- .long 1b
-.text
+ .align IRQ_STUB_SIZE,0x90
vector=vector+1
.endr
- ALIGN
common_interrupt:
SAVE_ALL
call do_IRQ
Index: linux-2.5.70-irqscale/arch/i386/kernel/head.S
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/arch/i386/kernel/head.S,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 head.S
--- linux-2.5.70-irqscale/arch/i386/kernel/head.S 27 May 2003 02:20:19 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/arch/i386/kernel/head.S 30 May 2003 00:20:24 -0000
@@ -249,7 +249,7 @@ is386: movl $2,%ecx # set MP
call check_x87
incb ready
lgdt cpu_gdt_descr
- lidt idt_descr
+ lidt node_idt_descr # we switch to the per-node IDTs later
ljmp $(__KERNEL_CS),$1f
1: movl $(__KERNEL_DS),%eax # reload all the segment registers
movl %eax,%ss # after changing gdt.
@@ -314,7 +314,7 @@ setup_idt:
movw %dx,%ax /* selector = 0x0010 = cs */
movw $0x8E00,%dx /* interrupt gate - dpl=0, present */
- lea idt_table,%edi
+ lea node_idt_table,%edi
mov $256,%ecx
rp_sidt:
movl %eax,(%edi)
@@ -359,14 +359,16 @@ ignore_int:
* segment size, and 32-bit linear address value:
*/
-.globl idt_descr
+.globl node_idt_descr
.globl cpu_gdt_descr
ALIGN
.word 0 # 32-bit align idt_desc.address
-idt_descr:
+node_idt_descr:
.word IDT_ENTRIES*8-1 # idt contains 256 entries
- .long idt_table
+ .long node_idt_table
+
+ .fill MAX_NUMNODES-1,8,0
# boot GDT descriptor (later on used by CPU#0):
.word 0 # 32 bit align gdt_desc.address
Index: linux-2.5.70-irqscale/arch/i386/kernel/i8259.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/arch/i386/kernel/i8259.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 i8259.c
--- linux-2.5.70-irqscale/arch/i386/kernel/i8259.c 27 May 2003 02:20:19 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/arch/i386/kernel/i8259.c 30 May 2003 01:17:25 -0000
@@ -427,10 +427,10 @@ void __init init_IRQ(void)
* us. (some of these will be overridden and become
* 'special' SMP interrupts)
*/
- for (i = 0; i < NR_IRQS; i++) {
+ for (i = 0; i < NR_DEVICE_VECTORS; i++) {
int vector = FIRST_EXTERNAL_VECTOR + i;
if (vector != SYSCALL_VECTOR)
- set_intr_gate(vector, interrupt[i]);
+ set_intr_gate(vector, &irq_entries[i]);
}
/* setup after call gates are initialised (usually add in
Index: linux-2.5.70-irqscale/arch/i386/kernel/io_apic.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/arch/i386/kernel/io_apic.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 io_apic.c
--- linux-2.5.70-irqscale/arch/i386/kernel/io_apic.c 27 May 2003 02:20:19 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/arch/i386/kernel/io_apic.c 30 May 2003 01:22:06 -0000
@@ -1117,24 +1117,54 @@ static inline int IO_APIC_irq_trigger(in
}
int irq_vector[NR_IRQS] = { FIRST_DEVICE_VECTOR , 0 };
-
-static int __init assign_irq_vector(int irq)
+int __initdata vector_allocated[MAX_NUMNODES][FIRST_SYSTEM_VECTOR];
+
+/*
+ * This is the per node vector allocator, it will only work for systems which have ioapics
+ * which can only deliver vectors to cpus on the same node and thus have hardware enforced
+ * ioapic/irq node affinity. However currently the only i386 systems which have this interrupt
+ * dispatching/servicing architecture are NUMAQ and x440. We try and 'share' vectors where
+ * possible to simplify cases where an irq can be serviced on multiple nodes due to it being
+ * present on multiple busses/nodes. The first pass on node0 will ensure we catch these node
+ * 'shared' irqs.
