01:01.0 Unknown mass storage controller: CMD Technology Inc: Unknown
device 3112 (rev 01)
SiI3112 Serial ATA: IDE controller at PCI slot 01:01.0
SiI3112 Serial ATA: chipset revision 1
SiI3112 Serial ATA: not 100% native mode: will probe irqs later
ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
The drives are Maxtor 4A250J0 parallel ATA with Silicon Image
converters.
hdparm -i /dev/hde
/dev/hde:
Model=Maxtor 4A250J0, FwRev=RAMB1TU0, SerialNo=A804KZ3E
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null): 1 2 3 4 5 6 7
running under 2.4.21-pre4-ac1 and I get continual errors of:
May 29 12:42:42 calamari kernel: hde: sata_error = 0x00000000, watchdog
= 0, siimage_mmio_ide_dma_test_irq
May 29 12:42:42 calamari kernel: hdg: sata_error = 0x00000000, watchdog
= 0, siimage_mmio_ide_dma_test_irq
as soon as I turn dma on.
If I remove the printk from siimage.c they seem to run fine, with good
performance, so I wonder if this error might be bogus?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/