Example:
------
]0;root@localhost:~[root@localhost root]# lspci -tv
-[00]-+-00.0 Intel Corp. e7500 DRAM Controller
+-00.1 Intel Corp. e7500 DRAM Controller Error Reporting
+-02.0-[01-04]--+-1c.0 Intel Corp. 82870P2 P64H2 I/OxAPIC
| +-1d.0-[02]--
| +-1e.0 Intel Corp. 82870P2 P64H2 I/OxAPIC
| \-1f.0-[03-04]----01.0-[04]--+-04.0 Digital
Equipment Corporation DECchip 21142/43
| +-05.0 Digital
Equipment Corporation DECchip 21142/43
| +-06.0 Digital
Equipment Corporation DECchip 21142/43
| \-07.0 Digital
Equipment Corporation DECchip 21142/43
+-03.0-[05-07]--+-1c.0 Intel Corp. 82870P2 P64H2 I/OxAPIC
| +-1d.0-[06]--+-01.0 Intel Corp.: Unknown device
100f
| | +-02.0 Intel Corp.: Unknown device
1010
| | \-02.1 Intel Corp.: Unknown device
1010
| +-1e.0 Intel Corp. 82870P2 P64H2 I/OxAPIC
| \-1f.0-[07]--
+-1d.0 Intel Corp. 82801CA/CAM USB (Hub
+-1d.1 Intel Corp. 82801CA/CAM USB (Hub
+-1d.2 Intel Corp. 82801CA/CAM USB (Hub
+-1e.0-[08]--+-01.0 ATI Technologies Inc Rage XL
| +-02.0 Intel Corp. 82557/8/9 [Ethernet Pro 100]
| \-03.0 Intel Corp. 82557/8/9 [Ethernet Pro 100]
+-1f.0 Intel Corp. 82801CA ISA Bridge (LPC)
+-1f.1 Intel Corp. 82801CA IDE U100
\-1f.3 Intel Corp. 82801CA/CAM SMBus
-------------
See those DECchip 21142/43 devices? They are about 3 layers down
from the root and theyll never work properly unless the BIOS is capable
of initializing everything. The first of the 4 devices will receive
interupts correctly, the rest dont.
-------
]0;root@localhost:~[root@localhost root]# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 441198 441826 442361 439749 IO-APIC-edge timer
1: 1 0 0 1 IO-APIC-edge keyboard
2: 0 0 0 0 XT-PIC cascade
4: 75 78 82 52 IO-APIC-edge serial
8: 1 0 0 0 IO-APIC-edge rtc
14: 2000 1787 1960 1535 IO-APIC-edge ide0
15: 1860 1750 2021 1603 IO-APIC-edge ide1
17: 3396 3440 3400 3415 IO-APIC-level eth0
18: 6 2 2 3 IO-APIC-level eth1
24: 5 3 5 3 IO-APIC-level eth5,
eth6, eth7, eth8
96: 426 424 425 424 IO-APIC-level eth2
100: 427 424 424 425 IO-APIC-level eth3
101: 425 424 425 423 IO-APIC-level eth4
NMI: 0 0 0 0
LOC: 1762876 1762850 1762971 1762970
ERR: 0
MIS: 0
--------------
Interupt routing as can be seen above is really messed for that device.
The workaround is to move the board so the the DECchip 21142/43 devices
are at a depth not to exceed 3.
Seems this has been an ongoing problem on Linux.
http://www.tux.org/hypermail/linux-tulip/2002-Aug/0000.html
The above is the same motherboard as mentioned in the thread above except
the two processors have hyperthreading capability.
Q1: How do we resolve this other than moving around boards?
Q2: Should we really be dependent on bios this bad?
According to that thread things dont work on the BSDs either but work fine
on WinXP (shudder). Does this mean winxp doesnt depend on BIOS?
Should we really be dependent on the BIOS this much?
Shouldnt things like second level pci bridge be part of Linux discovery?
cheers,
jamal
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/