--=_courier-13524-1047674481-0001-2
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Here's a patch to dig the PCI bus to node mapping information out of the
deep, dank recesses of the EBDA tables for the Summit machines. This
info is then used for the pcibus_to_cpumask() topology function.
brief summary:
This patch adds a new file, arch/i386/kernel/summit.c, for
summit-specific code. Adds some structures to mach_mpparse.h. Also
adds a hook in setup_arch() to dig out the PCI info, and stores it in
the mp_bus_id_to_node[] array, where it can be read by the topology
functions.
As always, questions, comments, or praise (yeah, right) welcome!
arch/i386/kernel/Makefile | 1
arch/i386/kernel/setup.c | 3
arch/i386/kernel/summit.c | 162
++++++++++++++++++++++++++++
include/asm-i386/mach-summit/mach_mpparse.h | 69 +++++++++++
include/asm-i386/mpspec.h | 4
5 files changed, 239 insertions(+)
Cheers!
-Matt
--=_courier-13524-1047674481-0001-2
Content-Type: text/plain; name="summit_pcimap-2.5.64-patch"; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="summit_pcimap-2.5.64-patch"
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/arch/i386/kernel/Makefile linux-2.5.64-summit_pcimap/arch/i386/kernel/Makefile
--- linux-2.5.64-vanilla/arch/i386/kernel/Makefile Tue Mar 4 19:29:01 2003
+++ linux-2.5.64-summit_pcimap/arch/i386/kernel/Makefile Fri Mar 14 09:54:18 2003
@@ -25,6 +25,7 @@
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend.o suspend_asm.o
obj-$(CONFIG_X86_NUMAQ) += numaq.o
+obj-$(CONFIG_X86_SUMMIT) += summit.o
obj-$(CONFIG_EDD) += edd.o
obj-$(CONFIG_MODULES) += module.o
obj-y += sysenter.o
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/arch/i386/kernel/setup.c linux-2.5.64-summit_pcimap/arch/i386/kernel/setup.c
--- linux-2.5.64-vanilla/arch/i386/kernel/setup.c Tue Mar 4 19:29:18 2003
+++ linux-2.5.64-summit_pcimap/arch/i386/kernel/setup.c Fri Mar 14 09:56:21 2003
@@ -918,6 +918,9 @@
if (smp_found_config)
get_smp_config();
#endif
+#ifdef CONFIG_X86_SUMMIT
+ setup_summit();
+#endif
register_memory(max_low_pfn);
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/arch/i386/kernel/summit.c linux-2.5.64-summit_pcimap/arch/i386/kernel/summit.c
--- linux-2.5.64-vanilla/arch/i386/kernel/summit.c Wed Dec 31 16:00:00 1969
+++ linux-2.5.64-summit_pcimap/arch/i386/kernel/summit.c Fri Mar 14 11:03:15 2003
@@ -0,0 +1,162 @@
+/*
+ * arch/i386/kernel/summit.c - IBM Summit-Specific Code
+ *
+ * Written By: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (c) 2003 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <mach_mpparse.h>
+
+static void __init setup_pci_node_map_for_wpeg(int wpeg_num, struct rio_table_hdr *rth,
+ struct scal_detail **scal_nodes, struct rio_detail **rio_nodes){
+ int twst_num = 0, node = 0, first_bus = 0;
+ int i, bus, num_busses;
+
+ for(i = 0; i < rth->num_rio_dev; i++){
+ if (rio_nodes[i]->node_id == rio_nodes[wpeg_num]->owner_id){
+ twst_num = rio_nodes[i]->owner_id;
+ break;
+ }
+ }
+ if (i == rth->num_rio_dev){
+ printk("%s: Couldn't find owner Cyclone for Winnipeg!\n", __FUNCTION__);
+ return;
+ }
+
+ for(i = 0; i < rth->num_scal_dev; i++){
+ if (scal_nodes[i]->node_id == twst_num){
+ node = scal_nodes[i]->node_id;
+ break;
+ }
+ }
+ if (i == rth->num_scal_dev){
+ printk("%s: Couldn't find owner Twister for Cyclone!\n", __FUNCTION__);
+ return;
+ }
+
+ switch (rio_nodes[wpeg_num]->type){
+ case CompatWPEG:
+ /* The Compatability Winnipeg controls the legacy busses
