--=_server2.netdiscount.de-17481-1049757903-0001-2
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Hello,
the second PCI bus doesn't work with 2.5.67 (the same with .66), but
with 2.4.20 it works.
I ppended the lspci -vv output with 2.5.67 and 2.4.20, the kernel
messages and a stripped .config.
(the config should be ok, it worked with the same on a dual xeon with
PCI-X)
Are there other details needed?
Christian Leber
-- "Omnis enim res, quae dando non deficit, dum habetur et non datur, nondum habetur, quomodo habenda est." (Aurelius Augustinus) Translation: <http://gnuhh.org/work/fsf-europe/augustinus.html>--=_server2.netdiscount.de-17481-1049757903-0001-2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lspci_2.5.67"
00:00.0 Host bridge: ServerWorks CNB20LE (rev 06) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32, cache line size 08
00:00.1 Host bridge: ServerWorks CNB20LE (rev 06) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16, cache line size 08
00:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 0008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 22 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at d800 [size=256] Region 2: Memory at fe9ff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fe9c0000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08) Subsystem: Intel Corporation 82559 Fast Ethernet LAN on Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 31 Region 0: Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at d400 [size=64] Region 2: Memory at fe800000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fe700000 [disabled] [size=1M] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0f.0 ISA bridge: ServerWorks OSB4 (rev 51) Subsystem: ServerWorks OSB4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:0f.1 IDE interface: ServerWorks: Unknown device 0211 (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at ffa0 [size=16]
00:0f.2 USB Controller: ServerWorks: Unknown device 0220 (rev 04) (prog-if 10 [OHCI]) Subsystem: ServerWorks: Unknown device 0220 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (20000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
--=_server2.netdiscount.de-17481-1049757903-0001-2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lspci_2.4.20"
00:00.0 Host bridge: ServerWorks CNB20LE (rev 06) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32, cache line size 08
00:00.1 Host bridge: ServerWorks CNB20LE (rev 06) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16, cache line size 08
00:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 0008 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 22 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at d800 [size=256] Region 2: Memory at fe9ff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fe9c0000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08) Subsystem: Intel Corporation 82559 Fast Ethernet LAN on Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 31 Region 0: Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at d400 [size=64] Region 2: Memory at fe800000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fe700000 [disabled] [size=1M] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0f.0 ISA bridge: ServerWorks OSB4 (rev 51) Subsystem: ServerWorks OSB4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:0f.1 IDE interface: ServerWorks: Unknown device 0211 (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at ffa0 [size=16]
00:0f.2 USB Controller: ServerWorks: Unknown device 0220 (rev 04) (prog-if 10 [OHCI]) Subsystem: ServerWorks: Unknown device 0220 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (20000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
01:02.0 Network controller: Unknown device 5255:0000 Subsystem: Unknown device 0001:0000 Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (63750ns min, 63750ns max), cache line size 08 Interrupt: pin A routed to IRQ 26 Region 0: Memory at fc500000 (64-bit, prefetchable) [size=1M] Capabilities: [40] #07 [0002] Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000
--=_server2.netdiscount.de-17481-1049757903-0001-2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg_2.5.67"
0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 999.0359 MHz. ..... host bus clock speed is 133.0247 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 32 Initializing RT netlink socket mtrr: v2.0 (20020519) PCI: PCI BIOS revision 2.10 entry at 0xfdbb1, last bus=1 PCI: Using configuration type 1 BIO: pool of 256 setup, 15Kb (60 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030328 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired dswload-0552: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [OSB4] had invalid type (String) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope) dswload-0552: *** Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope) Parsing all Control Methods:................................................................................................................................................................................................. Table [DSDT] - 689 Objects with 44 Devices 193 Methods 24 Regions ACPI Namespace successfully loaded at root c05706fc IOAPIC[0]: Set PCI routing entry (4-9 -> 0x71 -> IRQ 9) evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0731 [06] ev_create_gpe_block : GPE Block: [_GPE] 4 registers at 0000000000000514 on interrupt 9 evgpeblk-0736 [06] ev_create_gpe_block : GPE Block defined as GPE 0x00 to GPE 0x1F evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L10 as GPE number 0x10 evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L0B as GPE number 0x0B evgpeblk-0731 [06] ev_create_gpe_block : GPE Block: [_GPE] 4 registers at 0000000000000560 on interrupt 9 evgpeblk-0736 [06] ev_create_gpe_block : GPE Block defined as GPE 0x20 to GPE 0x3F Executing all Device _STA and_INI methods:............................................ 