+ */
+static int __init assign_irq_vector(int irq, int node)
{
- static int current_vector = FIRST_DEVICE_VECTOR, offset = 0;
- if (IO_APIC_VECTOR(irq) > 0)
- return IO_APIC_VECTOR(irq);
+ static int current_vector[MAX_NUMNODES] = {[0 ... MAX_NUMNODES-1] = FIRST_DEVICE_VECTOR},
+ offset[MAX_NUMNODES];
+ int vector;
+
+ Dprintk("requesting vector for node%d/irq%d\n", node, irq);
+ vector = IO_APIC_VECTOR(irq);
+ if (vector > 0) {
+ Dprintk("returning previous allocation vector0x%x\n", vector);
+ vector_allocated[node][vector] = 1;
+ return vector;
+ }
+
next:
- current_vector += 8;
- if (current_vector == SYSCALL_VECTOR)
+ current_vector[node] += 8;
+ if (current_vector[node] == SYSCALL_VECTOR)
goto next;
-
- if (current_vector >= FIRST_SYSTEM_VECTOR) {
- offset = (offset + 1) & 7;
- current_vector = FIRST_DEVICE_VECTOR + offset;
+
+ if (current_vector[node] >= FIRST_SYSTEM_VECTOR) {
+ offset[node] = (offset[node] + 1) & 7;
+ current_vector[node] = FIRST_DEVICE_VECTOR + offset[node];
}
- IO_APIC_VECTOR(irq) = current_vector;
- return current_vector;
+ if (current_vector[node] == FIRST_SYSTEM_VECTOR)
+ return -ENOSPC;
+
+ vector = current_vector[node];
+ if (vector_allocated[node][vector])
+ goto next;
+
+ vector_allocated[node][vector] = 1;
+ IO_APIC_VECTOR(irq) = vector;
+ Dprintk("returning new allocation node%d/irq%d -> vector0x%x\n",
+ node, irq, vector);
+
+ return vector;
}
static struct hw_interrupt_type ioapic_level_irq_type;
@@ -1143,7 +1173,7 @@ static struct hw_interrupt_type ioapic_e
void __init setup_IO_APIC_irqs(void)
{
struct IO_APIC_route_entry entry;
- int apic, pin, idx, irq, first_notcon = 1, vector;
+ int apic, pin, idx, irq, first_notcon = 1, vector, bus, node;
unsigned long flags;
printk(KERN_DEBUG "init IO_APIC IRQs\n");
@@ -1160,11 +1190,12 @@ void __init setup_IO_APIC_irqs(void)
entry.dest_mode = INT_DEST_MODE;
entry.mask = 0; /* enable IRQ */
entry.dest.logical.logical_dest = TARGET_CPUS;
-
+
idx = find_irq_entry(apic,pin,mp_INT);
if (idx == -1) {
if (first_notcon) {
- printk(KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin);
+ printk(KERN_DEBUG " IO-APIC (apicid-pin) %d-%d",
+ mp_ioapics[apic].mpc_apicid, pin);
first_notcon = 0;
} else
printk(", %d-%d", mp_ioapics[apic].mpc_apicid, pin);
@@ -1174,12 +1205,21 @@ void __init setup_IO_APIC_irqs(void)
entry.trigger = irq_trigger(idx);
entry.polarity = irq_polarity(idx);
+ bus = mp_irqs[idx].mpc_srcbus;
+ node = mp_bus_id_to_node[bus];
+
if (irq_trigger(idx)) {
entry.trigger = 1;
entry.mask = 1;
}
irq = pin_2_irq(idx, apic, pin);
+ if (irq >= NR_IRQS) {
+ printk("skipping irq%d on node%d/bus%d/ioapic%d out of IRQs!\n",
+ irq, node, bus, apic);
+ continue;
+ }
+
/*
* skip adding the timer int on secondary nodes, which causes
* a small but painful rift in the time-space continuum
@@ -1193,15 +1233,20 @@ void __init setup_IO_APIC_irqs(void)
continue;
if (IO_APIC_IRQ(irq)) {
- vector = assign_irq_vector(irq);
- entry.vector = vector;
+ vector = assign_irq_vector(irq, node);
+ if (vector < 0)
+ continue;
+ entry.vector = vector;
if (IO_APIC_irq_trigger(irq))
irq_desc[irq].handler = &ioapic_level_irq_type;
else
irq_desc[irq].handler = &ioapic_edge_irq_type;
- set_intr_gate(vector, interrupt[irq]);
+ Dprintk("irq_setup: node%d/bus%d/ioapic%d/vector0x%x - irq%d %p\n",
+ node, bus, apic, vector, irq, &irq_entries[irq]);
+
+ node_set_intr_gate(node, vector, &irq_entries[irq]);
if (!apic && (irq < 16))
disable_8259A_irq(irq);
@@ -1896,6 +1941,7 @@ static inline void init_IO_APIC_traps(vo
* so default to an old-fashioned 8259
* interrupt if we can..
