Re: Driver for Netgear FA120 USB2 ethernet

[Måns Rullgård]

[e-mail] (Måns Rullgård) writes:

> Is there any chance to get a linux driver for a Netgear FA120 USB2
> ethernet adaptor?  It's got two chips inside.  One is a Realtek
> RTL8201BL and the other an ASIX AX88172.
> 
> /proc/bus/usb/devices:
> 
> T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
> D:  Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=0846 ProdID=1040 Rev= 0.01
> S:  Manufacturer=NETGEAR
> S:  Product=NETGEAR FA120 Adapter
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=300mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=128ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Documentation is available:

http://www.asix.com.tw/datasheet/mac/Ax88172.PDF
ftp://152.104.125.40/cn/phy/rtl8201bl/spec-8201bl(120).pdf

Is anyone working on it, or should I do it?  Not that I know how...

-- 
Måns Rullgård
[e-mail]