+ (busses 0 & 1), the 66MHz PCI bus [2 slots] (bus 2),
+ and the "extra" busses in case a PCI-PCI bridge card is
+ used in either slot (busses 3 & 4): total 5 busses. */
+ num_busses = 5;
+ /* The BIOS numbers the busses starting at 1, and in a
+ slightly wierd manner. You'll have to trust that
+ the math used below to determine the number of the
+ first bus works. */
+ first_bus = (rio_nodes[wpeg_num]->first_slot - 1) * 2;
+ break;
+ case AltWPEG:
+ /* The Alternate/Secondary Winnipeg controls the 1st 133MHz
+ bus [1 slot] & its "extra" bus (busses 0 & 1), the 2nd
+ 133MHz bus [1 slot] & its "extra" bus (busses 2 & 3), the
+ 100MHz bus [2 slots] (bus 4), and the "extra" busses for
+ the 2 100MHz slots (busses 5 & 6): total 7 busses. */
+ num_busses = 7;
+ first_bus = (rio_nodes[wpeg_num]->first_slot * 2) - 1;
+ break;
+ case LookOutAWPEG:
+ case LookOutBWPEG:
+ printk("%s: LookOut Winnipegs not supported yet!\n", __FUNCTION__);
+ return;
+ default:
+ printk("%s: Unsupported Winnipeg type!\n", __FUNCTION__);
+ return;
+ }
+
+ for(bus = first_bus; bus < first_bus + num_busses; bus++)
+ mp_bus_id_to_node[bus] = node;
+}
+
+static void __init build_detail_arrays(struct rio_table_hdr *rth,
+ struct scal_detail **sd, struct rio_detail **rd){
+ unsigned long ptr;
+ int i, scal_detail_size, rio_detail_size;
+
+ switch (rth->version){
+ default:
+ printk("%s: Bad Rio Grande Table Version: %d\n", __FUNCTION__, rth->version);
+ /* Fall through to default to version 2 spec */
+ case 2:
+ scal_detail_size = 11;
+ rio_detail_size = 13;
+ break;
+ case 3:
+ scal_detail_size = 12;
+ rio_detail_size = 15;
+ break;
+ }
+
+ ptr = (unsigned long)rth + 3;
+ for(i = 0; i < rth->num_scal_dev; i++)
+ sd[i] = (struct scal_detail *)(ptr + (scal_detail_size * i));
+
+ ptr += scal_detail_size * rth->num_scal_dev;
+ for(i = 0; i < rth->num_rio_dev; i++)
+ rd[i] = (struct rio_detail *)(ptr + (rio_detail_size * i));
+}
+
+void __init setup_summit(void)
+{
+ struct rio_table_hdr *rio_table_hdr = NULL;
+ struct scal_detail *scal_devs[MAX_NUMNODES];
+ struct rio_detail *rio_devs[MAX_NUMNODES*2];
+ unsigned long ptr;
+ unsigned short offset;
+ int i;
+
+ memset(mp_bus_id_to_node, -1, sizeof(mp_bus_id_to_node));
+
+ /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
+ ptr = *(unsigned short *)phys_to_virt(0x40Eul);
+ ptr = (unsigned long)phys_to_virt(ptr << 4);
+
+ offset = 0x180;
+ while (offset){
+ /* The block id is stored in the 2nd word */
+ if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
+ /* set the pointer past the offset & block id */
+ rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
+ break;
+ }
+ /* The next offset is stored in the 1st word. 0 means no more */
+ offset = *((unsigned short *)(ptr + offset));
+ }
+ if (!rio_table_hdr){
+ printk("%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __FUNCTION__);
+ return;
+ }
+
+ /* Deal with the ugly version 2/3 pointer arithmetic */
+ build_detail_arrays(rio_table_hdr, scal_devs, rio_devs);
+
+ for(i = 0; i < rio_table_hdr->num_rio_dev; i++)
+ if (is_WPEG(rio_devs[i]->type))
+ /* It's a Winnipeg, it's got PCI Busses */
+ setup_pci_node_map_for_wpeg(i, rio_table_hdr, scal_devs, rio_devs);
+}
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/include/asm-i386/mach-summit/mach_mpparse.h linux-2.5.64-summit_pcimap/include/asm-i386/mach-summit/mach_mpparse.h
--- linux-2.5.64-vanilla/include/asm-i386/mach-summit/mach_mpparse.h Tue Mar 4 19:29:17 2003