*/
+ printk(KERN_DEBUG "irq%d not serviced by IOAPIC\n", irq);
if (irq < 16)
make_8259A_irq(irq);
else
@@ -2034,8 +2080,10 @@ static inline void check_timer(void)
* get/set the timer IRQ vector:
*/
disable_8259A_irq(0);
- vector = assign_irq_vector(0);
- set_intr_gate(vector, interrupt[0]);
+
+ vector = assign_irq_vector(0, cpu_to_node(smp_processor_id()));
+ /* This gets reserved on all nodes as FIRST_DEVICE_VECTOR */
+ set_intr_gate(vector, &irq_entries[0]);
/*
* Subtle, code in do_timer_interrupt() expects an AEOI
@@ -2291,10 +2339,10 @@ int io_apic_set_pci_routing (int ioapic,
{
struct IO_APIC_route_entry entry;
unsigned long flags;
+ int node, bus, vector;
if (!IO_APIC_IRQ(irq)) {
- printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0/n",
- ioapic);
+ printk(KERN_ERR "ioapic%d invalid reference to IRQ0/n", ioapic);
return -EINVAL;
}
@@ -2315,7 +2363,18 @@ int io_apic_set_pci_routing (int ioapic,
add_pin_to_irq(irq, ioapic, pin);
- entry.vector = assign_irq_vector(irq);
+ /* XXX verify this with an x440 and plain ACPI/SMP -zwane */
+ bus = mp_irqs[pin].mpc_srcbus;
+ node = mp_bus_id_to_node[bus];
+
+ vector = assign_irq_vector(irq, node);
+ if (vector < 0)
+ return -ENOSPC;
+
+ entry.vector = vector;
+ printk(KERN_DEBUG "NODE[%d] IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
+ "IRQ %d)\n", node, ioapic,
+ mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq);
printk(KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
"IRQ %d)\n", ioapic,
@@ -2323,7 +2382,7 @@ int io_apic_set_pci_routing (int ioapic,
irq_desc[irq].handler = &ioapic_level_irq_type;
- set_intr_gate(entry.vector, interrupt[irq]);
+ node_set_intr_gate(node, entry.vector, &irq_entries[irq]);
if (!ioapic && (irq < 16))
disable_8259A_irq(irq);
Index: linux-2.5.70-irqscale/arch/i386/kernel/irq.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/arch/i386/kernel/irq.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 irq.c
--- linux-2.5.70-irqscale/arch/i386/kernel/irq.c 27 May 2003 02:20:19 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/arch/i386/kernel/irq.c 28 May 2003 20:16:43 -0000
@@ -354,7 +354,7 @@ asmlinkage unsigned int do_IRQ(struct pt
* 0 return value means that this irq is already being
* handled by some other CPU. (or is disabled)
*/
- int irq = regs.orig_eax & 0xff; /* high bits used in ret_from_ code */
+ int irq = regs.orig_eax;
int cpu = smp_processor_id();
irq_desc_t *desc = irq_desc + irq;
struct irqaction * action;
Index: linux-2.5.70-irqscale/arch/i386/kernel/smpboot.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/arch/i386/kernel/smpboot.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 smpboot.c
--- linux-2.5.70-irqscale/arch/i386/kernel/smpboot.c 27 May 2003 02:20:19 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/arch/i386/kernel/smpboot.c 30 May 2003 00:20:25 -0000
@@ -45,6 +45,7 @@
#include <linux/delay.h>
#include <linux/mc146818rtc.h>
+#include <asm/cpu.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/desc.h>
@@ -442,6 +443,7 @@ int __init start_secondary(void *unused)
*/
cpu_init();
smp_callin();
+ setup_cpu_idt();
while (!test_bit(smp_processor_id(), &smp_commenced_mask))
rep_nop();
setup_secondary_APIC_clock();
@@ -949,7 +951,7 @@ static void __init smp_boot_cpus(unsigne
current_thread_info()->cpu = 0;
smp_tune_scheduling();
-
+
/*
* If we couldn't find an SMP configuration at boot time,
* get out of here now!
