Re: 21rc6 serverworks IDE blows even more than is usual :)

Here is mine which doesn't work.

00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
00: 66 11 01 02 47 00 00 22 93 00 01 06 00 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 01 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 06 1e 0c 03 00 00 00 07 0f 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 8f c3 d1 15 00 00 00 20 00 00 00 00
70: 0f 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 01 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: a1 0e 00 00 80 00 5d 0f ff 0f 04 10 01 aa 00 ac
b0: 00 07 1c 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 03 58 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
00: 66 11 12 02 45 01 00 02 93 82 01 01 08 40 80 00
10: f1 01 00 00 f5 03 00 00 01 00 00 00 01 00 00 00
20: 01 20 00 00 00 00 00 00 00 00 00 00 66 11 12 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 5d 20 5d 5d ff 00 ff ff 00 01 04 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 0f 04 03 00 00 00 00 00
60: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Steve

Duncan Laurie wrote:

> On Thu, 29 May 2003 13:40:01 +0200, Tomas Szepe 
> <[e-mail]> wrote:
>
>>
>> I can't seem to get the onboard Serverworks CSB5 IDE controller (rev 93)
>> in a Compaq Proliant ML350 G3 to work (reliably/at all) no matter what
>> kernel I use:
>>
>
> Hi Tomas,
>
> This problem *may* actually be in the hardware...  IIRC the CSB5 rev 
> 93h is
> the A2.1 version of the chip which had big problems with DMA.  The 
> workaround
> options included a messy rework of the PCB or forcing it into PIO 
> mode, so we
> decided instead to just stick with the A2.0 revision. :)
>
> However all of my knowledge about this particular issue is based on 
> >1yr old
> information, so if you want to send the output of "lspci -xxx" for pci 
> devices
> 00:0f.0 and 00:0f.1 I will check them over for any obvious settings 
> the BIOS
> may have missed.
>
> -duncan
>
> -
> To unsubscribe from this list: send the line "unsubscribe 
> linux-kernel" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
>