Rather than having a single "acorn_partition" parser for all these
types, we list them explicitly in check.c instead, along with some
explaination about why they're where they are.
--- orig/fs/partitions/Kconfig Mon Mar 24 23:47:27 2003
+++ linux/fs/partitions/Kconfig Mon Mar 24 23:57:55 2003
@@ -20,7 +20,17 @@
help
Support hard disks partitioned under Acorn operating systems.
-# bool ' Cumana partition support' CONFIG_ACORN_PARTITION_CUMANA
+config ACORN_PARTITION_CUMANA
+ bool "Cumana partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+ default y if !PARTITION_ADVANCED && ARCH_ACORN
+ help
+ Say Y here if you would like to use hard disks under Linux which
+ were partitioned using the Cumana interface on Acorn machines.
+
+config ACORN_PARTITION_EESOX
+ bool "EESOX partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+ default y if !PARTITION_ADVANCED && ARCH_ACORN
+
config ACORN_PARTITION_ICS
bool "ICS partition support" if PARTITION_ADVANCED && ACORN_PARTITION
default y if !PARTITION_ADVANCED && ARCH_ACORN
--- orig/fs/partitions/acorn.c Thu Jul 25 20:13:49 2002
+++ linux/fs/partitions/acorn.c Wed May 28 14:53:24 2003
@@ -7,14 +7,25 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Scan ADFS partitions on hard disk drives.
+ * Scan ADFS partitions on hard disk drives. Unfortunately, there
+ * isn't a standard for partitioning drives on Acorn machines, so
+ * every single manufacturer of SCSI and IDE cards created their own
+ * method.
*/
#include <linux/config.h>
#include <linux/buffer_head.h>
+#include <linux/adfs_fs.h>
#include "check.h"
#include "acorn.h"
+/*
+ * Partition types. (Oh for reusability)
+ */
+#define PARTITION_RISCIX_MFM 1
+#define PARTITION_RISCIX_SCSI 2
+#define PARTITION_LINUX 9
+
static struct adfs_discrecord *
adfs_partition(struct parsed_partitions *state, char *name, char *data,
unsigned long first_sector, int slot)
@@ -40,6 +51,21 @@
}
#ifdef CONFIG_ACORN_PARTITION_RISCIX
+
+struct riscix_part {
+ __u32 start;
+ __u32 length;
+ __u32 one;
+ char name[16];
+};
+
+struct riscix_record {
+ __u32 magic;
+#define RISCIX_MAGIC (0x4a657320)
+ __u32 date;
+ struct riscix_part part[8];
+};
+
static int
riscix_partition(struct parsed_partitions *state, struct block_device *bdev,
unsigned long first_sect, int slot, unsigned long nr_sects)
@@ -81,6 +107,15 @@
}
#endif
+#define LINUX_NATIVE_MAGIC 0xdeafa1de
+#define LINUX_SWAP_MAGIC 0xdeafab1e
+
+struct linux_part {
+ __u32 magic;
+ __u32 start_sect;
+ __u32 nr_sects;
+};
+
static int
linux_partition(struct parsed_partitions *state, struct block_device *bdev,
unsigned long first_sect, int slot, unsigned long nr_sects)
@@ -114,7 +149,7 @@
}
#ifdef CONFIG_ACORN_PARTITION_CUMANA
-static int
+int
adfspart_check_CUMANA(struct parsed_partitions *state, struct block_device *bdev)
{
unsigned long first_sector = 0;
@@ -126,7 +161,7 @@
int slot = 1;
/*
- * Try Cumana style partitions - sector 3 contains ADFS boot block
+ * Try Cumana style partitions - sector 6 contains ADFS boot block
* with pointer to next 'drive'.
*
* There are unknowns in this code - is the 'cylinder number' of the
@@ -206,7 +241,7 @@
* hda1 = ADFS partition on first drive.
* hda2 = non-ADFS partition.