@@ -1165,7 +1167,7 @@ void __init smp_intr_init(void)
* IRQ0 must be given a fixed assignment and initialized,
* because it's used before the IO-APIC is set up.
*/
- set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
+ set_intr_gate(FIRST_DEVICE_VECTOR, &irq_entries[0]);
/*
* The reschedule interrupt is a CPU-to-CPU reschedule-helper
Index: linux-2.5.70-irqscale/arch/i386/kernel/traps.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/arch/i386/kernel/traps.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 traps.c
--- linux-2.5.70-irqscale/arch/i386/kernel/traps.c 27 May 2003 02:20:19 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/arch/i386/kernel/traps.c 30 May 2003 01:23:22 -0000
@@ -30,6 +30,7 @@
#include <linux/ioport.h>
#endif
+#include <asm/cpu.h>
#ifdef CONFIG_MCA
#include <linux/mca.h>
#include <asm/processor.h>
@@ -68,7 +69,9 @@ char ignore_fpu_irq = 0;
* F0 0F bug workaround.. We have a special link segment
* for this.
*/
-struct desc_struct idt_table[256] __attribute__((__section__(".data.idt"))) = { {0, 0}, };
+
+struct desc_struct node_idt_table[MAX_NUMNODES][IDT_ENTRIES] __attribute__((__section__(".data.idt"))) =
+ {[0 ... MAX_NUMNODES-1] = { {0, 0}, }};
asmlinkage void divide_error(void);
asmlinkage void debug(void);
@@ -774,14 +777,16 @@ asmlinkage void math_emulate(long arg)
#ifdef CONFIG_X86_F00F_BUG
void __init trap_init_f00f_bug(void)
{
- __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);
+ int node = cpu_to_node(smp_processor_id());
+
+ __set_fixmap(FIX_F00F_IDT, __pa(&node_idt_table[node]), PAGE_KERNEL_RO);
/*
* Update the IDT descriptor and reload the IDT so that
* it uses the read-only mapped virtual address.
*/
- idt_descr.address = fix_to_virt(FIX_F00F_IDT);
- __asm__ __volatile__("lidt %0": "=m" (idt_descr));
+ node_idt_descr[node].address = fix_to_virt(FIX_F00F_IDT);
+ __asm__ __volatile__("lidt %0": "=m" (node_idt_descr[node]));
}
#endif
@@ -800,24 +805,36 @@ do { \
/*
- * This needs to use 'idt_table' rather than 'idt', and
+ * This needs to use 'node_idt_table' rather than 'idt', and
* thus use the _nonmapped_ version of the IDT, as the
* Pentium F0 0F bugfix can have resulted in the mapped
* IDT being write-protected.
