This patch updates Kconfig accordingly, so people
reading the help texts are told to look at
<file:drivers/ide/pci/sis5513.c>
instead of the nonexistant
<file:drivers/ide/sis5513.c>
There are similiar updated for the other ide drivers.
Helge Hafting
--- Kconfig.orig 2003-05-05 01:53:14.000000000 +0200
+++ Kconfig 2003-05-13 11:18:19.000000000 +0200
@@ -456,7 +456,7 @@
If you say Y here, you also need to say Y to "Use DMA by default
when available", above. Please read the comments at the top of
- <file:drivers/ide/alim15x3.c>.
+ <file:drivers/ide/pci/alim15x3.c>.
If unsure, say N.
@@ -543,7 +543,7 @@
depends on BLK_DEV_HPT34X && IDEDMA_PCI_WIP
help
This is a dangerous thing to attempt currently! Please read the
- comments at the top of <file:drivers/ide/hpt34x.c>. If you say Y
+ comments at the top of <file:drivers/ide/pci/hpt34x.c>. If
you say Y
here, then say Y to "Use DMA by default when available" as well.
If unsure, say N.
@@ -605,14 +605,14 @@
This driver adds detection and support for the NS87415 chip
(used in SPARC64, among others).
- Please read the comments at the top of
<file:drivers/ide/ns87415.c>.
+ Please read the comments at the top of
<file:drivers/ide/pci/ns87415.c>.
config BLK_DEV_OPTI621
tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)"
depends on PCI && BLK_DEV_IDEPCI && EXPERIMENTAL
help
This is a driver for the OPTi 82C621 EIDE controller.
- Please read the comments at the top of
<file:drivers/ide/opti621.c>.
+ Please read the comments at the top of
<file:drivers/ide/pci/opti621.c>.
config BLK_DEV_PDC202XX_OLD
tristate "PROMISE PDC202{46|62|65|67} support"
@@ -631,7 +631,8 @@
when the PDC20265 BIOS has been disabled (for faster boot up).
Please read the comments at the top of
- <file:drivers/ide/pdc202xx.c>.
+ <file:drivers/ide/pci/pdc202xx_old.c>, and
+ <file:drivers/ide/pci/pdc202xx_new.c>.
If unsure, say N.
@@ -689,7 +690,7 @@
If you say Y here, you need to say Y to "Use DMA by default when
available" as well.
- Please read the comments at the top of
<file:drivers/ide/sis5513.c>.
+ Please read the comments at the top of
<file:drivers/ide/pci/sis5513.c>.
config BLK_DEV_SLC90E66
tristate "SLC90E66 chipset support"
@@ -705,7 +706,7 @@
available" as well.
Please read the comments at the top of
- drivers/ide/slc90e66.c.
+ <file:drivers/ide/pci/slc90e66.c>.
config BLK_DEV_TRM290
tristate "Tekram TRM290 chipset support"
@@ -714,7 +715,7 @@
This driver adds support for bus master DMA transfers
using the Tekram TRM290 PCI IDE chip. Volunteers are
needed for further tweaking and development.
- Please read the comments at the top of
<file:drivers/ide/trm290.c>.
+ Please read the comments at the top of
<file:drivers/ide/pci/trm290.c>.
config BLK_DEV_VIA82CXXX
tristate "VIA82CXXX chipset support"
@@ -945,7 +946,7 @@
boot parameter. It enables support for the secondary IDE
interface
of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
I/O speeds to be set as well. See the files
- <file:Documentation/ide.txt> and <file:drivers/ide/ali14xx.c> for
+ <file:Documentation/ide.txt> and
<file:drivers/ide/legacy/ali14xx.c> for
more info.
config BLK_DEV_DTC2278
@@ -956,7 +957,7 @@
boot parameter. It enables support for the secondary IDE
interface
of the DTC-2278 card, and permits faster I/O speeds to be set as
well. See the <file:Documentation/ide.txt> and
- <file:drivers/ide/dtc2278.c> files for more info.
+ <file:drivers/ide/legacy/dtc2278.c> files for more info.
config BLK_DEV_HT6560B
tristate "Holtek HT6560B support"
@@ -966,7 +967,7 @@
boot parameter. It enables support for the secondary IDE
interface
of the Holtek card, and permits faster I/O speeds to be set
as well.
See the <file:Documentation/ide.txt> and
- <file:drivers/ide/ht6560b.c> files for more info.
+ <file:drivers/ide/legacy/ht6560b.c> files for more info.
config BLK_DEV_PDC4030
tristate "PROMISE DC4030 support (EXPERIMENTAL)"
@@ -979,7 +980,7 @@
supported (and probably never will be since I don't think the
cards
support them). This driver is enabled at runtime using the
"ide0=dc4030"
or "ide1=dc4030" kernel boot parameter. See the
- <file:drivers/ide/pdc4030.c> file for more info.
+ <file:drivers/ide/legacy/pdc4030.c> file for more info.
config BLK_DEV_QD65XX
tristate "QDI QD65xx support"
@@ -987,7 +988,7 @@
help
This driver is enabled at runtime using the "ide0=qd65xx" kernel
boot parameter. It permits faster I/O speeds to be set. See the
- <file:Documentation/ide.txt> and <file:drivers/ide/qd65xx.c> for
+ <file:Documentation/ide.txt> and
<file:drivers/ide/legacy/qd65xx.c> for
more info.
config BLK_DEV_UMC8672
@@ -998,7 +999,7 @@
boot parameter. It enables support for the secondary IDE
interface
of the UMC-8672, and permits faster I/O speeds to be set as well.
See the files <file:Documentation/ide.txt> and
- <file:drivers/ide/umc8672.c> for more info.
+ <file:drivers/ide/legacy/umc8672.c> for more info.
config BLK_DEV_HD_ONLY
bool "Old hard disk (MFM/RLL/IDE) driver"
@@ -1067,7 +1068,8 @@
available" as well.
Please read the comments at the top of
- <file:drivers/ide/pdc202xx.c>.
+ <file:drivers/ide/pci/pdc202xx_old.c>, and
+ <file:drivers/ide/pci/pdc202xx_new.c>.
If unsure, say N.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/