Re: 2.5.69: Tyans S2460 hang with i2c

Heinz Ulrich Stille (hus@design-d.de)
Tue, 6 May 2003 11:22:58 +0200

On Monday 05 May 2003 20:28, Greg KH wrote:
> If after doing that, it says you have the adm1021 and lm75 chips and
> they work properly on 2.4, please let me know and I'll try to track down
> what's changed on 2.5.

The Tiger MP and MPX need (apart from i2c-dev) w83781d and i2c-amd756.
I'm using kernel 2.4.20 with the lm_sensors modules; the w83781d needs
a special patch (to recognize two subclients, iirc). The proper init
sequence is:
modprobe i2c-dev
modprobe w83781d init=0 force_subclients=0,0x2c,0x4a,0x4b \
motherboard=tyan_s246x
modprobe i2c-amd756

Up till now I've had no luck with kernel 2.5.x, not that I've really tried.
Among other problems, I didn't get lm_sensors to compile. This may be fixed
by now, but I'm happy with 2.4.20 and haven't got too much time.

MfG, Ulrich

-- 
Heinz Ulrich Stille / Tel.: +49-541-9400463 / Fax: +49-541-9400450
design_d gmbh / Lortzingstr. 2 / 49074 Osnabrück / www.design-d.de


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/