anticipatory scheduling elevator
(scsi0:A:3): 5.000MB/s transfers (5.000MHz, offset 15)
(scsi0:A:5): 4.032MB/s transfers (4.032MHz, offset 15)
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
Vendor: DEC Model: DLT2000 Rev: 830A
Type: Sequential-Access ANSI SCSI revision: 02
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
Vendor: TOSHIBA Model: CD-ROM XM-5401TA Rev: 3605
Type: CD-ROM ANSI SCSI revision: 02
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.31
<Adaptec aic7870 SCSI adapter>
aic7870: Wide Channel A, SCSI Id=7, 16/253 SCBs
anticipatory scheduling elevator
(scsi1:A:0): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
(scsi1:A:1): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
(scsi1:A:2): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
(scsi1:A:3): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
(scsi1:A:4): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
(scsi1:A:5): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: SEAGATE Model: ST15150W Rev: 9103
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:0:0: Tagged Queuing enabled. Depth 32
anticipatory scheduling elevator
anticipatory scheduling elevator
Vendor: SEAGATE Model: ST15150W Rev: 9103
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:1:0: Tagged Queuing enabled. Depth 32
anticipatory scheduling elevator
anticipatory scheduling elevator
Vendor: SEAGATE Model: ST15150W Rev: 9103
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:2:0: Tagged Queuing enabled. Depth 32
anticipatory scheduling elevator
anticipatory scheduling elevator
Vendor: SEAGATE Model: ST15150W Rev: 9103
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:3:0: Tagged Queuing enabled. Depth 32
anticipatory scheduling elevator
anticipatory scheduling elevator
Vendor: SEAGATE Model: ST15150W Rev: 9103
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:4:0: Tagged Queuing enabled. Depth 32
anticipatory scheduling elevator
anticipatory scheduling elevator
Vendor: SEAGATE Model: ST15150W Rev: 9103
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:5:0: Tagged Queuing enabled. Depth 32
<snip>
Bringing up interface eth0: ext3_abort called.
EXT3-fs abort (device sd(8,1)): ext3_journal_start: Detected aborted
journal
Remounting filesystem read-only
Unable to handle kernel paging request at virtual address 6b6b6b6f
*pde = 00000000
Oops: 0000 [#1]
CPU: 2
EIP: 0060:[<c01281bd>] Not tainted
EFLAGS: 00010046
EIP is at mod_timer+0xcd/0x2a0
eax: 00000002 ebx: 6b6b6b6b ecx: cbf7e000 edx: 00c71b80
esi: c11e7fc0 edi: c151c770 ebp: c151c77c esp: cbf7de28
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=cbf7c000 task=c14fcc80)
Stack: 00000000 00000016 00000270 11df8340 c1528000 c1528000 c02e4196 cc81104c
c0468380 c1604000 cbdf4440 c1528000 cbdf8340 c02da87a c151c770 0025be3e
c0533dc8 c0533920 00000000 c1523800 c1523800 c1523900 00000007 00000000
Call Trace:
[<c02e4196>] ahc_qinfifo_requeue_tail+0xd6/0xe0
[<c02da87a>] ahc_handle_seqint+0x1a3a/0x1b70
[<c02f6522>] ahc_linux_isr+0x2c2/0x370
[<c010b94d>] handle_IRQ_event+0x2d/0x50
[<c010bc1b>] do_IRQ+0xfb/0x1d0
[<c010a208>] common_interrupt+0x18/0x20
[<c01247ed>] do_softirq+0x5d/0xd0
[<c0115fe5>] smp_apic_timer_interrupt+0xe5/0x150
[<c0106eb0>] default_idle+0x0/0x40
[<c010a28a>] apic_timer_interrupt+0x1a/0x20
[<c0106eb0>] default_idle+0x0/0x40
[<c0106ede>] default_idle+0x2e/0x40
[<c0106f6a>] cpu_idle+0x3a/0x50
[<c0120cb7>] printk+0x1b7/0x230
[<c054092b>] print_cpu_info+0x7b/0xd0
Code: 81 7b 04 ad 4e ad de 74 19 68 b4 81 12 c0 68 37 70 41 c0 e8
NMI Watchdog detected LOCKUP on CPU2, eip c01290b7, registers:
CPU: 2
EIP: 0060:[<c01290b7>] Not tainted
EFLAGS: 00000086
EIP is at .text.lock.timer+0x5a/0x93
eax: 00000002 ebx: 00000000 ecx: 00000000 edx: 00c71b80
esi: c11e7fc0 edi: c059be00 ebp: c059be0c esp: cbf7dcc4
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=cbf7c000 task=c14fcc80)
Stack: 00000000 00000093 0000c530 ffffffff 0000c52f 00000046 c0120e11 0000c52f
00000096 00000000 00000000 c14fcc80 6b6b6b6f c026c7e5 c059be00 0049ecd4
0000000f c0119375 cbf7ddf4 c010a8d8 00000000 c042694e c0417cc8 c041ddce
Call Trace:
[<c0120e11>] release_console_sem+0x91/0x120
[<c026c7e5>] unblank_screen+0xb5/0xe0
[<c0119375>] bust_spinlocks+0x25/0x50
[<c010a8d8>] die+0x88/0x110
[<c01195fd>] do_page_fault+0x25d/0x46a
[<c011bcb9>] __wake_up+0x49/0x80
[<c01209e5>] call_console_drivers+0x55/0x100
[<c0120e11>] release_console_sem+0x91/0x120
[<c0120cb7>] printk+0x1b7/0x230
[<c01193a0>] do_page_fault+0x0/0x46a
[<c010a32d>] error_code+0x2d/0x40
[<c01281bd>] mod_timer+0xcd/0x2a0
[<c02e4196>] ahc_qinfifo_requeue_tail+0xd6/0xe0
[<c02da87a>] ahc_handle_seqint+0x1a3a/0x1b70
[<c02f6522>] ahc_linux_isr+0x2c2/0x370
[<c010b94d>] handle_IRQ_event+0x2d/0x50
[<c010bc1b>] do_IRQ+0xfb/0x1d0
[<c010a208>] common_interrupt+0x18/0x20
[<c01247ed>] do_softirq+0x5d/0xd0
[<c0115fe5>] smp_apic_timer_interrupt+0xe5/0x150
[<c0106eb0>] default_idle+0x0/0x40
[<c010a28a>] apic_timer_interrupt+0x1a/0x20
[<c0106eb0>] default_idle+0x0/0x40
[<c0106ede>] default_idle+0x2e/0x40
[<c0106f6a>] cpu_idle+0x3a/0x50
[<c0120cb7>] printk+0x1b7/0x230
[<c054092b>] print_cpu_info+0x7b/0xd0
Code: 7e f9 e9 a2 f2 ff ff f3 90 80 3b 00 7e f9 e9 18 f3 ff ff f3
console shuts up ...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/