*/
+
+void node_set_intr_gate(unsigned int node, unsigned int n, void *addr)
+{
+ _set_gate(&node_idt_table[node][n],14,0,addr,__KERNEL_CS);
+}
+
void set_intr_gate(unsigned int n, void *addr)
{
- _set_gate(idt_table+n,14,0,addr,__KERNEL_CS);
+ int node;
+ for (node = 0; node < MAX_NUMNODES; node++)
+ node_set_intr_gate(node, n, addr);
}
static void __init set_trap_gate(unsigned int n, void *addr)
{
- _set_gate(idt_table+n,15,0,addr,__KERNEL_CS);
+ int node;
+ for (node = 0; node < MAX_NUMNODES; node++)
+ _set_gate(&node_idt_table[node][n],15,0,addr,__KERNEL_CS);
}
static void __init set_system_gate(unsigned int n, void *addr)
{
- _set_gate(idt_table+n,15,3,addr,__KERNEL_CS);
+ int node;
+ for (node = 0; node < MAX_NUMNODES; node++)
+ _set_gate(&node_idt_table[node][n],15,3,addr,__KERNEL_CS);
}
static void __init set_call_gate(void *a, void *addr)
@@ -827,7 +844,9 @@ static void __init set_call_gate(void *a
static void __init set_task_gate(unsigned int n, unsigned int gdt_entry)
{
- _set_gate(idt_table+n,5,0,0,(gdt_entry<<3));
+ int node;
+ for (node = 0; node < MAX_NUMNODES; node++)
+ _set_gate(&node_idt_table[node][n],5,0,0,(gdt_entry<<3));
}
@@ -847,6 +866,7 @@ void __init trap_init(void)
init_apic_mappings();
#endif
+ /* setup the default IDT */
set_trap_gate(0,÷_error);
set_intr_gate(1,&debug);
set_intr_gate(2,&nmi);
@@ -878,6 +898,9 @@ void __init trap_init(void)
*/
set_call_gate(&default_ldt[0],lcall7);
set_call_gate(&default_ldt[4],lcall27);
+
+ /* setup the pernode idt tables */
+ setup_node_idts();
/*
* Should be a barrier for any external CPU state.
Index: linux-2.5.70-irqscale/arch/i386/kernel/cpu/common.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/arch/i386/kernel/cpu/common.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 common.c
--- linux-2.5.70-irqscale/arch/i386/kernel/cpu/common.c 27 May 2003 02:20:19 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/arch/i386/kernel/cpu/common.c 30 May 2003 00:20:25 -0000
@@ -433,9 +433,9 @@ void __init early_cpu_init(void)
}
/*
* cpu_init() initializes state that is per-CPU. Some data is already
- * initialized (naturally) in the bootstrap process, such as the GDT
- * and IDT. We reload them nevertheless, this function acts as a
- * 'CPU state barrier', nothing should get across.
+ * initialized (naturally) in the bootstrap process, such as the GDT.
+ * We reload them nevertheless, this function acts as a 'CPU state barrier',
+ * nothing should get across.
*/
void __init cpu_init (void)
{
@@ -459,8 +459,8 @@ void __init cpu_init (void)
}
/*
- * Initialize the per-CPU GDT with the boot GDT,
- * and set up the GDT descriptor:
+ * Initialize the per-CPU GDTs with the boot equivalents,
+ * and set up the descriptors:
*/
if (cpu) {
memcpy(cpu_gdt_table[cpu], cpu_gdt_table[0], GDT_SIZE);
@@ -473,7 +473,6 @@ void __init cpu_init (void)
memcpy(thread->tls_array, cpu_gdt_table[cpu], GDT_ENTRY_TLS_ENTRIES * 8);
__asm__ __volatile__("lgdt %0": "=m" (cpu_gdt_descr[cpu]));
- __asm__ __volatile__("lidt %0": "=m" (idt_descr));
/*
* Delete NT
@@ -517,3 +516,31 @@ void __init cpu_init (void)
current->used_math = 0;
stts();
}
+
+/*
+ * copy over the boot node idt across all nodes, we currently only have
+ * non-unique idt entries for device io interrupts.