*/
-static int
+int
adfspart_check_ADFS(struct parsed_partitions *state, struct block_device *bdev)
{
unsigned long start_sect, nr_sects, sectscyl, heads;
@@ -263,11 +298,18 @@
break;
}
}
+ printk("\n");
return 1;
}
#endif
#ifdef CONFIG_ACORN_PARTITION_ICS
+
+struct ics_part {
+ __u32 start;
+ __s32 size;
+};
+
static int adfspart_check_ICSLinux(struct block_device *bdev, unsigned long block)
{
Sector sect;
@@ -284,6 +326,22 @@
}
/*
+ * Check for a valid ICS partition using the checksum.
+ */
+static inline int valid_ics_sector(const unsigned char *data)
+{
+ unsigned long sum;
+ int i;
+
+ for (i = 0, sum = 0x50617274; i < 508; i++)
+ sum += data[i];
+
+ sum -= le32_to_cpu(*(__u32 *)(&data[508]));
+
+ return sum == 0;
+}
+
+/*
* Purpose: allocate ICS partitions.
* Params : hd - pointer to gendisk structure to store partition info.
* dev - device number to access.
@@ -293,15 +351,13 @@
* hda2 = ADFS partition 1 on first drive.
* ..etc..
*/
-static int
+int
adfspart_check_ICS(struct parsed_partitions *state, struct block_device *bdev)
{
- Sector sect;
- unsigned char *data;
- unsigned long sum;
- unsigned int i;
+ const unsigned char *data;
+ const struct ics_part *p;
int slot;
- struct ics_part *p;
+ Sector sect;
/*
* Try ICS style partitions - sector 0 contains partition info.
@@ -310,33 +366,33 @@
if (!data)
return -1;
- /*
- * check for a valid checksum
- */
- for (i = 0, sum = 0x50617274; i < 508; i++)
- sum += data[i];
-
- sum -= le32_to_cpu(*(__u32 *)(&data[508]));
- if (sum) {
+ if (!valid_ics_sector(data)) {
put_dev_sector(sect);
- return 0; /* not ICS partition table */
+ return 0;
}
printk(" [ICS]");
- for (slot = 1, p = (struct ics_part *)data; p->size; p++) {
+ for (slot = 1, p = (const struct ics_part *)data; p->size; p++) {
u32 start = le32_to_cpu(p->start);
- u32 size = le32_to_cpu(p->size);
+ s32 size = le32_to_cpu(p->size); /* yes, it's signed. */
if (slot == state->limit)
break;
+ /*
+ * Negative sizes tell the RISC OS ICS driver to ignore
+ * this partition - in effect it says that this does not
+ * contain an ADFS filesystem.
+ */
if (size < 0) {
size = -size;
/*
- * We use the first sector to identify what type
- * this partition is...
+ * Our own extension - We use the first sector
+ * of the partition to identify what type this
+ * partition is. We must not make this visible
+ * to the filesystem.
*/
if (size > 1 && adfspart_check_ICSLinux(bdev, start)) {
start += 1;
@@ -349,10 +405,39 @@
}
put_dev_sector(sect);
+ printk("\n");
return 1;
}
#endif
+#ifdef CONFIG_ACORN_PARTITION_POWERTEC
+struct ptec_part {
+ __u32 unused1;
+ __u32 unused2;
+ __u32 start;
+ __u32 size;
+ __u32 unused5;
+ char type[8];
+};
+
+static inline int valid_ptec_sector(const unsigned char *data)
+{
+ unsigned char checksum = 0x2a;
+ int i;
+
+ /*
+ * If it looks like a PC/BIOS partition, then it
+ * probably isn't PowerTec.
+ */
+ if (data[510] == 0x55 && data[511] == 0xaa)
+ return 0;
+
+ for (i = 0; i < 511; i++)
+ checksum += data[i];
+
+ return checksum == data[511];
+}
+
/*
* Purpose: allocate ICS partitions.
* Params : hd - pointer to gendisk structure to store partition info.
@@ -363,14 +448,12 @@
* hda2 = ADFS partition 1 on first drive.
* ..etc..
