(1) the chipset drivers need a depency on CONFIG_BLK_DEV_IDE, otherwise
you can select them builin with modular ide.
(2) CONFIG_BLK_DEV_IDE and CONFIG_BLK_DEV_IDE are bools, so with the
standard Makefile logical they'll get built into the kernel for
modular ide, change the makefile logic a bit for this.
--- 1.26/drivers/ide/Config.in Tue Mar 11 14:29:21 2003
+++ edited/drivers/ide/Config.in Wed Apr 23 17:02:53 2003
@@ -43,40 +43,42 @@
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' ATA Work(s) In Progress (EXPERIMENTAL)' CONFIG_IDEDMA_PCI_WIP $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
# dep_bool ' Good-Bad DMA Model-Firmware (WIP)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS $CONFIG_IDEDMA_PCI_WIP
- dep_tristate ' Pacific Digital ADMA-100 basic support' CONFIG_BLK_DEV_ADMA100
- dep_tristate ' AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_tristate ' Pacific Digital ADMA-100 basic support' CONFIG_BLK_DEV_ADMA100 $CONFIG_BLK_DEV_IDE
+ dep_tristate ' AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
dep_mbool ' ALI M15x3 WDC support (DANGEROUS)' CONFIG_WDC_ALI15X3 $CONFIG_BLK_DEV_ALI15X3
- dep_tristate ' AMD Viper support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_mbool ' AMD Viper ATA-66 Override' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX
- dep_tristate ' CMD64{3|6|8|9} chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' Compaq Triflex IDE support' CONFIG_BLK_DEV_TRIFLEX $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
+
+ dep_tristate ' AMD Viper support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_IDE
+
+ dep_mbool ' AMD Viper ATA-66 Override' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX $CONFIG_IDE
+ dep_tristate ' CMD64{3|6|8|9} chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' Compaq Triflex IDE support' CONFIG_BLK_DEV_TRIFLEX $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
dep_mbool ' HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
- dep_tristate ' HPT36X/37X chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_tristate ' HPT36X/37X chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then
dep_mbool ' IT8172 IDE support' CONFIG_BLK_DEV_IT8172 $CONFIG_BLK_DEV_IDEDMA_PCI
fi
- dep_tristate ' NS87415 chipset support' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621 $CONFIG_EXPERIMENTAL
- dep_tristate ' PROMISE PDC202{46|62|65|67} support' CONFIG_BLK_DEV_PDC202XX_OLD $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_tristate ' NS87415 chipset support' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621 $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_IDE
+ dep_tristate ' PROMISE PDC202{46|62|65|67} support' CONFIG_BLK_DEV_PDC202XX_OLD $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
dep_bool ' Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX_OLD $CONFI_BLK_DEV_IDEDMA_PCI
- dep_tristate ' PROMISE PDC202{68|69|70|71|75|76|77} support' CONFIG_BLK_DEV_PDC202XX_NEW $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_tristate ' PROMISE PDC202{68|69|70|71|75|76|77} support' CONFIG_BLK_DEV_PDC202XX_NEW $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
# FIXME - probably wants to be one for old and for new
dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX_NEW
- dep_tristate ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86
- dep_tristate ' SCx200 chipset support' CONFIG_BLK_DEV_SC1200 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' ServerWorks OSB4/CSB5/CSB6 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' Silicon Image chipset support' CONFIG_BLK_DEV_SIIMAGE $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
- dep_tristate ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' Tekram TRM290 chipset support' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_tristate ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86 $CONFIG_BLK_DEV_IDE
+ dep_tristate ' SCx200 chipset support' CONFIG_BLK_DEV_SC1200 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' ServerWorks OSB4/CSB5/CSB6 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' Silicon Image chipset support' CONFIG_BLK_DEV_SIIMAGE $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86 $CONFIG_BLK_DEV_IDE
+ dep_tristate ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' Tekram TRM290 chipset support' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then
- dep_tristate ' Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105 $CONFIG_BLK_DEV_IDEPCI
+ dep_tristate ' Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105 $CONFIG_BLK_DEV_IDEPCI $CONFIG_BLK_DEV_IDE
fi
fi
fi
--- 1.11/drivers/ide/Makefile Mon Mar 24 13:04:35 2003
+++ edited/drivers/ide/Makefile Wed Apr 23 17:03:34 2003
@@ -35,8 +35,12 @@
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
-obj-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
-obj-$(CONFIG_BLK_DEV_IDEDMA_PCI) += ide-dma.o
+ifeq ($(CONFIG_BLK_DEV_IDEPCI),y)
+obj-$(CONFIG_BLK_DEV_IDE) += setup-pci.o
+endif
+ifeq ($(CONFIG_BLK_DEV_IDEDMA_PCI),y)
+obj-$(CONFIG_BLK_DEV_IDE) += ide-dma.o
+endif
obj-$(CONFIG_BLK_DEV_ISAPNP) += ide-pnp.o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/