> This is S4bios support for 2.5.63. I'd like to see it in since it is
> easier to understand and more foolproof. Please apply,
Pavel,
Since 2.5.61 at least swsusp doesn't work here, with or without S4bios. It
lists a heap of processes entering the refrigerator, then prints '=|' and
moves one line downwards, cursor blinking on an empty line.
Nothing appears to happen then, except that if I press alt-f7, my screen
blanks as if X is still partly alive. Alt-SysRQ also works and shows heaps
of processes, most of them with 'refrigerator' somewhere in their traceback.
Nothing is written to disk however.
I try to suspend with "echo 4 > /proc/acpi/sleep".
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bff8000 (ACPI data)
BIOS-e820: 000000000bff8000 - 000000000c000000 (ACPI NVS)
BIOS-e820: 00000000ffef0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
191MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 49136
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 45040 pages, LIFO batch:10
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 AMI ) @ 0x000fc740
ACPI: RSDT (v001 AMIINT AMIINT09 00000.04096) @ 0x0bff0000
ACPI: FADT (v001 AMIINT AMIINT09 00000.04096) @ 0x0bff0030
ACPI: DSDT (v001 SiS 630 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
Building zonelist for node : 0
Kernel command line: root=/dev/hda1 resume=/dev/hda2
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1096.985 MHz processor.
-- biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030122 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:............................................................................................................................... Table [DSDT] - 419 Objects with 37 Devices 127 Methods 20 Regions ACPI Namespace successfully loaded at root c040eb9c evxfevnt-0092 [04] acpi_enable : Transition to ACPI mode successful Executing all Device _STA and_INI methods:..................................... 37 Devices found containing: 37 _STA, 1 _INI methods Completing Region/Field/Buffer/Package initialization:................................................................ Initialized 16/20 Regions 0/0 Fields 29/29 Buffers 19/19 Packages (419 nodes) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 11) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [URP1] (off) pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0 ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 7 11 12 14 15, disabled) pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0 ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10 12 14 15, disabled) pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0 ACPI: PCI Interrupt Link [LNKD] (IRQs 11, disabled) ACPI: Power Resource [FN10] (on) block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' NET4: Frame Diverter 0.46 Enabling SEP on CPU 0 aio_setup: sizeof(struct page) = 40 Journalled Block Device driver loaded devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API ACPI: AC Adapter [AC0] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Lid Switch [LIDD] ACPI: Sleep Button (CM) [SLPB] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN1] (off) ACPI: Processor [CPU1] (supports C1 C2, 8 throttling states) exfldio-0140 [25] ex_setup_region : Field [TMPS] Base+Offset+Width 4+0+4 is beyond end of region [M4D0] (length 6) psparse-1121: *** Error: Method execution failed [\_TZ_.THRM._TMP] (Node cbf11148), AE_AML_REGION_LIMIT Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled tts/0 at I/O 0x3f8 (irq = 4) is a 16550A tts/1 at I/O 0x2f8 (irq = 3) is a 16550A-- Initializing IPsec netlink socket NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ACPI: (supports S0 S1 S4 S5)
.config: # egrep -i 'acpi|susp' /mnt/linux-2.5.63/.config # Power management options (ACPI, APM) CONFIG_SOFTWARE_SUSPEND=y # ACPI Support CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_TOSHIBA=y CONFIG_ACPI_DEBUG=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y
If you have further questions about my configuration, just let me know.
Regards,
bert
-- http://www.PowerDNS.com Open source, database driven DNS Software http://lartc.org Linux Advanced Routing & Traffic Control HOWTO http://netherlabs.nl Consulting - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/