Index: linux-2.5.66/drivers/net/tulip/xircom_cb.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.66/drivers/net/tulip/xircom_cb.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 xircom_cb.c
--- linux-2.5.66/drivers/net/tulip/xircom_cb.c 24 Mar 2003 23:39:20 -0000 1.1.1.1
+++ linux-2.5.66/drivers/net/tulip/xircom_cb.c 6 Apr 2003 20:25:44 -0000
@@ -73,6 +73,8 @@ MODULE_LICENSE("GPL");
/* Offsets of the buffers within the descriptor pages, in bytes */
#define NUMDESCRIPTORS 4
+#define RX_BUF_SIZE 8192
+#define TX_BUF_SIZE 8192
static int bufferoffsets[NUMDESCRIPTORS] = {128,2048,4096,6144};
@@ -96,7 +98,7 @@ struct xircom_private {
int transmit_used;
/* Spinlock to serialize register operations.
- It must be helt while manipulating the following registers:
+ It must be held whilst manipulating the following registers:
CSR0, CSR6, CSR7, CSR9, CSR10, CSR15
*/
spinlock_t lock;
@@ -220,12 +222,13 @@ static int __devinit xircom_probe(struct
unsigned char chip_rev;
unsigned long flags;
unsigned short tmp16;
+ int ret = -EIO;
enter("xircom_probe");
/* First do the PCI initialisation */
if (pci_enable_device(pdev))
- return -ENODEV;
+ goto out;
/* disable all powermanagement */
pci_write_config_dword(pdev, PCI_POWERMGMT, 0x0000);
@@ -238,9 +241,10 @@ static int __devinit xircom_probe(struct
pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
+ ret = -ENOMEM;
if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
- return -ENODEV;
+ goto out;
}
@@ -250,30 +254,27 @@ static int __devinit xircom_probe(struct
is available.
*/
private = kmalloc(sizeof(*private),GFP_KERNEL);
- memset(private, 0, sizeof(struct xircom_private));
+ if (private == NULL)
+ goto out_region;
+
+ memset(private, 0, sizeof(*private));
/* Allocate the send/receive buffers */
- private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle);
+ private->rx_buffer = pci_alloc_consistent(pdev,RX_BUF_SIZE,&private->rx_dma_handle);
if (private->rx_buffer == NULL) {
printk(KERN_ERR "xircom_probe: no memory for rx buffer \n");
- kfree(private);
- return -ENODEV;
+ goto out_free1;
}
- private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle);
+ private->tx_buffer = pci_alloc_consistent(pdev,TX_BUF_SIZE,&private->tx_dma_handle);
if (private->tx_buffer == NULL) {
printk(KERN_ERR "xircom_probe: no memory for tx buffer \n");
- kfree(private->rx_buffer);
- kfree(private);
- return -ENODEV;
+ goto out_free2;
}
dev = init_etherdev(dev, 0);
if (dev == NULL) {
printk(KERN_ERR "xircom_probe: failed to allocate etherdev\n");
- kfree(private->rx_buffer);
- kfree(private->tx_buffer);
- kfree(private);
- return -ENODEV;
+ goto out_free3;
}
SET_MODULE_OWNER(dev);
printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, chip_rev, pdev->irq);
@@ -304,14 +305,25 @@ static int __devinit xircom_probe(struct
transceiver_voodoo(private);
spin_lock_irqsave(&private->lock,flags);
- activate_transmitter(private);
- activate_receiver(private);
+ activate_transmitter(private);
+ activate_receiver(private);
spin_unlock_irqrestore(&private->lock,flags);
trigger_receive(private);
-
+ ret = 0;
+ goto out;
+
+out_free3:
+ pci_free_consistent(pdev, TX_BUF_SIZE, private->tx_buffer, private->tx_dma_handle);
+out_free2:
+ pci_free_consistent(pdev, RX_BUF_SIZE, private->rx_buffer, private->rx_dma_handle);
+out_free1:
+ kfree(private);
+out_region:
+ release_region(pci_resource_start(pdev, 0), 128);
+out:
leave("xircom_probe");
- return 0;
+ return ret;
}
@@ -330,10 +342,10 @@ static void __devexit xircom_remove(stru
card=dev->priv;
if (card!=NULL) {
if (card->rx_buffer!=NULL)
- pci_free_consistent(pdev,8192,card->rx_buffer,card->rx_dma_handle);
+ pci_free_consistent(pdev,RX_BUF_SIZE,card->rx_buffer,card->rx_dma_handle);
card->rx_buffer = NULL;
if (card->tx_buffer!=NULL)
- pci_free_consistent(pdev,8192,card->tx_buffer,card->tx_dma_handle);
+ pci_free_consistent(pdev,TX_BUF_SIZE,card->tx_buffer,card->tx_dma_handle);
card->tx_buffer = NULL;
}
kfree(card);
-- function.linuxpower.ca - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/