Stop right here. We don't want even more muliplexer syscalls. Please
untangle this to individual calls.
>
> 0x0001 - BPROC_SYS_VERSION - get BProc version
> arg1 is a pointer to a bproc_version_t which gets filled in.
>
> return value: 0 on success, -errno on error
Scratch this one, syscall ABIs are supposed to be stable.
>
> 0x0002 - BPROC_SYS_DEBUG - undocumented debugging call a magic
> debugging hook who's argument meanings are fluid, currently it does:
> arg1 = 0 - return number of children by checking pptr and opptr.
> arg1 = 1 - return true/false indicating whether wait() will be local.
> arg1 = 2 - return value of nlchild (internal BProc process book keeping val)
> arg1 = 3 - perform process ID sanity check and return information about
> pptr and opptr in linux and BProc.
Debug stuff doesn't need a syscall, please get rid of this one.
> 0x0003 - BPROC_SYS_MASTER - get master daemon file descriptor. The master
> daemon reads/writes messages to/from kernel
> space with this file descriptor.
> no arguments
>
> return value: a new file descriptor or -errno on failure.
Shouldn't this better be a new character device?
(Dito for the other fd stuff)
> 0x0201 - BPROC_SYS_INFO - get information on node status
> arg1 pointer to an array of bproc_node_info_t's (first element contains
> index of last node seen, nodes returned will start with next node)
> arg2 number of elements in array
>
> return value: number of elements returned on success, -errno on error
This should be read() on a special file.
>
> 0x0202 - BPROC_SYS_STATUS - set node status
> arg1 node number
> arg2 new node state
>
> return value: 0 on success, -errno on error
Write on a special file.
>
> 0x0203 - BPROC_SYS_CHOWN - change node permission bits (perms are file-like)
So why is this no file, e.g. in sysfs?
> 0x0207 - BPROC_SYS_CHROOT - ask slave node to chroot()
> arg1 node number
> arg2 pointer to patch to chroot() to.
Please explain this a bit more. Can't you use namespace properly on
the slaves somehow?
> 0x0208 - BPROC_SYS_REBOOT - ask slave node to reboot
> arg1 node number
>
> return value: 0 on success, -errno on error
>
> 0x0209 - BPROC_SYS_HALT - ask slave node to halt
> arg1 node number
>
> return value: 0 on success, -errno on error
>
> 0x020A - BPROC_SYS_PWROFF - ask slave node to power off
> arg1 node number
>
> return value: 0 on success, -errno on error
Can't you just call sys_reboot on the remote node?
>
> 0x020B - BPROC_SYS_PINFO - get information about location of remote processes
> arg1 pointer to an array of bproc_proc_info_t's (first element contains
> index of last proc seen, procs returned will start with next node)
> arg2 number of elements in array
>
> return value: number of elements returned on success, -errno on error
Should be read() on a special file.
>
> 0x020E - BPROC_SYS_RECONNECT - ask slave daemon to reconnect
> arg1 node number
> arg2 pointer to bproc_connect_t which contains 2 sockaddrs - a local
> and remote address for the slave to use when re-connecting to
> the master.
Don't use bproc_connect_t but the real arguments.
> 0x0301 - BPROC_SYS_REXEC - remote exec (replace current process with exec
> performed on remote node)
> arg1 node number
> arg2 pointer to bproc_move_t (contains exec args, io setup info, etc)
>
> return value: no return (it's an exec) on success, -errno on error
>
> 0x0302 - BPROC_SYS_MOVE - move caller to remote node
> arg1 node number
> arg2 pointer to bproc_move_t (contains flags, io setup info, etc)
>
> arg2 move flags (how much of the memory space gets sent)
>
> return value: 0 on success, -errno on error
>
> 0x0303 - BPROC_SYS_RFORK - fork a child onto another node. This is a
> combination of the fork and move calls with
> semantics such that no child process is
> ever created (from the parent's point of
> view) if the move step fails.
> arg1 node number
> arg2 pointer to bproc_move_t (contains flags, io setup info, etc)
>
> return value: parent: child pid on success, -errno on error
> child: 0
>
> 0x0304 - BPROC_SYS_EXECMOVE - exec and then move. This is a
> combination of the xec and move
> syscalls. This call performs an exec
> and then moves the resulting process
> image to a remote node before it is
> allowed to run. This is used to place
> images of programs which are not BProc
> aware on remote nodes.
> arg1 node number
> arg2 pointer to bproc_move_t (contains exec args, io setup info, etc.)
>
> return value: no return on success, -errno on error if error happens
> in exec(). If error happens during the move step the process will
> exit with errno as its status.
>
> 0x0306 - BPROC_SYS_VRFORK - vector rfork - create many child processes
> on many remote nodes efficiently.
>
> arg1 pointer to bproc_move_t. This contains the number of children
> to create, a list of nodes to move to, an array to store the
> resulting child process IDs, and possibly IO setup information.
>
> return value: parent: number of nodes or -errno on error.
> pid array contains pids or -errno for each child.
> child: rank in list of nodes (0 .. n-1)
>
> 0x0307 - BPROC_SYS_EXEC - use master node to perform exec. A process
> running on a slave node can ask it's "ghost"
> on the front end to perform an exec for it.
> The results of that exec will replace the
> process on the slave node.
> arg1 pointer to bproc_move_t (contains execve args)
>
> return value: no return on success, -errno on failure.
>
> 0x0309 - BPROC_SYS_VEXECMOVE - vector execmove - create many child
> processes on many remote nodes
> efficiently. The child process image
> is the result of the supplied execve.
>
> arg1 pointer to bproc_move_t. This contains the number of children
> to create, a list of nodes to move to, an array to store the
> resulting child process IDs, execve args and possibly IO setup
> information.
>
> return value: parent: number of nodes or -errno on failure. The array
> children: no return. If BPROC_RANK=XXXXXXX exists in the
> environment, vexecmove will replace the Xs with
> the child's rank in vexecmove.
>
> 0x1000 - at this offset, bproc provides an interface to virtual memory
> area dumper (vmadump). VMADump is the process save/restore
> mechanism that BProc uses internally.
I think all these are pretty generic for any SSI clustering. Could
you please talk to the Compaq and Mosix folks about a common API?
> 0x1000 - VMAD_DO_DUMP - dump the calling process's image to a file descriptor
> arg1 file descriptor
> arg2 dump flags (controls which regions are dumped and which regions
> are stored as references to files.)
>
> return value: during dump: number of bytes written to the file descriptor.
> during undump: 0 (when the process image is restored, it will
> start by returning from this system call)
I'm pretty sure this would better be a /proc/<pid>/image file you
can read from.
> 0x1001 - VMAD_DO_UNDUMP - restore a process image from a file
> descriptor. The new image will replace the
> calling process just like exec.
> arg1 file descriptor
>
> return value: no return on success, -errno on failure.
>
> side note: where possible, vmadump adds a binary format for dump files
> which allows a dump stored in a file to be executed directly.
Can't you always use this binary format? And btw, does this checkpoint
and restore code depend on the rest of bproc? I'd love to see it even
in normal, not cluster-awaer kernels.
> 0x1030 - VMAD_LIB_CLEAR - clear the library list
> no arguments
What library lists are all those calls about? Needs more explanation.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/