44 Devices found containing: 44 _STA, 2 _INI methods Completing Region/Field/Buffer/Package initialization:............................................................................. Initialized 21/24 Regions 2/2 Fields 40/40 Buffers 14/14 Packages (689 nodes) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [NRTH] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.NRTH._PRT] ACPI: PCI Root Bridge [PCI1] (00:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] pci_link-0256 [10] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [13] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [16] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [19] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [22] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [25] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 9 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [30] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [33] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [36] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 9 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [41] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [44] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [47] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 9 11 12 14 15, disabled) pci_link-0256 [50] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 7 9 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 9 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNUS] (IRQs 10, disabled) Linux Plug and Play Support v0.96 (c) Adam Belay block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN00] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN01] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN02] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN03] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN04] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN05] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN06] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN07] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN08] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN09] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN10] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN11] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN12] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN13] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN14] enabled at IRQ 0 pci_link-0349 [50] acpi_pci_link_set : Link disabled ACPI: PCI Interrupt Link [LN15] enabled at IRQ 0 dsopcode-0515 [61] ds_init_buffer_field : Field size 72 exceeds Buffer size 48 (bits) psparse-1121: *** Error: Method execution failed [\_SB_.LNUS._SRS] (Node c14c22c8), AE_AML_BUFFER_LIMIT pci_link-0338 [50] acpi_pci_link_set : Error evaluating _SRS ACPI: PCI Interrupt Link [LNUS] enabled at IRQ 0 IOAPIC[1]: Set PCI routing entry (5-0 -> 0xa9 -> IRQ 16) 00:00:01[A] -> 5-0 -> IRQ 16 IOAPIC[1]: Set PCI routing entry (5-1 -> 0xb1 -> IRQ 17) 00:00:01[B] -> 5-1 -> IRQ 17 Pin 5-0 already programmed Pin 5-1 already programmed IOAPIC[1]: Set PCI routing entry (5-2 -> 0xb9 -> IRQ 18) 00:00:02[A] -> 5-2 -> IRQ 18 IOAPIC[1]: Set PCI routing entry (5-3 -> 0xc1 -> IRQ 19) 00:00:02[B] -> 5-3 -> IRQ 19 Pin 5-2 already programmed Pin 5-3 already programmed IOAPIC[1]: Set PCI routing entry (5-4 -> 0xc9 -> IRQ 20) 00:00:03[A] -> 5-4 -> IRQ 20 IOAPIC[1]: Set PCI routing entry (5-5 -> 0xd1 -> IRQ 21) 00:00:03[B] -> 5-5 -> IRQ 21 Pin 5-4 already programmed Pin 5-5 already programmed IOAPIC[1]: Set PCI routing entry (5-6 -> 0xd9 -> IRQ 22) 00:00:04[A] -> 5-6 -> IRQ 22 IOAPIC[1]: Set PCI routing entry (5-7 -> 0xe1 -> IRQ 23) 00:00:04[B] -> 5-7 -> IRQ 23 Pin 5-6 already programmed Pin 5-7 already programmed IOAPIC[1]: Set PCI routing entry (5-15 -> 0xe9 -> IRQ 31) 00:00:06[A] -> 5-15 -> IRQ 31 IOAPIC[1]: Set PCI routing entry (5-8 -> 0x32 -> IRQ 24) 00:00:01[A] -> 5-8 -> IRQ 24 IOAPIC[1]: Set PCI routing entry (5-9 -> 0x3a -> IRQ 25) 00:00:01[B] -> 5-9 -> IRQ 25 Pin 5-8 already programmed Pin 5-9 already programmed IOAPIC[1]: Set PCI routing entry (5-10 -> 0x42 -> IRQ 26) 00:00:02[A] -> 5-10 -> IRQ 26 IOAPIC[1]: Set PCI routing entry (5-11 -> 0x4a -> IRQ 27) 00:00:02[B] -> 5-11 -> IRQ 27 Pin 5-10 already programmed Pin 5-11 already programmed IOAPIC[1]: Set PCI routing entry (5-12 -> 0x52 -> IRQ 28) 00:00:03[A] -> 5-12 -> IRQ 28 pci_link-0502 [51] acpi_pci_link_get_irq : Link disabled pci_irq-0256 [50] acpi_pci_irq_lookup : Invalid IRQ link routing entry pci_irq-0295 [50] acpi_pci_irq_derive : Unable to derive IRQ for device 00:0f.2 ACPI: No IRQ known for interrupt pin A of device 00:0f.2 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Starting balanced_irq Enabling SEP on CPU 1 Enabling SEP on CPU 0 Total HugeTLB memory allocated, 0 Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem SGI XFS for Linux 2.5.67 with no debug enabled ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] acpi_processor-0962 [54] acpi_processor_get_thr: duty_cycle spans bit 4 ACPI: Processor [CPU0] (supports C1) acpi_processor-0962 [54] acpi_processor_get_thr: duty_cycle spans bit 4 ACPI: Processor [CPU1] (supports C1) pty: 256 Unix98 ptys configured request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Linux agpgart interface v0.100 (c) Dave Jones agpgart: Maximum main memory to use for agp memory: 374M agpgart: unable to determine aperture size. agpgart: Maximum main memory to use for agp memory: 374M agpgart: unable to determine aperture size. [drm] Initialized radeon 1.8.0 20020828 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) lp0: using parport0 (polling). Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Intel(R) PRO/100 Network Driver - version 2.2.21-k1 Copyright (c) 2003 Intel Corporation
e100: selftest OK. Freeing alive device c1764800, eth%d e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled
Intel(R) PRO/1000 Network Driver - version 5.0.43-k1 Copyright (c) 1999-2003 Intel Corporation. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks OSB4: IDE controller at PCI slot 00:0f.1 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: IC35L040AVER07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, (U)DMA hda: hda1 hda2 < hda5 hda6 hda7 > hda3 hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.12 end_request: I/O error, dev hdc, sector 0 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 mice: PS/2 mouse device common for all mice input: PS/2 Logitech Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.2 (Thu Mar 20 13:31:57 2003 UTC). request_module: failed /sbin/modprobe -- snd-card-0. error = -16 ALSA device list: No soundcards found. NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. BIOS EDD facility v0.09 2003-Jan-22, 1 devices found UDF-fs DEBUG fs/udf/lowlevel.c:65:udf_get_last_session: CDROMMULTISESSION not supported: rc=-25 UDF-fs DEBUG fs/udf/super.c:1472:udf_fill_super: Multi-session=0 UDF-fs DEBUG fs/udf/super.c:460:udf_vrs: Starting at sector 16 (2048 byte sectors) UDF-fs DEBUG fs/udf/super.c:1208:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check UDF-fs DEBUG fs/udf/misc.c:286:udf_read_tagged: location mismatch block 256, tag 454 != 256 UDF-fs DEBUG fs/udf/super.c:1262:udf_load_partition: No Anchor block found UDF-fs: No partition found (1) found reiserfs format "3.5" with standard journal Reiserfs journal params: device ide0(3,6), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide0(3,6)) for (ide0(3,6)) Using r5 hash to sort names reiserfs: using 3.5.x disk format VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 140k freed Adding 112412k swap on /dev/hda7. Priority:42 extents:1 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. e100: eth0 NIC Link is Up 100 Mbps Full duplex
--=_server2.netdiscount.de-17481-1049757903-0001-2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="config_2.5.67_stripped"
CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_EXPERIMENTAL=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=15 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y CONFIG_X86_PC=y CONFIG_MPENTIUMIII=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_PREFETCH=y CONFIG_HUGETLB_PAGE=y CONFIG_SMP=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_NR_CPUS=32 CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_EDD=y CONFIG_HIGHMEM4G=y CONFIG_HIGHMEM=y CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y CONFIG_PM=y CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_DEBUG=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_ISA=y CONFIG_HOTPLUG=y CONFIG_PCMCIA=y CONFIG_CARDBUS=y CONFIG_PCMCIA_PROBE=y CONFIG_KCORE_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y CONFIG_PARPORT_1284=y CONFIG_PNP=y CONFIG_PNP_NAMES=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y CONFIG_LBD=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_CMD640=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_PIIX=y CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_SVWKS=y CONFIG_IDEDMA_AUTO=y CONFIG_BLK_DEV_IDE_MODES=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IPV6_SCTP__=y CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_NET_ETHERNET=y CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=y CONFIG_NET_PCI=y CONFIG_E100=y CONFIG_E1000=y CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_PCNET=y CONFIG_INPUT=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=y CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_AGP_VIA=y CONFIG_AGP_AMD=y CONFIG_AGP_SIS=y CONFIG_AGP_ALI=y CONFIG_AGP_SWORKS=y CONFIG_DRM=y CONFIG_DRM_RADEON=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_JBD=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_UDF_FS=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_FS=y CONFIG_DEVPTS_FS=y CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_INTEL8X0=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_UHCI_HCD=y CONFIG_PROFILING=y CONFIG_OPROFILE=m CONFIG_KALLSYMS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_FRAME_POINTER=y CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y
--=_server2.netdiscount.de-17481-1049757903-0001-2-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/