SCSI host adapter support.
- Osamu Tomita
diff -Nru linux-2.5.60/drivers/scsi/Kconfig linux98-2.5.60/drivers/scsi/Kconfig
--- linux-2.5.60/drivers/scsi/Kconfig 2003-02-11 03:38:53.000000000 +0900
+++ linux98-2.5.60/drivers/scsi/Kconfig 2003-02-11 13:27:06.000000000 +0900
@@ -1729,6 +1729,13 @@
see the picture at
<http://amiga.multigraph.com/photos/oktagon.html>.
+config SCSI_PC980155
+ tristate "NEC PC-9801-55 SCSI support"
+ depends on X86_PC9800 && SCSI
+ help
+ If you have the NEC PC-9801-55 SCSI interface card or compatibles
+ for NEC PC-9801/PC-9821, say Y.
+
# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
# bool 'GVP Turbo 040/060 SCSI support (EXPERIMENTAL)' CONFIG_GVP_TURBO_SCSI
endmenu
diff -Nru linux-2.5.60/drivers/scsi/Makefile linux98-2.5.60/drivers/scsi/Makefile
--- linux-2.5.60/drivers/scsi/Makefile 2003-02-11 03:38:49.000000000 +0900
+++ linux98-2.5.60/drivers/scsi/Makefile 2003-02-11 13:27:06.000000000 +0900
@@ -29,6 +29,7 @@
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
+obj-$(CONFIG_SCSI_PC980155) += pc980155.o wd33c93.o
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o
@@ -121,10 +122,17 @@
obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o
obj-$(CONFIG_CHR_DEV_SG) += sg.o
-scsi_mod-objs := scsi.o hosts.o scsi_ioctl.o constants.o scsicam.o \
+scsi_mod-objs := scsi.o hosts.o scsi_ioctl.o constants.o \
scsi_error.o scsi_lib.o scsi_scan.o scsi_syms.o \
scsi_sysfs.o
+ifneq ($(CONFIG_X86_PC9800),y)
+scsi_mod-objs += scsicam.o
+else
+export-objs += wd33c93.o
+scsi_mod-objs += scsicam98.o
+endif
+
ifdef CONFIG_PROC_FS
scsi_mod-objs += scsi_proc.o
endif
diff -Nru linux/drivers/scsi/pc980155.c linux98/drivers/scsi/pc980155.c
--- linux/drivers/scsi/pc980155.c 1970-01-01 09:00:00.000000000 +0900
+++ linux98/drivers/scsi/pc980155.c 2002-12-15 12:09:04.000000000 +0900
@@ -0,0 +1,263 @@
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/blk.h>
+#include <linux/sched.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <linux/module.h>
+
+#include "scsi.h"
+#include "hosts.h"
+#include "wd33c93.h"
+#include "pc980155.h"
+#include "pc980155regs.h"
+
+#define DEBUG
+
+#include<linux/stat.h>
+
+static inline void __print_debug_info(unsigned int);
+static inline void __print_debug_info(unsigned int a){}
+#define print_debug_info() __print_debug_info(base_io);
+
+#define NR_BASE_IOS 4
+static int nr_base_ios = NR_BASE_IOS;
+static unsigned int base_ios[NR_BASE_IOS] = {0xcc0, 0xcd0, 0xce0, 0xcf0};
+static unsigned int SASR;
+static unsigned int SCMD;
+static wd33c93_regs regs = {&SASR, &SCMD};
+
+static struct Scsi_Host *pc980155_host = NULL;
+
+static void pc980155_intr_handle(int irq, void *dev_id, struct pt_regs *regp);
+
+inline void pc980155_dma_enable(unsigned int base_io){
+ outb(0x01, REG_CWRITE);
+ WAIT();
+}
+inline void pc980155_dma_disable(unsigned int base_io){
+ outb(0x02, REG_CWRITE);
+ WAIT();
+}
+
+
+static void pc980155_intr_handle(int irq, void *dev_id, struct pt_regs *regp)
+{
+ wd33c93_intr(pc980155_host);
+}
+
+static int dma_setup(Scsi_Cmnd *sc, int dir_in){
+ /*
+ * sc->SCp.this_residual : transfer count
