--=_courier-22430-1051251903-0001-2
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi,
after some time rc1 always freezes on my system.
I tried it three times:
1. I was running lopster under X. When I came home from work
my screen told me "no input signal".
2. I ripped a cd using cdparanoia and oggenc under X.
After some time (1/2 hour maybe) the system freezed.
3. Same disc on a tty -> The next morning I had a black screen.
(this time with apm and acpi disabled).
My /var/log/boot.msg is attached, if you need further
information just ask (I don't want to flood the list with
my .config. if you don't need it).
BTW: I could find nothing interesting in /var/log/messages and
/var/log/warn
-- BOFH excuse of the day: Quantum dynamics are affecting the transistors--=_courier-22430-1051251903-0001-2 Content-Type: text/plain; name="boot.msg"; charset=iso-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="boot.msg"
Cannot find map file. Loaded 124 symbols from 10 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.21-rc1 (root@linux) (gcc version 3.2) #4 Thu Apr 24 06:45:57 CEST 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009e800 (usable) <4> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 0000000007ffc000 (usable) <4> BIOS-e820: 0000000007ffc000 - 0000000007fff000 (ACPI data) <4> BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <5>0MB HIGHMEM available. <5>127MB LOWMEM available. <4>On node 0 totalpages: 32764 <4>zone(0): 4096 pages. <4>zone(1): 28668 pages. <4>zone(2): 0 pages. <4>Kernel command line: auto BOOT_IMAGE=2_4_21-rc1 ro hdh=ide-scsi <6>ide_setup: hdh=ide-scsi <4>No local APIC present or hardware disabled <6>Initializing CPU#0 <4>Detected 501.132 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 999.42 BogoMIPS <6>Memory: 126304k/131056k available (1482k kernel code, 4360k reserved, 535k data, 128k init, 0k highmem) <6>Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) <6>Inode cache hash table entries: 8192 (order: 4, 65536 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) <4>Page-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) <6>CPU: L2 Cache: 128K (32 bytes/line) <7>CPU: After generic, caps: 008021bf c08029bf 00000000 00000002 <7>CPU: Common caps: 008021bf c08029bf 00000000 00000002 <4>CPU: AMD-K6(tm)-III Processor stepping 04 <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: AMD K6 <6>PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1 <6>PCI: Using configuration type 1 <6>PCI: Probing PCI hardware <6>PCI: Using IRQ router ALI [10b9/1533] at 00:07.0 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) <4>Starting kswapd <5>VFS: Diskquotas version dquot_6.4.0 initialized <6>Journalled Block Device driver loaded <5>ACPI: APM is already active, exiting <6>vesafb: framebuffer at 0xe7000000, mapped to 0xc880d000, size 16128k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=8 <6>vesafb: protected mode interface info at c000:0444 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <4>Console: switching to colour frame buffer device 128x48 <6>fb0: VESA VGA frame buffer device <6>Detected PS/2 Mouse Port. <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 8 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>PDC20269: IDE controller at PCI slot 00:0c.0 <6>PCI: Found IRQ 11 for device 00:0c.0 <6>PDC20269: chipset revision 2 <6>PDC20269: not 100%% native mode: will probe irqs later <6> ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:pio, hdb:pio <6> ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:pio, hdd:pio <6>ALI15X3: IDE controller at PCI slot 00:0f.0 <6>ALI15X3: chipset revision 193 <6>ALI15X3: not 100%% native mode: will probe irqs later <6> ide2: BM-DMA at 0xa000-0xa007, BIOS settings: hde:DMA, hdf:DMA <6> ide3: BM-DMA at 0xa008-0xa00f, BIOS settings: hdg:DMA, hdh:pio <4>hda: IC35L120AVV207-0, ATA DISK drive <4>blk: queue c0349f60, I/O limit 4095Mb (mask 0xffffffff) <4>hdc: IC35L120AVV207-0, ATA DISK drive <4>blk: queue c034a3b0, I/O limit 4095Mb (mask 0xffffffff) <4>hde: Maxtor 4G120J6, ATA DISK drive <4>hdf: IBM-DJNA-352030, ATA DISK drive <4>blk: queue c034a800, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c034a93c, I/O limit 4095Mb (mask 0xffffffff) <4>hdg: IC35L120AVV207-0, ATA DISK drive <4>hdh: R/RW 8x4x32, ATAPI CD/DVD-ROM drive <4>blk: queue c034ac50, I/O limit 4095Mb (mask 0xffffffff) <4>ide0 at 0xb800-0xb807,0xb402 on irq 11 <4>ide1 at 0xb000-0xb007,0xa802 on irq 11 <4>ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide3 at 0x170-0x177,0x376 on irq 15 <4>hda: attached ide-disk driver. <4>hda: host protected area => 1 <6>hda: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=15017/255/63, UDMA(100) <4>hdc: attached ide-disk driver. <4>hdc: host protected area => 1 <6>hdc: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=15017/255/63, UDMA(100) <4>hde: attached ide-disk driver. <4>hde: host protected area => 1 <6>hde: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(33) <4>hdf: attached ide-disk driver. <4>hdf: host protected area => 1 <6>hdf: 39876480 sectors (20417 MB) w/1966KiB Cache, CHS=2482/255/63, UDMA(33) <4>hdg: attached ide-disk driver. <4>hdg: