> All it is an aborted command.
> just a nuisanse and noise maker!
OK. But can you please explain a bit more what is happening ?
Why is the command aborted ?
I get a similar error when inserting a PCMCIA CompactFlash adapter
in my RH 9 laptop (RH kernel 2.4.20-9):
hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: task_no_data_intr: error=0x00 { }
Besides the kernel error the machine completely freezes for 20 seconds.
(See https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=88411 )
greetings,
Rob van Nieuwkerk
> On Thu, 10 Apr 2003, Michael Frank wrote:
>
> > Noticed this for some time in 2.5.64 and up, and now also in 2.4.21-pre6 and pre7. It was OK 2.4.20. No functional problems were encountered with 2.4.21, 2.5.6x so far.
> >
> > Its a P1, lspci follows
> >
> > 00:00.0 Host bridge: Intel Corp. 430HX - 82439HX TXC [Triton II] (rev 03)
> > 00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01)
> > 00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
> > 00:09.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01)
> > 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
> > 00:0b.0 SCSI storage controller: Adaptec AHA-7850 (rev 01)
> >
> >
> > Apr 10 15:17:30 mhfl1 kernel: Linux version 2.4.21-pre7-mhf18-np (mhf@mhfl3) (gcc version 2.95.3 20010315 (release)) #2
> >
> > Apr 10 15:12:42 mhfl1 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
> > Apr 10 15:12:42 mhfl1 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > Apr 10 15:12:42 mhfl1 kernel: PIIX3: IDE controller at PCI slot 00:07.1
> > Apr 10 15:12:42 mhfl1 kernel: PIIX3: chipset revision 0
> > Apr 10 15:12:42 mhfl1 kernel: PIIX3: not 100%% native mode: will probe irqs later
> > Apr 10 15:12:42 mhfl1 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
> > Apr 10 15:12:42 mhfl1 kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
> > Apr 10 15:12:42 mhfl1 kernel: hda: QUANTUM BIGFOOT2550A, ATA DISK drive
> > Apr 10 15:12:42 mhfl1 kernel: blk: queue c0347ae0, I/O limit 4095Mb (mask 0xffffffff)
> > Apr 10 15:12:42 mhfl1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > Apr 10 15:12:43 mhfl1 kernel: hda: attached ide-disk driver.
> >
> > ------------------------------\/
> > Apr 10 15:12:43 mhfl1 kernel: hda: task_no_data_intr: status=0x53 { DriveReady SeekComplete Index Error }
> > Apr 10 15:12:43 mhfl1 kernel: hda: task_no_data_intr: error=0x04 { DriveStatusError }
> >
> > Apr 10 15:12:43 mhfl1 kernel: hda: 5033952 sectors (2577 MB) w/87KiB Cache, CHS=624/128/63, DMA
> > Apr 10 15:12:43 mhfl1 kernel: Partition check:
> > Apr 10 15:12:43 mhfl1 kernel: hda: hda1 hda2 hda3
> >
> > ----------
> > Mar 30 15:46:51 mhfl1 kernel: Linux version 2.5.66-mhf2 (mhf@mhfl2) (gcc version 2.95.3 20010315 (release)) #12 Sat Mar 29
> >
> > Mar 30 15:47:05 mhfl1 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > Mar 30 15:47:05 mhfl1 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > Mar 30 15:47:05 mhfl1 kernel: PIIX3: IDE controller at PCI slot 00:07.1
> > Mar 30 15:47:05 mhfl1 kernel: PIIX3: chipset revision 0
> > Mar 30 15:47:05 mhfl1 kernel: PIIX3: not 100%% native mode: will probe irqs later
> > Mar 30 15:47:05 mhfl1 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
> > Mar 30 15:47:05 mhfl1 kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
> > Mar 30 15:47:05 mhfl1 kernel: hda: QUANTUM BIGFOOT2550A, ATA DISK drive
> > Mar 30 15:47:05 mhfl1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> >
> > ------------------------------\/
> > Mar 30 15:47:05 mhfl1 kernel: hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
> > Mar 30 15:47:05 mhfl1 kernel: hda: task_no_data_intr: error=0x04 { DriveStatusError }
> >
> > Mar 30 15:47:05 mhfl1 kernel: hda: 5033952 sectors (2577 MB) w/87KiB Cache, CHS=4994/16/63, DMA
> > Mar 30 15:47:05 mhfl1 kernel: hda: hda1 hda2 hda3
> >
> > Regards
> > Michael
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
>
> Andre Hedrick
> LAD Storage Consulting Group
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/