--=_courier-7547-1046969457-0001-2
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Since about 2.5.60, the first 2.5 kernel that has built/booted for me, I've noticed X/Kscreensaver fails to capture a keystroke after about 20 minutes of inactivity, in the password login prompt. It is only the first keypress that is lost, all later keypresses work fine. I believe I've narrowed it down to an interaction with having ACPI enabled, as booting the kernel with 'acpi=off' seems to make the problem go away. I've attached dmesg and .config output. Please let me know if I can assist further.
Regards,
David Shepard
----=_courier-7547-1046969457-0001-2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.fullACPI"
Linux version 2.5.64 (root@davetop.wvuced.org) (gcc version 3.2.2) #1 Wed Mar 5 20:33:50 EST 2003 Video mode to be used for restore is 317 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data) BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 PTLTD ) @ 0x000f6ba0 ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x1fff5e36 ACPI: FADT (v001 IBM TP-A20M 01540.00000) @ 0x1fffeb65 ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x1fffebd9 ACPI: DSDT (v001 IBM TP A20m 01540.00000) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. Building zonelist for node : 0 Kernel command line: root=/dev/hda3 vga=791 Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 696.848 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1376.25 BogoMIPS Memory: 515028k/524224k available (2239k kernel code, 8452k reserved, 621k data, 148k init, 0k highmem) Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Failed to register 'sysfs' in sysfs -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030228 ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0._INI] (Node dffe3c20), AE_AML_NO_RETURN_VALUE ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: Power Resource [PSER] (off) ACPI: Power Resource [PSIO] (on) ACPI: Embedded Controller [EC] (gpe 9) Linux Plug and Play Support v0.95 (c) Adam Belay PnPBIOS: Found PnP BIOS installation structure at 0xc00f6c50 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb1d3, dseg 0x400 PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: ACPI BOOT descriptor is wrong length (39) SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available. Enabling SEP on CPU 0 aio_setup: sizeof(struct page) = 40 devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Capability LSM initialized Initializing Cryptographic API Limiting direct PCI/PCI transfers. ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states) ACPI: Thermal Zone [THM0] (65 C) Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled devfs_register(tts/1): could not append to parent, err: -17 tts/1 at I/O 0x2f8 (irq = 3) is a 16550A vesafb: framebuffer at 0xf5000000, mapped to 0xe081c000, size 8192k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:504c vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Console: switching to colour frame buffer device 128x48 Real Time Clock Driver v1.11 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected Intel 440BX chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xf8000000 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: loaded (max 8 devices) PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS05-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: CD-224E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 78140160 sectors (40008 MB) w/7898KiB Cache, CHS=77520/16/63, UDMA(33) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Console: switching to colour frame buffer device 128x48 Yenta IRQ list 00b8, PCI irq11 Socket status: 30000006 Yenta IRQ list 00b8, PCI irq11 Socket status: 30000020 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 uhci-hcd 00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 uhci-hcd 00:07.2: irq 11, io base 00001820 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: PC Speaker serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.0rc7 (Sat Feb 15 15:01:21 2003 UTC). cs46xx: failure waiting for FIFO command to complete hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 ALSA device list: #0: Sound Fusion CS46xx at 0xf4100000/0xf4000000, irq 11 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ACPI: (supports S0 S1 S3 S4 S5) hub 1-0:0: new USB device on port 1, assigned address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-00:07.2-1 cs: cb_alloc(bus 6): vendor 0x115d, device 0x0003 PCI: Enabling device 06:00.0 (0000 -> 0003) PCI: Setting latency timer of device 06:00.0 to 64 eth0: Xircom cardbus revision 3 at irq 11 PCI: Enabling device 06:00.1 (0000 -> 0003) tts/14 at I/O 0x3080 (irq = 11) is a 16550A found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide0(3,3), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3)) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 148k freed Adding 529160k swap on /dev/hda1. Priority:-1 extents:1 found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide0(3,2), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide0(3,2)) for (ide0(3,2)) Using r5 hash to sort names devfs_register(vcc/1): could not append to parent, err: -17 devfs_register(vcc/a1): could not append to parent, err: -17 devfs_register(vcc/1): could not append to parent, err: -17 devfs_register(vcc/a1): could not append to parent, err: -17 xircom cardbus adaptor found, registering as eth0, using irq 11 xircom_cb: Link status has changed xircom_cb: Link is 100 mbit spurious 8259A interrupt: IRQ7.