+ * sc->SCp.ptr : distination address (virtual address)
+ * dir_in : data direction (DATA_OUT_DIR:0 or DATA_IN_DIR:1)
+ *
+ * if success return 0
+ */
+
+ /*
+ * DMA WRITE MODE
+ * bit 7,6 01b single mode (this mode only)
+ * bit 5 inc/dec (default:0 = inc)
+ * bit 4 auto initialize (normaly:0 = off)
+ * bit 3,2 01b memory -> io
+ * 10b io -> memory
+ * 00b verify
+ * bit 1,0 channel
+ */
+ disable_dma(sc->host->dma_channel);
+ set_dma_mode(sc->host->dma_channel, 0x40 | (dir_in ? 0x04 : 0x08));
+ clear_dma_ff(sc->host->dma_channel);
+ set_dma_addr(sc->host->dma_channel, virt_to_phys(sc->SCp.ptr));
+ set_dma_count(sc->host->dma_channel, sc->SCp.this_residual);
+#if 0
+#ifdef DEBUG
+ printk("D%d(%x)D", sc->SCp.this_residual);
+#endif
+#endif
+ enable_dma(sc->host->dma_channel);
+
+ pc980155_dma_enable(sc->host->io_port);
+
+ return 0;
+}
+
+static void dma_stop(struct Scsi_Host *instance, Scsi_Cmnd *sc, int status){
+ /*
+ * instance: Hostadapter's instance
+ * sc: scsi command
+ * status: True if success
+ */
+
+ pc980155_dma_disable(sc->host->io_port);
+
+ disable_dma(sc->host->dma_channel);
+}
+
+/* return non-zero on detection */
+static inline int pc980155_test_port(wd33c93_regs regs)
+{
+ /* Quick and dirty test for presence of the card. */
+ if (READ_AUX_STAT() == 0xff)
+ return 0;
+ return 1;
+}
+
+static inline int
+pc980155_getconfig(unsigned int base_io, wd33c93_regs regs,
+ unsigned char* irq, unsigned char* dma,
+ unsigned char* scsi_id)
+{
+ static unsigned char irqs[] = { 3, 5, 6, 9, 12, 13 };
+ unsigned char result;
+
+ printk(KERN_DEBUG "PC-9801-55: base_io=%x SASR=%x SCMD=%x\n",
+ base_io, *regs.SASR, *regs.SCMD);
+ result = read_wd33c93(regs, WD_RESETINT);
+ printk(KERN_DEBUG "PC-9801-55: getting config (%x)\n", result);
+ *scsi_id = result & 0x07;
+ *irq = (result >> 3) & 0x07;
+ if (*irq > 5) {
+ printk(KERN_ERR "PC-9801-55 (base %#x): impossible IRQ (%d)"
+ " - other device here?\n", base_io, *irq);
+ return 0;
+ }
+
+ *irq = irqs[*irq];
+ result = inb(REG_STATRD);
+ WAIT();
+ *dma = result & 0x03;
+ if (*dma == 1) {
+ printk(KERN_ERR
+ "PC-9801-55 (base %#x): impossible DMA channl (%d)"
+ " - other device here?\n", base_io, *dma);
+ return 0;
+ }
+#ifdef DEBUG
+ printk("PC-9801-55: end of getconfig\n");
+#endif
+ return 1;
+}
+
+/* return non-zero on detection */
+int scsi_pc980155_detect(Scsi_Host_Template* tpnt)
+{
+ unsigned int base_io;
+ unsigned char irq, dma, scsi_id;
+ int i;
+#ifdef DEBUG
+ unsigned char debug;
+#endif
+
+ for (i = 0; i < nr_base_ios; i++) {
+ base_io = base_ios[i];
+ SASR = REG_ADDRST;
+ SCMD = REG_CONTRL;
+
+ /* printk("PC-9801-55: SASR(%x = %x)\n", SASR, REG_ADDRST); */
+ if (check_region(base_io, 6))
+ continue;
+ if (! pc980155_test_port(regs))
+ continue;
+
+ if (!pc980155_getconfig(base_io, regs, &irq, &dma, &scsi_id))
+ continue;
+#ifdef DEBUG
+ printk("PC-9801-55: config: base io = %x, irq = %d, dma channel = %d, scsi id = %d\n",
+ base_io, irq, dma, scsi_id);
+#endif
+ if (request_irq(irq, pc980155_intr_handle, 0, "PC-9801-55",
+ NULL)) {
+ printk(KERN_ERR
+ "PC-9801-55: unable to allocate IRQ %d\n",
