Remove support for the old PCMCIA cardbus clients - all cardbus
drivers should be converted to be full-class PCI citizens.
diff -ur orig/drivers/pcmcia/cardbus.c linux/drivers/pcmcia/cardbus.c
--- orig/drivers/pcmcia/cardbus.c Wed Mar 12 20:25:03 2003
+++ linux/drivers/pcmcia/cardbus.c Wed Mar 12 20:28:14 2003
@@ -326,66 +326,4 @@
kfree(c);
printk(KERN_INFO "cs: cb_free(bus %d)\n", s->cap.cb_dev->subordinate->number);
}
-}
-
-/*=====================================================================
-
- cb_enable() has the job of configuring a socket for a Cardbus
- card, and initializing the card's PCI configuration registers.
-
- It first sets up the Cardbus bridge windows, for IO and memory
- accesses. Then, it initializes each card function's base address
- registers, interrupt line register, and command register.
-
- It is called as part of the RequestConfiguration card service.
- It should be called after a previous call to cb_config() (via the
- RequestIO service).
-
-======================================================================*/
-
-void cb_enable(socket_info_t * s)
-{
- struct pci_dev *dev;
- u_char i;
-
- DEBUG(0, "cs: cb_enable(bus %d)\n", s->cap.cb_dev->subordinate->number);
-
- /* Configure bridge */
- cb_release_cis_mem(s);
-
- /* Set up PCI interrupt and command registers */
- for (i = 0; i < s->functions; i++) {
- dev = s->cb_config->dev[i];
- pci_write_config_byte(dev, PCI_COMMAND, PCI_COMMAND_MASTER |
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
- L1_CACHE_BYTES / 4);
- }
-
- if (s->irq.AssignedIRQ) {
- for (i = 0; i < s->functions; i++) {
- dev = s->cb_config->dev[i];
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
- s->irq.AssignedIRQ);
- }
- s->socket.io_irq = s->irq.AssignedIRQ;
- s->ss_entry->set_socket(s->sock, &s->socket);
- }
-}
-
-/*======================================================================
-
- cb_disable() unconfigures a Cardbus card previously set up by
- cb_enable().
-
- It is called from the ReleaseConfiguration service.
-
-======================================================================*/
-
-void cb_disable(socket_info_t * s)
-{
- DEBUG(0, "cs: cb_disable(bus %d)\n", s->cap.cb_dev->subordinate->number);
-
- /* Turn off bridge windows */
- cb_release_cis_mem(s);
}
diff -ur orig/drivers/pcmcia/cs.c linux/drivers/pcmcia/cs.c
--- orig/drivers/pcmcia/cs.c Sun Mar 2 17:05:18 2003
+++ linux/drivers/pcmcia/cs.c Sun Mar 2 17:45:53 2003
@@ -1518,11 +1518,8 @@
s = SOCKET(handle);
#ifdef CONFIG_CARDBUS
- if (handle->state & CLIENT_CARDBUS) {
- cb_disable(s);
- s->lock_count = 0;
+ if (handle->state & CLIENT_CARDBUS)
return CS_SUCCESS;
- }
#endif
if (!(handle->state & CLIENT_STALE)) {
@@ -1674,16 +1671,8 @@
return CS_NO_CARD;
#ifdef CONFIG_CARDBUS
- if (handle->state & CLIENT_CARDBUS) {
- if (!(req->IntType & INT_CARDBUS))
- return CS_UNSUPPORTED_MODE;
- if (s->lock_count != 0)
- return CS_CONFIGURATION_LOCKED;
- cb_enable(s);
- handle->state |= CLIENT_CONFIG_LOCKED;
- s->lock_count++;
- return CS_SUCCESS;
- }
+ if (handle->state & CLIENT_CARDBUS)
+ return CS_UNSUPPORTED_MODE;
#endif
if (req->IntType & INT_CARDBUS)
diff -ur orig/drivers/pcmcia/cs_internal.h linux/drivers/pcmcia/cs_internal.h
--- orig/drivers/pcmcia/cs_internal.h Sun Mar 2 17:05:18 2003
+++ linux/drivers/pcmcia/cs_internal.h Sun Mar 2 17:45:36 2003
@@ -199,8 +199,6 @@
/* In cardbus.c */
int cb_alloc(socket_info_t *s);
void cb_free(socket_info_t *s);
-void cb_enable(socket_info_t *s);
-void cb_disable(socket_info_t *s);
int read_cb_mem(socket_info_t *s, int space, u_int addr, u_int len, void *ptr);
void cb_release_cis_mem(socket_info_t *s);
-- Russell King (rmk@arm.linux.org.uk) The developer of ARM Linux http://www.arm.linux.org.uk/personal/aboutme.html- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/