host protected area => 1 <6>hdg: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=15017/255/63, UDMA(33) <6>ide-floppy driver 0.99.newide <6>Partition check: <6> hda: hda1 <6> hdc: hdc1 <6> hde: hde1 hde2 hde3 hde4 <6> hdf: hdf1 <6> hdg: hdg1 <6>ide-floppy driver 0.99.newide <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6> [events: 00000057] <6> [events: 00000057] <6> [events: 00000057] <6>md: autorun ... <6>md: considering hdg1 ... <6>md: adding hdg1 ... <6>md: adding hdc1 ... <6>md: adding hda1 ... <6>md: created md0 <6>md: bind<hda1,1> <6>md: bind<hdc1,2> <6>md: bind<hdg1,3> <6>md: running: <hdg1><hdc1><hda1> <6>md: hdg1's event counter: 00000057 <6>md: hdc1's event counter: 00000057 <6>md: hda1's event counter: 00000057 <3>md: md0: raid array is not clean -- starting background reconstruction <3>kmod: failed to exec /sbin/modprobe -s -k md-personality-4, errno = 2 <3>md: personality 4 is not loaded! <4>md :do_md_run() returned -22 <6>md: md0 stopped. <6>md: unbind<hdg1,2> <6>md: export_rdev(hdg1) <6>md: unbind<hdc1,1> <6>md: export_rdev(hdc1) <6>md: unbind<hda1,0> <6>md: export_rdev(hda1) <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 512 buckets, 4Kbytes <6>TCP: Hash tables configured (established 8192 bind 16384) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 375k freed <4>VFS: Mounted root (ext2 filesystem). <6>PCI: Found IRQ 9 for device 00:09.0 <6>ncr53c8xx: at PCI bus 0, device 9, function 0 <6>ncr53c8xx: 53c875 detected with Symbios NVRAM <6>ncr53c875-0: rev 0x26 on pci bus 0 device 9 function 0 irq 9 <6>ncr53c875-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking <6>ncr53c875-0: on-chip RAM at 0xdd800000 <6>ncr53c875-0: restart (scsi reset). <4>ncr53c875-0: Downloading SCSI SCRIPTS. <6>scsi0 : ncr53c8xx-3.4.3b-20010512 <6>raid5: measuring checksumming speed <4> 8regs : 768.800 MB/sec <4> 32regs : 501.600 MB/sec <4> pII_mmx : 1074.000 MB/sec <4> p5_mmx : 1077.200 MB/sec <4>raid5: using function: p5_mmx (1077.200 MB/sec) <6>md: raid5 personality registered as nr 4 <4>hdh: attached ide-scsi driver. <6>scsi1 : SCSI host adapter emulation for IDE ATAPI devices <4> Vendor: IDE-CD Model: R/RW 8x4x32 Rev: 1.5 <4> Type: CD-ROM ANSI SCSI revision: 02 <6>md: Autodetecting RAID arrays. <6> [events: 00000057] <6> [events: 00000057] <6> [events: 00000057] <6>md: autorun ... <6>md: considering hda1 ... <6>md: adding hda1 ... <6>md: adding hdc1 ... <6>md: adding hdg1 ... <6>md: created md0 <6>md: bind<hdg1,1> <6>md: bind<hdc1,2> <6>md: bind<hda1,3> <6>md: running: <hda1><hdc1><hdg1> <6>md: hda1's event counter: 00000057 <6>md: hdc1's event counter: 00000057 <6>md: hdg1's event counter: 00000057 <3>md: md0: raid array is not clean -- starting background reconstruction <6>md0: max total readahead window set to 1024k <6>md0: 2 data-disks, max readahead per data-disk: 512k <6>raid5: device hda1 operational as raid disk 0 <6>raid5: device hdc1 operational as raid disk 2 <6>raid5: device hdg1 operational as raid disk 1 <6>raid5: allocated 3284kB for md0 <4>raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2 <4>raid5: raid set md0 not clean; reconstructing parity <4>RAID5 conf printout: <4> --- rd:3 wd:3 fd:0 <4> disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hda1 <4> disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdg1 <4> disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hdc1 <4>RAID5 conf printout: <4> --- rd:3 wd:3 fd:0 <4> disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hda1 <4> disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdg1 <4> disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hdc1 <6>md: updating md0 RAID superblock on device <6>md: hda1 [events: 00000058]<6>(write) hda1's sb offset: 120615872 <6>md: syncing RAID array md0 <6>md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc. <6>md: using maximum available idle IO bandwith (but not more than 100000 KB/sec) for reconstruction. <6>md: using 124k window, over a total of 120615808 blocks. <6>md: hdc1 [events: 00000058]<6>(write) hdc1's sb offset: 120615872 <6>md: hdg1 [events: 00000058]<6>(write) hdg1's sb offset: 120615872 <6>md: ... autorun DONE. <4>raid5: switching cache buffer size, 4096 --> 1024 <4>raid5: switching cache buffer size, 1024 --> 4096 <4>raid5: switching cache buffer size, 4096 --> 1024 <4>raid5: switching cache buffer size, 1024 --> 4096 <4>VFS: Mounted root (ext2 filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 128k freed <4>blk: queue c034a800, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c034a93c, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c034ac50, I/O limit 4095Mb (mask 0xffffffff) <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>LVM version 1.0.5+(22/07/2002) module loaded <6>Adding Swap: 530136k swap-space (priority 42) <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,1), internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <4>reiserfs: checking transaction log (device 21:03) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>MSDOS FS: IO charset iso8859-15 Kernel logging (ksyslog) stopped. Kernel log daemon terminating.
--=_courier-22430-1051251903-0001-2--