Steve
Linux video capture interface: v1.00
bttv: driver version 0.9.4 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Host bridge is Advanced Micro Devic AMD-760 MP [IGD4-2P]
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 02:05.0, irq: 17, latency: 132, mmio:
0xf8000000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is
0070:13eb
bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected]
irq event 17: bogus retval mask c0a31
Call Trace:
[<c010d2c5>] handle_IRQ_event+0x85/0x100
[<c010d5a5>] do_IRQ+0xd5/0x1b0
[<c0108970>] default_idle+0x0/0x40
[<c0108970>] default_idle+0x0/0x40
[<c010b858>] <6>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
common_interrupt+0x18/0x20
[<c0108970>] default_idle+0x0/0x40
[<c0108970>] default_idle+0x0/0x40
[<c010899d>] default_idle+0x2d/0x40
[<c0108a2a>] cpu_idle+0x3a/0x50
[<c0123cef>] printk+0x17f/0x1d0
handlers:
[<c02c9e10>] (bttv_irq+0x0/0x2b0)
bttv0: Hauppauge eeprom: model=44801, tuner=Philips FI1236 MK2 (2),
radio=no
bttv0: using tuner=2
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 irq event 17: bogus retval mask c0a31
Call Trace:
[<c010d2c5>] handle_IRQ_event+0x85/0x100
[<c010d5a5>] do_IRQ+0xd5/0x1b0
[<c010b858>] common_interrupt+0x18/0x20
[<c0321095>] vgacon_cursor+0xa5/0x200
[<c028d698>] clear_selection+0x18/0x60
[<c0290462>] set_cursor+0x72/0x90
[<c0293a39>] vt_console_print+0x1e9/0x2f0
[<c0123957>] __call_console_drivers+0x57/0x60
[<c0123a3b>] call_console_drivers+0x5b/0x120
[<c0123de2>] release_console_sem+0x62/0xf0
[<c0123cef>] printk+0x17f/0x1d0
[<c02c52f1>] set_pll+0x101/0x180
[<c02c5396>] bt848A_set_timing+0x26/0x40
[<c02c5869>] set_tvnorm+0x89/0xb0
[<c059a126>] bttv_probe+0x556/0x670
[<c0258f7e>] pci_device_probe+0x5e/0x70
[<c02a7c55>] bus_match+0x45/0x80
[<c02a7d7c>] driver_attach+0x5c/0x70
[<c02a8062>] bus_add_driver+0xd2/0xe0
[<c02590b7>] pci_register_driver+0x47/0x60
[<c02ca163>] bttv_init_module+0x93/0xf0
[<c057c91b>] do_initcalls+0x2b/0xa0
[<c013380f>] init_workqueues+0xf/0x26
[<c01050e7>] init+0x57/0x1f0
[<c0105090>] init+0x0/0x1f0
[<c0108b9d>] kernel_thread_helper+0x5/0x18
handlers:
[<c02c9e10>] (bttv_irq+0x0/0x2b0)
irq event 17: bogus retval mask c0a31
Call Trace:
[<c010d2c5>] handle_IRQ_event+0x85/0x100
[<c010d5a5>] do_IRQ+0xd5/0x1b0
[<c010b858>] common_interrupt+0x18/0x20
[<c025a956>] acpi_os_read_port+0x30/0x45
[<c026601c>] acpi_hw_low_level_read+0xac/0xb4
[<c025fc4f>] acpi_ev_gpe_detect+0x83/0x12b
[<c025e88d>] acpi_ev_sci_xrupt_handler+0x11/0x18
[<c025a826>] acpi_irq+0xc/0x13
[<c010d27e>] handle_IRQ_event+0x3e/0x100
[<c025a81a>] acpi_irq+0x0/0x13
[<c010d5a5>] do_IRQ+0xd5/0x1b0
[<c010b858>] common_interrupt+0x18/0x20
[<c012761d>] do_softirq+0x5d/0xd0
[<c0117bf7>] smp_apic_timer_interrupt+0xd7/0x150
[<c010b8da>] apic_timer_interrupt+0x1a/0x20
[<c0321095>] vgacon_cursor+0xa5/0x200
[<c028d698>] clear_selection+0x18/0x60
[<c0290462>] set_cursor+0x72/0x90
[<c0293a39>] vt_console_print+0x1e9/0x2f0
[<c0123957>] __call_console_drivers+0x57/0x60
[<c0123a3b>] call_console_drivers+0x5b/0x120
[<c0123de2>] release_console_sem+0x62/0xf0
[<c0123cef>] printk+0x17f/0x1d0
[<c02c52f1>] set_pll+0x101/0x180
[<c02c5396>] bt848A_set_timing+0x26/0x40
[<c02c5869>] set_tvnorm+0x89/0xb0
[<c059a126>] bttv_probe+0x556/0x670
[<c0258f7e>] pci_device_probe+0x5e/0x70
[<c02a7c55>] bus_match+0x45/0x80
[<c02a7d7c>] driver_attach+0x5c/0x70
[<c02a8062>] bus_add_driver+0xd2/0xe0
[<c02590b7>] pci_register_driver+0x47/0x60
[<c02ca163>] bttv_init_module+0x93/0xf0
[<c057c91b>] do_initcalls+0x2b/0xa0
[<c013380f>] init_workqueues+0xf/0x26
[<c01050e7>] init+0x57/0x1f0
[<c0105090>] init+0x0/0x1f0
[<c0108b9d>] kernel_thread_helper+0x5/0x18
handlers:
[<c02c9e10>] (bttv_irq+0x0/0x2b0)
.. ok
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea642
0,tda8425,pic16c54 (PV951)
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
bttv0: i2c attach [client=Philips NTSC (FI1236,FM1236 and
compatibles),ok]
registering 0-0061
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/