+ */
+void __init setup_node_idts(void)
+{
+ int node = MAX_NUMNODES;
+
+ /* we can skip setting up node0 since it's done in head.S */
+ while (--node) {
+ memcpy(node_idt_table[node], node_idt_table[0], IDT_SIZE);
+ node_idt_descr[node].size = IDT_SIZE - 1;
+ node_idt_descr[node].address = (unsigned long)node_idt_table[node];
+ }
+}
+
+void __init setup_cpu_idt(void)
+{
+ int cpu = smp_processor_id(), node = cpu_to_node(cpu);
+
+ printk(KERN_DEBUG "CPU%d IDT at 0x%08lx\n",
+ cpu, node_idt_descr[node].address);
+
+ /* reload the idt on all processors as they come up */
+ __asm__ __volatile__("lidt %0": "=m" (node_idt_descr[node]));
+}
+
Index: linux-2.5.70-irqscale/arch/i386/mm/fault.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/arch/i386/mm/fault.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 fault.c
--- linux-2.5.70-irqscale/arch/i386/mm/fault.c 27 May 2003 02:20:20 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/arch/i386/mm/fault.c 30 May 2003 00:20:25 -0000
@@ -216,9 +216,9 @@ bad_area:
* Pentium F0 0F C7 C8 bug workaround.
*/
if (boot_cpu_data.f00f_bug) {
- unsigned long nr;
-
- nr = (address - idt_descr.address) >> 3;
+ unsigned long nr, node;
+ node = cpu_to_node(smp_processor_id());
+ nr = (address - node_idt_descr[node].address) >> 3;
if (nr == 6) {
do_invalid_op(regs, 0);
Index: linux-2.5.70-irqscale/include/asm-i386/cpu.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/cpu.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 cpu.h
--- linux-2.5.70-irqscale/include/asm-i386/cpu.h 27 May 2003 02:20:10 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/cpu.h 30 May 2003 00:20:25 -0000
@@ -23,4 +23,6 @@ static inline int arch_register_cpu(int
return register_cpu(&cpu_devices[num].cpu, num, parent);
}
+extern void setup_cpu_idt(void);
+extern void setup_node_idts(void);
#endif /* _ASM_I386_CPU_H_ */
Index: linux-2.5.70-irqscale/include/asm-i386/desc.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/desc.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 desc.h
--- linux-2.5.70-irqscale/include/asm-i386/desc.h 27 May 2003 02:20:10 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/desc.h 30 May 2003 00:20:25 -0000
@@ -2,6 +2,7 @@
#define __ARCH_DESC_H
#include <asm/ldt.h>
+#include <asm/numnodes.h>
#include <asm/segment.h>
#ifndef __ASSEMBLY__
@@ -12,14 +13,15 @@
#include <asm/mmu.h>
extern struct desc_struct cpu_gdt_table[NR_CPUS][GDT_ENTRIES];
+extern struct desc_struct node_idt_table[MAX_NUMNODES][IDT_ENTRIES];
-struct Xgt_desc_struct {
+struct Xdt_desc_struct {
unsigned short size;
unsigned long address __attribute__((packed));
unsigned short pad;
} __attribute__ ((packed));
-extern struct Xgt_desc_struct idt_descr, cpu_gdt_descr[NR_CPUS];
+extern struct Xdt_desc_struct node_idt_descr[MAX_NUMNODES], cpu_gdt_descr[NR_CPUS];
#define load_TR_desc() __asm__ __volatile__("ltr %%ax"::"a" (GDT_ENTRY_TSS*8))
#define load_LDT_desc() __asm__ __volatile__("lldt %%ax"::"a" (GDT_ENTRY_LDT*8))
@@ -29,7 +31,8 @@ extern struct Xgt_desc_struct idt_descr,
* something other than this.