+ irq);
+ continue;
+ }
+ if (request_dma(dma, "PC-9801-55")) {
+ printk(KERN_ERR "PC-9801-55: "
+ "unable to allocate DMA channel %d\n", dma);
+ free_irq(irq, NULL);
+ continue;
+ }
+
+ request_region(base_io, 6, "PC-9801-55");
+ pc980155_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
+ pc980155_host->this_id = scsi_id;
+ pc980155_host->io_port = base_io;
+ pc980155_host->n_io_port = 6;
+ pc980155_host->irq = irq;
+ pc980155_host->dma_channel = dma;
+
+#ifdef DEBUG
+ printk("PC-9801-55: scsi host found at %x irq = %d, use dma channel %d.\n", base_io, irq, dma);
+ debug = read_aux_stat(regs);
+ printk("PC-9801-55: aux: %x ", debug);
+ debug = read_wd33c93(regs, 0x17);
+ printk("status: %x\n", debug);
+#endif
+
+ pc980155_int_enable(regs);
+
+ wd33c93_init(pc980155_host, regs, dma_setup, dma_stop,
+ WD33C93_FS_12_15);
+
+ return 1;
+ }
+
+ printk("PC-9801-55: not found\n");
+ return 0;
+}
+
+int pc980155_proc_info(char *buf, char **start, off_t off, int len,
+ int hostno, int in)
+{
+ /* NOT SUPPORTED YET! */
+
+ if (in) {
+ return -EPERM;
+ }
+ *start = buf;
+ return sprintf(buf, "Sorry, not supported yet.\n");
+}
+
+int pc980155_setup(char *str)
+{
+next:
+ if (!strncmp(str, "io:", 3)){
+ base_ios[0] = simple_strtoul(str+3,NULL,0);
+ nr_base_ios = 1;
+ while (*str > ' ' && *str != ',')
+ str++;
+ if (*str == ','){
+ str++;
+ goto next;
+ }
+ }
+ return 0;
+}
+
+int scsi_pc980155_release(struct Scsi_Host *pc980155_host)
+{
+#ifdef MODULE
+ pc980155_int_disable(regs);
+ release_region(pc980155_host->io_port, pc980155_host->n_io_port);
+ free_irq(pc980155_host->irq, NULL);
+ free_dma(pc980155_host->dma_channel);
+ wd33c93_release();
+#endif
+ return 1;
+}
+
+__setup("pc980155=", pc980155_setup);
+
+Scsi_Host_Template driver_template = SCSI_PC980155;
+
+#include "scsi_module.c"
diff -Nru linux/drivers/scsi/pc980155.h linux98/drivers/scsi/pc980155.h
--- linux/drivers/scsi/pc980155.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/drivers/scsi/pc980155.h 2002-12-15 12:05:05.000000000 +0900
@@ -0,0 +1,47 @@
+/*
+ * PC-9801-55 SCSI host adapter driver
+ *
+ * Copyright (C) 1997-2000 Kyoto University Microcomputer Club
+ * (Linux/98 project)
+ */
+
+#ifndef _SCSI_PC9801_55_H
+#define _SCSI_PC9801_55_H
+
+#include <linux/types.h>
+#include <linux/kdev_t.h>
+#include <scsi/scsicam.h>
+
+int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+int wd33c93_abort(Scsi_Cmnd *);
+int wd33c93_reset(Scsi_Cmnd *, unsigned int);
+int scsi_pc980155_detect(Scsi_Host_Template *);
+int scsi_pc980155_release(struct Scsi_Host *);
+int pc980155_proc_info(char *, char **, off_t, int, int, int);
+
+#ifndef CMD_PER_LUN
+#define CMD_PER_LUN 2
+#endif
+
+#ifndef CAN_QUEUE
+#define CAN_QUEUE 16
+#endif
+
+#define SCSI_PC980155 { .proc_name = "PC-9801-55", \
+ .name = "SCSI PC-9801-55", \
+ .proc_info = pc980155_proc_info, \
+ .detect = scsi_pc980155_detect, \
+ .release = scsi_pc980155_release, \
+ /* command: use queue command */ \
+ .queuecommand = wd33c93_queuecommand, \
+ .abort = wd33c93_abort, \
+ .reset = wd33c93_reset, \