*/
-#ifdef CONFIG_ACORN_PARTITION_POWERTEC
-static int
+int
adfspart_check_POWERTEC(struct parsed_partitions *state, struct block_device *bdev)
{
Sector sect;
- unsigned char *data;
- struct ptec_partition *p;
- unsigned char checksum;
+ const unsigned char *data;
+ const struct ptec_part *p;
int slot = 1;
int i;
@@ -378,17 +461,14 @@
if (!data)
return -1;
- for (checksum = 0x2a, i = 0; i < 511; i++)
- checksum += data[i];
-
- if (checksum != data[511]) {
+ if (!valid_ptec_sector(data)) {
put_dev_sector(sect);
return 0;
}
printk(" [POWERTEC]");
- for (i = 0, p = (struct ptec_partition *)data; i < 12; i++, p++) {
+ for (i = 0, p = (const struct ptec_part *)data; i < 12; i++, p++) {
u32 start = le32_to_cpu(p->start);
u32 size = le32_to_cpu(p->size);
@@ -397,46 +477,81 @@
}
put_dev_sector(sect);
+ printk("\n");
return 1;
}
#endif
-static int (*partfn[])(struct parsed_partitions *, struct block_device *) = {
-#ifdef CONFIG_ACORN_PARTITION_ICS
- adfspart_check_ICS,
-#endif
-#ifdef CONFIG_ACORN_PARTITION_POWERTEC
- adfspart_check_POWERTEC,
-#endif
-#ifdef CONFIG_ACORN_PARTITION_CUMANA
- adfspart_check_CUMANA,
-#endif
-#ifdef CONFIG_ACORN_PARTITION_ADFS
- adfspart_check_ADFS,
-#endif
- NULL
+#ifdef CONFIG_ACORN_PARTITION_EESOX
+struct eesox_part {
+ char magic[6];
+ char name[10];
+ u32 start;
+ u32 unused6;
+ u32 unused7;
+ u32 unused8;
+};
+
+/*
+ * Guess who created this format?
+ */
+static const char eesox_name[] = {
+ 'N', 'e', 'i', 'l', ' ',
+ 'C', 'r', 'i', 't', 'c', 'h', 'e', 'l', 'l', ' ', ' '
};
+
/*
- * Purpose: initialise all the partitions on an ADFS drive.
- * These may be other ADFS partitions or a Linux/RiscBSD/RISCiX
- * partition.
+ * EESOX SCSI partition format.
*
- * Params : hd - pointer to gendisk structure
- * dev - device number to access
+ * This is a goddamned awful partition format. We don't seem to store
+ * the size of the partition in this table, only the start addresses.
*
- * Returns: -1 on error, 0 if not ADFS format, 1 if ok.
+ * There are two possibilities where the size comes from:
+ * 1. The individual ADFS boot block entries that are placed on the disk.
+ * 2. The start address of the next entry.
*/
-int acorn_partition(struct parsed_partitions *state, struct block_device *bdev)
+int
+adfspart_check_EESOX(struct parsed_partitions *state, struct block_device *bdev)
{
- int i;
+ Sector sect;
+ const unsigned char *data;
+ unsigned char buffer[256];
+ struct eesox_part *p;
+ u32 start = 0;
+ int i, slot = 1;
- for (i = 0; partfn[i]; i++) {
- int r = partfn[i](state, bdev);
- if (r) {
- if (r > 0)
- printk("\n");
- return r;
- }
+ data = read_dev_sector(bdev, 7, §);
+ if (!data)
+ return -1;
+
+ /*
+ * "Decrypt" the partition table. God knows why...