*/
extern struct desc_struct default_ldt[];
-extern void set_intr_gate(unsigned int irq, void * addr);
+extern void node_set_intr_gate(unsigned int node, unsigned int vector, void * addr);
+extern void set_intr_gate(unsigned int n, void *addr);
#define _set_tssldt_desc(n,addr,limit,type) \
__asm__ __volatile__ ("movw %w3,0(%2)\n\t" \
Index: linux-2.5.70-irqscale/include/asm-i386/hardirq.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/hardirq.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 hardirq.h
--- linux-2.5.70-irqscale/include/asm-i386/hardirq.h 27 May 2003 02:20:10 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/hardirq.h 30 May 2003 01:29:53 -0000
@@ -20,20 +20,20 @@ typedef struct {
* We put the hardirq and softirq counter into the preemption
* counter. The bitmask has the following meaning:
*
- * - bits 0-7 are the preemption count (max preemption depth: 256)
- * - bits 8-15 are the softirq count (max # of softirqs: 256)
- * - bits 16-23 are the hardirq count (max # of hardirqs: 256)
+ * - bits 0-9 are the preemption count (max preemption depth: 256)
+ * - bits 10-19 are the softirq count (max # of softirqs: 256)
+ * - bits 20-29 are the hardirq count (max # of hardirqs: 256)
*
- * - ( bit 26 is the PREEMPT_ACTIVE flag. )
+ * - ( bit 31 is the PREEMPT_ACTIVE flag. )
*
- * PREEMPT_MASK: 0x000000ff
- * SOFTIRQ_MASK: 0x0000ff00
- * HARDIRQ_MASK: 0x00ff0000
+ * PREEMPT_MASK: 0x000003ff
+ * SOFTIRQ_MASK: 0x000ffc00
+ * HARDIRQ_MASK: 0x3ff00000
*/
-#define PREEMPT_BITS 8
-#define SOFTIRQ_BITS 8
-#define HARDIRQ_BITS 8
+#define PREEMPT_BITS 10
+#define SOFTIRQ_BITS 10
+#define HARDIRQ_BITS 10
#define PREEMPT_SHIFT 0
#define SOFTIRQ_SHIFT (PREEMPT_SHIFT + PREEMPT_BITS)
Index: linux-2.5.70-irqscale/include/asm-i386/hw_irq.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/hw_irq.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 hw_irq.h
--- linux-2.5.70-irqscale/include/asm-i386/hw_irq.h 27 May 2003 02:20:10 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/hw_irq.h 28 May 2003 20:16:43 -0000
@@ -27,7 +27,7 @@
extern int irq_vector[NR_IRQS];
#define IO_APIC_VECTOR(irq) irq_vector[irq]
-extern void (*interrupt[NR_IRQS])(void);
+extern char irq_entries[NR_IRQS][IRQ_STUB_SIZE];
#ifdef CONFIG_SMP
extern asmlinkage void reschedule_interrupt(void);
Index: linux-2.5.70-irqscale/include/asm-i386/numaq.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/numaq.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 numaq.h
--- linux-2.5.70-irqscale/include/asm-i386/numaq.h 27 May 2003 02:20:10 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/numaq.h 30 May 2003 00:20:25 -0000
@@ -29,6 +29,8 @@
#ifdef CONFIG_X86_NUMAQ
#define MAX_NUMNODES 8
+
+#ifndef __ASSEMBLY__
extern void get_memcfg_numaq(void);
#define get_memcfg_numa() get_memcfg_numaq()
@@ -161,6 +163,7 @@ static inline unsigned long *get_zholes_
{
return 0;
}
+#endif /* __ASSEMBLY__ */
#endif /* CONFIG_X86_NUMAQ */
#endif /* NUMAQ_H */
Index: linux-2.5.70-irqscale/include/asm-i386/segment.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/segment.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 segment.h
--- linux-2.5.70-irqscale/include/asm-i386/segment.h 27 May 2003 02:20:10 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/segment.h 30 May 2003 00:20:25 -0000
@@ -94,5 +94,5 @@
* of tasks we can have..
