Re: siimage driver status

[Alan Cox]

On Iau, 2003-05-29 at 15:32, Wm. Josiah Erikson wrote:
> hard drives that I'm trying to get to work with linux 2.4.21-rc6. The 
> problem I'm having is that it's REALLY slow and crashy. The kernel reports 
> this on bootup:

I'm running the siimage driver fine with several drives. Your setup is
intriguing in that the BIOS has chosen to leave the drives in PIO mode

> SiI3112 Serial ATA: IDE controller at PCI slot 01:0b.0
> SiI3112 Serial ATA: chipset revision 2
> SiI3112 Serial ATA: not 100% native mode: will probe irqs later
>     ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
>     ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio

Really the SATA drives ought to have come up in UDMA

> everything else on my system to a temporary halt, and hdparm -t reports 
> about 1.3MB/sec reads. This is a bummer, as I was hoping to RAID 0 them 
> together and make them my boot drives :)
> 
> If I try and enable DMA, the machine instantly hardlocks.

Thats with hdparm -X66 -d1 ?

The only updates to the siimage driver are those in 2.4.21-ac which you 
shouldn't need.