+ */
+ for (i = 0; i < 256; i++)
+ buffer[i] = data[i] ^ eesox_name[i & 15];
+
+ put_dev_sector(sect);
+
+ for (i = 0, p = (struct eesox_part *)buffer; i < 8; i++, p++) {
+ u32 next;
+
+ if (memcmp(p->magic, "Eesox", 6))
+ break;
+
+ next = le32_to_cpu(p->start) + first_sector;
+ if (i)
+ put_partition(state, slot++, start, next - start);
+ start = next;
}
- return 0;
+
+ if (i != 0) {
+ unsigned long size;
+
+ size = hd->part[minor(to_kdev_t(bdev->bd_dev))].nr_sects;
+ add_gd_partition(hd, minor++, start, size - start);
+ printk("\n");
+ }
+
+ return i ? 1 : 0;
}
+#endif
--- orig/fs/partitions/acorn.h Thu Jul 25 20:13:49 2002
+++ linux/fs/partitions/acorn.h Thu Jul 25 20:19:05 2002
@@ -1,53 +1,14 @@
/*
- * fs/partitions/acorn.h
+ * linux/fs/partitions/acorn.h
*
- * Copyright (C) 1996-1998 Russell King
- */
-#include <linux/adfs_fs.h>
-
-/*
- * Partition types. (Oh for reusability)
+ * Copyright (C) 1996-2001 Russell King.
+ *
+ * I _hate_ this partitioning mess - why can't we have one defined
+ * format, and everyone stick to it?
*/
-#define PARTITION_RISCIX_MFM 1
-#define PARTITION_RISCIX_SCSI 2
-#define PARTITION_LINUX 9
-
-struct riscix_part {
- __u32 start;
- __u32 length;
- __u32 one;
- char name[16];
-};
-
-struct riscix_record {
- __u32 magic;
-#define RISCIX_MAGIC (0x4a657320)
- __u32 date;
- struct riscix_part part[8];
-};
-
-#define LINUX_NATIVE_MAGIC 0xdeafa1de
-#define LINUX_SWAP_MAGIC 0xdeafab1e
-
-struct linux_part {
- __u32 magic;
- __u32 start_sect;
- __u32 nr_sects;
-};
-
-struct ics_part {
- __u32 start;
- __s32 size;
-};
-
-struct ptec_partition {
- __u32 unused1;
- __u32 unused2;
- __u32 start;
- __u32 size;
- __u32 unused5;
- char type[8];
-};
-
-int acorn_partition(struct parsed_partitions *state, struct block_device *bdev);
+int adfspart_check_CUMANA(struct parsed_partitions *state, struct block_device *bdev);
+int adfspart_check_ADFS(struct parsed_partitions *state, struct block_device *bdev);
+int adfspart_check_ICS(struct parsed_partitions *state, struct block_device *bdev);
+int adfspart_check_POWERTEC(struct parsed_partitions *state, struct block_device *bdev);
+int adfspart_check_EESOX(struct parsed_partitions *state, struct block_device *bdev);
--- orig/fs/partitions/check.c Tue May 27 10:05:28 2003
+++ linux/fs/partitions/check.c Wed May 28 15:18:52 2003
@@ -45,9 +45,33 @@
int warn_no_part = 1; /*This is ugly: should make genhd removable media aware*/
static int (*check_part[])(struct parsed_partitions *, struct block_device *) = {
-#ifdef CONFIG_ACORN_PARTITION
- acorn_partition,
+ /*
+ * Probe partition formats with tables at disk address 0
+ * that also have an ADFS boot block at 0xdc0.
+ */
+#ifdef CONFIG_ACORN_PARTITION_ICS
+ adfspart_check_ICS,
#endif
+#ifdef CONFIG_ACORN_PARTITION_POWERTEC
+ adfspart_check_POWERTEC,
+#endif
+#ifdef CONFIG_ACORN_PARTITION_EESOX
+ adfspart_check_EESOX,
+#endif
+
+ /*
+ * Now move on to formats that only have partition info at
+ * disk address 0xdc0. Since these may also have stale
+ * PC/BIOS partition tables, they need to come before
+ * the msdos entry.
+ */
+#ifdef CONFIG_ACORN_PARTITION_CUMANA
+ adfspart_check_CUMANA,
+#endif
+#ifdef CONFIG_ACORN_PARTITION_ADFS
+ adfspart_check_ADFS,
+#endif
+
#ifdef CONFIG_EFI_PARTITION
efi_partition, /* this must come before msdos */
#endif
--
Russell King (rmk@arm.linux.org.uk) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/