*/
#define IDT_ENTRIES 256
-
+#define IDT_SIZE (IDT_ENTRIES * 8)
#endif
Index: linux-2.5.70-irqscale/include/asm-i386/srat.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/srat.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 srat.h
--- linux-2.5.70-irqscale/include/asm-i386/srat.h 27 May 2003 02:20:10 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/srat.h 30 May 2003 00:20:25 -0000
@@ -28,8 +28,9 @@
#define _ASM_SRAT_H_
#define MAX_NUMNODES 8
+#ifndef __ASSEMBLY__
extern void get_memcfg_from_srat(void);
extern unsigned long *get_zholes_size(int);
#define get_memcfg_numa() get_memcfg_from_srat()
-
+#endif
#endif /* _ASM_SRAT_H_ */
Index: linux-2.5.70-irqscale/include/asm-i386/thread_info.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/thread_info.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 thread_info.h
--- linux-2.5.70-irqscale/include/asm-i386/thread_info.h 27 May 2003 02:20:10 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/thread_info.h 30 May 2003 01:31:00 -0000
@@ -52,7 +52,11 @@ struct thread_info {
#endif
-#define PREEMPT_ACTIVE 0x4000000
+#ifdef __ASSEMBLY__
+#define PREEMPT_ACTIVE 0x80000000
+#else
+#define PREEMPT_ACTIVE 0x80000000UL
+#endif
/*
* macros/functions for gaining access to the thread information structure
Index: linux-2.5.70-irqscale/include/asm-i386/mach-default/irq_vectors.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/mach-default/irq_vectors.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 irq_vectors.h
--- linux-2.5.70-irqscale/include/asm-i386/mach-default/irq_vectors.h 27 May 2003 02:20:10 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/mach-default/irq_vectors.h 30 May 2003 01:17:41 -0000
@@ -77,10 +77,15 @@
* the usable vector space is 0x20-0xff (224 vectors)
*/
#ifdef CONFIG_X86_IO_APIC
-#define NR_IRQS 224
+#define NR_IRQS 640
+#define IRQ_STUB_SIZE 16
#else
#define NR_IRQS 16
+#define IRQ_STUB_SIZE 8
#endif
+
+/* number of vectors available for external interrupts in Linux */
+#define NR_DEVICE_VECTORS 190
#define FPU_IRQ 13
Index: linux-2.5.70-irqscale/include/asm-i386/mach-pc9800/irq_vectors.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/mach-pc9800/irq_vectors.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 irq_vectors.h
--- linux-2.5.70-irqscale/include/asm-i386/mach-pc9800/irq_vectors.h 27 May 2003 02:20:11 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/mach-pc9800/irq_vectors.h 28 May 2003 20:16:43 -0000
@@ -78,8 +78,10 @@
*/
#ifdef CONFIG_X86_IO_APIC
#define NR_IRQS 224
+#define IRQ_STUB_SIZE 16
#else
#define NR_IRQS 16
+#define IRQ_STUB_SIZE 8
#endif
#define FPU_IRQ 8
Index: linux-2.5.70-irqscale/include/asm-i386/mach-visws/irq_vectors.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/mach-visws/irq_vectors.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 irq_vectors.h
--- linux-2.5.70-irqscale/include/asm-i386/mach-visws/irq_vectors.h 27 May 2003 02:20:10 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/mach-visws/irq_vectors.h 28 May 2003 20:16:43 -0000
@@ -50,6 +50,7 @@
*
*/
#define NR_IRQS 224
+#define IRQ_STUB_SIZE 16
#define FPU_IRQ 13
Index: linux-2.5.70-irqscale/include/asm-i386/mach-voyager/irq_vectors.h
===================================================================
RCS file: /build/cvsroot/linux-2.5.70/include/asm-i386/mach-voyager/irq_vectors.h,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 irq_vectors.h
--- linux-2.5.70-irqscale/include/asm-i386/mach-voyager/irq_vectors.h 27 May 2003 02:20:10 -0000 1.1.1.1
+++ linux-2.5.70-irqscale/include/asm-i386/mach-voyager/irq_vectors.h 28 May 2003 20:16:43 -0000
@@ -56,6 +56,7 @@
#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8)
#define NR_IRQS 224
+#define IRQ_STUB_SIZE 16
#define FPU_IRQ 13
--
function.linuxpower.ca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/