Call Trace:
[<c010cb90>] handle_IRQ_event+0x90/0x100
[<c010cdd1>] do_IRQ+0x91/0x120
[<c790f9c0>] +0x0/0x18 [sonypi]
[<c790f9ec>] sonypi_type1_irq_list+0x0/0x10 [sonypi]
[<c010b388>] common_interrupt+0x18/0x20
[<c790f9c0>] +0x0/0x18 [sonypi]
[<c790f9ec>] sonypi_type1_irq_list+0x0/0x10 [sonypi]
[<c790c409>] sonypi_call2+0x29/0xf0 [sonypi]
[<c790d54e>] sonypi_probe+0x13e/0x460 [sonypi]
[<c790da96>] +0x2a/0xb4 [sonypi]
[<c790c8d0>] sonypi_irq+0x0/0x2a0 [sonypi]
[<c790fd00>] +0x0/0x200 [sonypi]
[<c030206f>] pci_find_device+0x2f/0x40
[<c790fd00>] +0x0/0x200 [sonypi]
[<c78fe030>] +0x30/0x3b [sonypi]
[<c013509f>] sys_init_module+0xff/0x210
[<c790fd00>] +0x0/0x200 [sonypi]
[<c010b21b>] syscall_call+0x7/0xb
handlers:
[<c790c8d0>] (sonypi_irq+0x0/0x2a0 [sonypi])
sonypi: Sony Programmable I/O Controller Driver v1.18.
sonypi: detected type1 model, verbose = 0, fnkeyinit = off, camera =
off, compat = off, ma
sk = 0xffffffff, useinput = on
sonypi: enabled at irq=11, port1=0x10c0, port2=0x10c4
sonypi: device allocated minor is 63
irq 11: nobody cared!
Call Trace:
[<c010cb90>] handle_IRQ_event+0x90/0x100
[<c010cdd1>] do_IRQ+0x91/0x120
[<c0105000>] _stext+0x0/0x60
[<c010b388>] common_interrupt+0x18/0x20
[<c0105000>] _stext+0x0/0x60
[<c0320014>] acpi_processor_idle+0xd4/0x1d0
[<c031ff40>] acpi_processor_idle+0x0/0x1d0
[<c031ff40>] acpi_processor_idle+0x0/0x1d0
[<c0105000>] _stext+0x0/0x60
[<c01090e9>] cpu_idle+0x39/0x50
[<c066c718>] start_kernel+0x148/0x150
[<c066c480>] unknown_bootoption+0x0/0x120
handlers:
[<c790c8d0>] (sonypi_irq+0x0/0x2a0 [sonypi])
Sony VAIO Jog Dial installed.
Linux video capture interface: v1.00
meye: using 2 buffers with 600k (1200k total) for capture
meye: Motion Eye Camera Driver v1.6.
meye: mchip KL5A72002 rev. 1, base fc00d800, irq 9
but they seem to work fine :]
-- Grzegorz Jaskiewicz <gj@pointblue.com.pl> K4 labs- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/