--=_courier-7547-1046969457-0001-2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.diff"
--- dmesg.fullACPI 2003-03-06 09:45:41.000000000 -0500 +++ dmesg.noACPI 2003-03-06 10:47:01.000000000 -0500 @@ -13,22 +13,15 @@ DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 -ACPI: RSDP (v000 PTLTD ) @ 0x000f6ba0 -ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x1fff5e36 -ACPI: FADT (v001 IBM TP-A20M 01540.00000) @ 0x1fffeb65 -ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x1fffebd9 -ACPI: DSDT (v001 IBM TP A20m 01540.00000) @ 0x00000000 -ACPI: BIOS passes blacklist -ACPI: MADT not present IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. Building zonelist for node : 0 -Kernel command line: root=/dev/hda3 vga=791 +Kernel command line: root=/dev/hda3 vga=791 acpi=off Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) -Detected 696.848 MHz processor. +Detected 696.836 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1376.25 BogoMIPS Memory: 515028k/524224k available (2239k kernel code, 8452k reserved, 621k data, 148k init, 0k highmem) @@ -64,24 +57,11 @@ biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030228 - ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0._INI] (Node dffe3c20), AE_AML_NO_RETURN_VALUE -ACPI: Interpreter enabled -ACPI: Using PIC for interrupt routing -ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) -ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) -ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11, disabled) -ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) -ACPI: PCI Root Bridge [PCI0] (00:00) -PCI: Probing PCI hardware (bus 00) -ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] -ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] -ACPI: Power Resource [PSER] (off) -ACPI: Power Resource [PSIO] (on) -ACPI: Embedded Controller [EC] (gpe 9) +ACPI: Disabled via command line (acpi=off) Linux Plug and Play Support v0.95 (c) Adam Belay PnPBIOS: Found PnP BIOS installation structure at 0xc00f6c50 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb1d3, dseg 0x400 -PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver +PnPBIOS: 21 nodes reported by PnP BIOS; 21 recorded by driver block request queues: 128 requests per read queue 128 requests per write queue @@ -92,9 +72,12 @@ options: [pci] [cardbus] [pm] drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub -ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 -PCI: Using ACPI for IRQ routing -PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' +ACPI: ACPI tables contain no PCI IRQ routing entries +PCI: Invalid ACPI-PCI IRQ routing table +PCI: Probing PCI hardware +PCI: Probing PCI hardware (bus 00) +PCI: Discovered primary peer bus 08 [IRQ] +PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 SBF: ACPI BOOT descriptor is wrong length (39) SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 @@ -106,18 +89,10 @@ Capability LSM initialized Initializing Cryptographic API Limiting direct PCI/PCI transfers. -ACPI: AC Adapter [AC] (on-line) -ACPI: Battery Slot [BAT0] (battery present) -ACPI: Battery Slot [BAT1] (battery absent) -ACPI: Power Button (FF) [PWRF] -ACPI: Lid Switch [LID] -ACPI: Sleep Button (CM) [SLPB] -ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states) -ACPI: Thermal Zone [THM0] (65 C) Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled devfs_register(tts/1): could not append to parent, err: -17 tts/1 at I/O 0x2f8 (irq = 3) is a 16550A -vesafb: framebuffer at 0xf5000000, mapped to 0xe081c000, size 8192k +vesafb: framebuffer at 0xf5000000, mapped to 0xe080d000, size 8192k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:504c vesafb: scrolling: redraw @@ -153,11 +128,16 @@ hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Console: switching to colour frame buffer device 128x48 -Yenta IRQ list 00b8, PCI irq11 +PCI: Found IRQ 11 for device 00:02.0 +PCI: Sharing IRQ 11 with 00:05.0 +PCI: Sharing IRQ 11 with 01:00.0 +Yenta IRQ list 06b8, PCI irq11 Socket status: 30000006 -Yenta IRQ list 00b8, PCI irq11 +PCI: Found IRQ 11 for device 00:02.1 +Yenta IRQ list 06b8, PCI irq11 Socket status: 30000020 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 +PCI: Found IRQ 11 for device 00:07.2 uhci-hcd 00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 uhci-hcd 00:07.2: irq 11, io base 00001820 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. @@ -172,6 +152,9 @@ input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.0rc7 (Sat Feb 15 15:01:21 2003 UTC). +PCI: Found IRQ 11 for device 00:05.0 +PCI: Sharing IRQ 11 with 00:02.0 +PCI: Sharing IRQ 11 with 01:00.0 cs46xx: failure waiting for FIFO command to complete hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 ALSA device list: @@ -180,7 +163,6 @@ IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -ACPI: (supports S0 S1 S3 S4 S5) hub 1-0:0: new USB device on port 1, assigned address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-00:07.2-1 cs: cb_alloc(bus 6): vendor 0x115d, device 0x0003