+ .bios_param = scsicam_bios_param, \
+ .can_queue = CAN_QUEUE, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = CMD_PER_LUN, /* dont use link command */ \
+ .unchecked_isa_dma = 1, /* use dma **XXXX***/ \
+ .use_clustering = ENABLE_CLUSTERING }
+
+#endif /* _SCSI_PC9801_55_H */
diff -Nru linux/drivers/scsi/pc980155regs.h linux98/drivers/scsi/pc980155regs.h
--- linux/drivers/scsi/pc980155regs.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/drivers/scsi/pc980155regs.h 2001-12-03 18:44:10.000000000 +0900
@@ -0,0 +1,89 @@
+#ifndef __PC980155REGS_H
+#define __PC980155REGS_H
+
+#include "wd33c93.h"
+
+#define REG_ADDRST (base_io+0)
+#define REG_CONTRL (base_io+2)
+#define REG_CWRITE (base_io+4)
+#define REG_STATRD (base_io+4)
+
+#define WD_MEMORYBANK 0x30
+#define WD_RESETINT 0x33
+
+#if 0
+#define WAIT() outb(0x00,0x5f)
+#else
+#define WAIT() do{}while(0)
+#endif
+
+static inline uchar read_wd33c93(const wd33c93_regs regs, uchar reg_num)
+{
+ uchar data;
+ outb(reg_num, *regs.SASR);
+ WAIT();
+ data = inb(*regs.SCMD);
+ WAIT();
+ return data;
+}
+
+static inline uchar read_aux_stat(const wd33c93_regs regs)
+{
+ uchar result;
+ result = inb(*regs.SASR);
+ WAIT();
+ /* printk("PC-9801-55: regp->SASR(%x) = %x\n", regp->SASR, result); */
+ return result;
+}
+#define READ_AUX_STAT() read_aux_stat(regs)
+
+static inline void write_wd33c93(const wd33c93_regs regs, uchar reg_num,
+ uchar value)
+{
+ outb(reg_num, *regs.SASR);
+ WAIT();
+ outb(value, *regs.SCMD);
+ WAIT();
+}
+
+
+#define write_wd33c93_cmd(regs,cmd) write_wd33c93(regs,WD_COMMAND,cmd)
+
+static inline void write_wd33c93_count(const wd33c93_regs regs,
+ unsigned long value)
+{
+ outb(WD_TRANSFER_COUNT_MSB, *regs.SASR);
+ WAIT();
+ outb((value >> 16) & 0xff, *regs.SCMD);
+ WAIT();
+ outb((value >> 8) & 0xff, *regs.SCMD);
+ WAIT();
+ outb( value & 0xff, *regs.SCMD);
+ WAIT();
+}
+
+
+static inline unsigned long read_wd33c93_count(const wd33c93_regs regs)
+{
+unsigned long value;
+
+ outb(WD_TRANSFER_COUNT_MSB, *regs.SASR);
+ value = inb(*regs.SCMD) << 16;
+ value |= inb(*regs.SCMD) << 8;
+ value |= inb(*regs.SCMD);
+ return value;
+}
+
+static inline void write_wd33c93_cdb(const wd33c93_regs regs, unsigned int len,
+ unsigned char cmnd[])
+{
+ int i;
+ outb(WD_CDB_1, *regs.SASR);
+ for (i=0; i<len; i++)
+ outb(cmnd[i], *regs.SCMD);
+}
+
+#define pc980155_int_enable(regs) write_wd33c93(regs, WD_MEMORYBANK, read_wd33c93(regs, WD_MEMORYBANK) | 0x04)
+#define pc980155_int_disable(regs) write_wd33c93(regs, WD_MEMORYBANK, read_wd33c93(regs, WD_MEMORYBANK) & ~0x04)
+
+#endif
diff -Nru linux/drivers/scsi/scsi_scan.c linux98/drivers/scsi/scsi_scan.c
--- linux/drivers/scsi/scsi_scan.c 2002-12-24 14:21:04.000000000 +0900
+++ linux98/drivers/scsi/scsi_scan.c 2002-12-26 14:28:56.000000000 +0900
@@ -128,6 +128,7 @@
{"MITSUMI", "CD-R CR-2201CS", "6119", BLIST_NOLUN}, /* locks up */
{"RELISYS", "Scorpio", NULL, BLIST_NOLUN}, /* responds to all lun */
{"MICROTEK", "ScanMaker II", "5.61", BLIST_NOLUN}, /* responds to all lun */
+ {"NEC", "D3856", "0009", BLIST_NOLUN},
/*
* Other types of devices that have special flags.
