Re: [Linux-fbdev-devel] [PATCH]: EDID parser

[Petr Vandrovec]

On  3 Apr 03 at 14:38, Sven Luther wrote:
> On Thu, Apr 03, 2003 at 12:05:13PM +0100, Petr Vandrovec wrote:
> > No. With matroxfb, you have two framebuffer devices, /dev/fb0 & /dev/fb1,
> > which can be connected to any of three outputs: analog primary, analog
> > secondary and DVI. Analog primary & DVI share same pair of DDC cables,
> > and analog secondary has its own... And user can interconnect fb* with
> > outputs in almost any way he wants, as long as hardware supports it.
> 
> Mmm, i have not been into fbdev much lately, but for my X devel work, i
> believe thta it is a good thing to separate the framebuffer issues from
> the output issues, and thus, for the card i have at least, have one
> function where the per chip things are done (memory detection, bypass
> unit handling, framebuffer and memory management) and another set of
> functions which would be head, that is output, specific. This way, you
> would configure the /dev/fbx and when the user which to use this or that
> output, the DDC will be connected to the output, not the framebuffer.
> This seems a reasonable way of doing this and should solve your problem,
> no ?

Of course. But because of James decided that fbdev layer will automatically
choose appropriate resolution only from xres/yres, I need to have monitor
capabilities at the time upper layer asks to set videomode on /dev/fbx...
And it just sets it on /dev/fbx, leaving out both VTs (so I cannot remember
what mode was probed on each VT anymore) and outputs.
                                                                Petr