--=_courier-7547-1046969457-0001-2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=".config"
# # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_SWAP=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y
# # Code maturity level options # CONFIG_EXPERIMENTAL=y
# # General setup # CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14
# # Loadable module support # # CONFIG_MODULES is not set
# # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_PREFETCH=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set # CONFIG_X86_MCE_P4THERMAL is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y # CONFIG_X86_CPUID is not set # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y
# # Power management options (ACPI, APM) # CONFIG_PM=y CONFIG_SOFTWARE_SUSPEND=y
# # ACPI Support # CONFIG_ACPI=y # CONFIG_ACPI_HT_ONLY is not set CONFIG_ACPI_BOOT=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_APM is not set
# # CPU Frequency scaling # CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_PROC_INTF is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_24_API is not set CONFIG_CPU_FREQ_TABLE=y
# # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=y # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set # CONFIG_X86_GX_SUSPMOD is not set CONFIG_X86_SPEEDSTEP=y # CONFIG_X86_P4_CLOCKMOD is not set # CONFIG_X86_LONGRUN is not set # CONFIG_X86_LONGHAUL is not set
# # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_SCx200 is not set # CONFIG_PCI_LEGACY_PROC is not set CONFIG_PCI_NAMES=y # CONFIG_ISA is not set # CONFIG_MCA is not set CONFIG_HOTPLUG=y
# # PCMCIA/CardBus support # CONFIG_PCMCIA=y CONFIG_CARDBUS=y # CONFIG_I82092 is not set # CONFIG_I82365 is not set # CONFIG_TCIC is not set
# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set
# # Executable file formats # CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y
# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set
# # Parallel port support # # CONFIG_PARPORT is not set
# # Plug and Play support # CONFIG_PNP=y CONFIG_PNP_NAMES=y # CONFIG_PNP_CARD is not set # CONFIG_PNP_DEBUG is not set
# # Protocols # CONFIG_PNPBIOS=y
# # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_LBD is not set
# # ATA/ATAPI/MFM/RLL device support # CONFIG_IDE=y
# # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y
# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set
# # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_IDE_TCQ=y CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=y CONFIG_BLK_DEV_IDE_TCQ_DEPTH=32 # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_RZ1000 is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set CONFIG_BLK_DEV_IDE_MODES=y
# # SCSI device support # # CONFIG_SCSI is not set
# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set
# # Fusion MPT device support #
# # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set
# # I2O device support # # CONFIG_I2O is not set
# # Networking support # CONFIG_NET=y
# # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y # CONFIG_NETLINK_DEV is not set # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_XFRM_USER is not set # CONFIG_IPV6 is not set
# # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set
# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set
# # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y
# # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_ETHERTAP is not set
# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set
# # Tulip family network device support # CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set # CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set CONFIG_PCMCIA_XIRCOM=y # CONFIG_PCMCIA_XIRTULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set
# # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=y CONFIG_PPP_MULTILINK=y CONFIG_PPP_ASYNC=y # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=y CONFIG_PPP_BSDCOMP=y CONFIG_PPPOE=y # CONFIG_SLIP is not set
# # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set
# # Token Ring devices (depends on LLC=y) # # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set
# # Wan interfaces # # CONFIG_WAN is not set
# # PCMCIA network device support # # CONFIG_NET_PCMCIA is not set
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # IrDA (infrared) support # # CONFIG_IRDA is not set