+++ linux-2.5.64-summit_pcimap/include/asm-i386/mach-summit/mach_mpparse.h Fri Mar 14 12:20:38 2003
@@ -1,6 +1,8 @@
#ifndef __ASM_MACH_MPPARSE_H
#define __ASM_MACH_MPPARSE_H
+#include <mach_apic.h>
+
extern int use_cyclone;
static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
@@ -33,4 +35,71 @@
use_cyclone = 1; /*enable cyclone-timer*/
}
}
+
+struct rio_table_hdr {
+ unsigned char version; /* Version number of this data structure */
+ /* Version 3 adds chassis_num & WP_index */
+ unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */
+ unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */
+} __attribute__((packed));
+
+struct scal_detail {
+ unsigned char node_id; /* Scalability Node ID */
+ unsigned long CBAR; /* Address of 1MB register space */
+ unsigned char port0node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port1node; /* Node ID port connected to: 0xFF = None */
+ unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port2node; /* Node ID port connected to: 0xFF = None */
+ unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */
+} __attribute__((packed));
+
+struct rio_detail {
+ unsigned char node_id; /* RIO Node ID */
+ unsigned long BBAR; /* Address of 1MB register space */
+ unsigned char type; /* Type of device */
+ unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/
+ /* For CYC: Node ID of Twister that owns this CYC */
+ unsigned char port0node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port1node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */
+ /* For CYC: 0 */
+ unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */
+ /* = 0 : the XAPIC is not used, ie:*/
+ /* ints fwded to another XAPIC */
+ /* Bits1:7 Reserved */
+ /* For CYC: Bits0:7 Reserved */
+ unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */
+ /* lower slot numbers/PCI bus numbers */
+ /* For CYC: No meaning */
+ unsigned char chassis_num; /* 1 based Chassis number */
+ /* For LookOut WPEGs this field indicates the */
+ /* Expansion Chassis #, enumerated from Boot */
+ /* Node WPEG external port, then Boot Node CYC */
+ /* external port, then Next Vigil chassis WPEG */
+ /* external port, etc. */
+ /* Shared Lookouts have only 1 chassis number (the */
+ /* first one assigned) */
+} __attribute__((packed));
+
+
+typedef enum {
+ CompatTwister = 0, /* Compatibility Twister */
+ AltTwister = 1, /* Alternate Twister of internal 8-way */
+ CompatCyclone = 2, /* Compatibility Cyclone */
+ AltCyclone = 3, /* Alternate Cyclone of internal 8-way */
+ CompatWPEG = 4, /* Compatibility WPEG */
+ AltWPEG = 5, /* Second Planar WPEG */
+ LookOutAWPEG = 6, /* LookOut WPEG */
+ LookOutBWPEG = 7, /* LookOut WPEG */
+} node_type;
+
+static inline int is_WPEG(node_type type){
+ return (type == CompatWPEG || type == AltWPEG ||
+ type == LookOutAWPEG || type == LookOutBWPEG);
+}
+
#endif /* __ASM_MACH_MPPARSE_H */
diff -Nur --exclude-from=/usr/src/.dontdiff linux-2.5.64-vanilla/include/asm-i386/mpspec.h linux-2.5.64-summit_pcimap/include/asm-i386/mpspec.h
--- linux-2.5.64-vanilla/include/asm-i386/mpspec.h Tue Mar 4 19:28:53 2003
+++ linux-2.5.64-summit_pcimap/include/asm-i386/mpspec.h Fri Mar 14 09:58:46 2003
@@ -222,6 +222,10 @@
extern int pic_mode;
extern int using_apic_timer;
+#ifdef CONFIG_X86_SUMMIT
+extern void setup_summit (void);
+#endif
+
#ifdef CONFIG_ACPI_BOOT
extern void mp_register_lapic (u8 id, u8 enabled);
extern void mp_register_lapic_address (u64 address);
--=_courier-13524-1047674481-0001-2--