# # ISDN subsystem # # CONFIG_ISDN_BOOL is not set
# # Telephony Support # # CONFIG_PHONE is not set
# # Input device support # CONFIG_INPUT=y
# # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set
# # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set
# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_UINPUT is not set
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set
# # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set # CONFIG_SERIAL_8250_CS is not set # CONFIG_SERIAL_8250_EXTENDED is not set
# # Non-8250 serial port support # CONFIG_SERIAL_CORE=y # CONFIG_UNIX98_PTYS is not set
# # I2C support # # CONFIG_I2C is not set
# # I2C Hardware Sensors Mainboard support #
# # I2C Hardware Sensors Chip support #
# # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set
# # IPMI # # CONFIG_IPMI_HANDLER is not set
# # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_INTEL_RNG is not set # CONFIG_AMD_RNG is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set
# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP3 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_VIA is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_ALI is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_AMD_8151 is not set # CONFIG_DRM is not set
# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set
# # Multimedia devices # # CONFIG_VIDEO_DEV is not set
# # File systems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y # CONFIG_JFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y # CONFIG_DEVFS_DEBUG is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_EXT2_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UFS_FS is not set # CONFIG_XFS_FS is not set
# # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_EXPORTFS is not set # CONFIG_CIFS is not set # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set # CONFIG_AFS_FS is not set CONFIG_ZISOFS_FS=y
# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y
# # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y
# # Graphics support # CONFIG_FB=y # CONFIG_FB_CLGEN is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y CONFIG_VIDEO_SELECT=y # CONFIG_FB_HGA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_VIRTUAL is not set
# # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_PCI_CONSOLE=y # CONFIG_FBCON_ADVANCED is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set
# # Sound # CONFIG_SOUND=y
# # Advanced Linux Sound Architecture # CONFIG_SND=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set
# # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set
# # PCI devices # # CONFIG_SND_ALI5451 is not set CONFIG_SND_CS46XX=y CONFIG_SND_CS46XX_NEW_DSP=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set
# # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set
# # Open Sound System # # CONFIG_SOUND_PRIME is not set
# # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set
# # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set
# # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y
# # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set
# # SCSI support is needed for USB Storage #
# # USB Human Interface Devices (HID) # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set
# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set
# # USB Multimedia devices # # CONFIG_USB_DABUSB is not set
# # Video4Linux support is needed for USB Multimedia device support #
# # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set
# # USB port drivers #
# # USB Serial Converter support # # CONFIG_USB_SERIAL is not set
# # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set
# # Bluetooth support # # CONFIG_BT is not set
# # Profiling support # # CONFIG_PROFILING is not set
# # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set # CONFIG_KALLSYMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_FRAME_POINTER is not set CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y
# # Security options # CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set
# # Cryptographic options # CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set CONFIG_CRYPTO_SERPENT=y # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_TEST is not set
# # Library routines # # CONFIG_CRC32 is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_X86_BIOS_REBOOT=y
--=_courier-7547-1046969457-0001-2--