diff -Nru linux-2.5.60/drivers/scsi/scsi_syms.c linux98-2.5.60/drivers/scsi/scsi_syms.c
--- linux-2.5.60/drivers/scsi/scsi_syms.c 2003-02-11 03:38:37.000000000 +0900
+++ linux98-2.5.60/drivers/scsi/scsi_syms.c 2003-02-11 13:27:06.000000000 +0900
@@ -94,6 +94,10 @@
EXPORT_SYMBOL(scsi_host_put);
EXPORT_SYMBOL(scsi_device_types);
+/* For PC-9800 architecture support */
+extern struct scsi_device *sd_find_params_by_bdev(struct block_device *, char **, sector_t *);
+EXPORT_SYMBOL(sd_find_params_by_bdev);
+
/*
* This is for st to find the bounce limit
*/
diff -Nru linux/drivers/scsi/scsicam98.c linux98/drivers/scsi/scsicam98.c
--- linux/drivers/scsi/scsicam98.c 1970-01-01 09:00:00.000000000 +0900
+++ linux98/drivers/scsi/scsicam98.c 2002-12-14 14:55:28.000000000 +0900
@@ -0,0 +1,192 @@
+/*
+ *
+ * scsicam98.c
+ * SCSI CAM support functions for NEC PC-9801 , use for HDIO_GETGEO, etc.
+ *
+ * Copyright (c) 1999-2002 Osamu Tomita <tomita@cinet.co.jp>
+ * Based on scsicam.c written by Drew Eckhardt
+ *
+ */
+
+#include <linux/module.h>
+
+#include <linux/fs.h>
+#include <linux/genhd.h>
+#include <linux/kernel.h>
+#include <linux/blk.h>
+#include <linux/buffer_head.h>
+#include <asm/unaligned.h>
+#include "scsi.h"
+#include "hosts.h"
+#include <scsi/scsicam.h>
+#include <asm/pc9800.h>
+
+
+unsigned char *scsi_bios_ptable(struct block_device *dev)
+{
+ unsigned char *res = kmalloc(66, GFP_KERNEL);
+ if (res) {
+ struct block_device *bdev = dev->bd_contains;
+ struct buffer_head *bh = __bread(bdev, 0, block_size(bdev));
+ if (bh) {
+ memcpy(res, bh->b_data + 0x1be, 66);
+ brelse(bh);
+ } else {
+ kfree(res);
+ res = NULL;
+ }
+ }
+ return res;
+}
+
+/*
+ * Function : static int scsi_partsize(unsigned char *buf, unsigned long
+ * capacity,unsigned int *cyls, unsigned int *hds, unsigned int *secs);
+ *
+ * Purpose : to determine the BIOS mapping used to create the partition
+ * table, storing the results in *cyls, *hds, and *secs
+ *
+ * Returns : -1 on failure, 0 on success.
+ *
+ */
+
+int scsi_partsize(unsigned char *buf, unsigned long capacity,
+ unsigned int *cyls, unsigned int *hds, unsigned int *secs)
+{
+ struct partition *p = (struct partition *)buf, *largest = NULL;
+ int i, largest_cyl;
+ int cyl, ext_cyl, end_head, end_cyl, end_sector;
+ unsigned int logical_end, physical_end, ext_physical_end;
+
+
+ if (*(unsigned short *) (buf + 64) == 0xAA55) {
+ for (largest_cyl = -1, i = 0; i < 4; ++i, ++p) {
+ if (!p->sys_ind)
+ continue;
+#ifdef DEBUG
+ printk("scsicam98 : partition %d has system \n", i);
+#endif
+ cyl = p->cyl + ((p->sector & 0xc0) << 2);
+ if (cyl > largest_cyl) {
+ largest_cyl = cyl;
+ largest = p;
+ }
+ }
+ }
+ if (largest) {
+ end_cyl = largest->end_cyl + ((largest->end_sector & 0xc0) << 2);
+ end_head = largest->end_head;
+ end_sector = largest->end_sector & 0x3f;
+
+ if (end_head + 1 == 0 || end_sector == 0)
+ return -1;
+
+#ifdef DEBUG
+ printk("scsicam98 : end at h = %d, c = %d, s = %d\n",
+ end_head, end_cyl, end_sector);
+#endif
+
+ physical_end = end_cyl * (end_head + 1) * end_sector +
+ end_head * end_sector + end_sector;
+
+ /* This is the actual _sector_ number at the end */
+ logical_end = get_unaligned(&largest->start_sect)
+ + get_unaligned(&largest->nr_sects);
+
+ /* This is for >1023 cylinders */
+ ext_cyl = (logical_end - (end_head * end_sector + end_sector))
+ / (end_head + 1) / end_sector;
+ ext_physical_end = ext_cyl * (end_head + 1) * end_sector +
+ end_head * end_sector + end_sector;
+
+#ifdef DEBUG
+ printk("scsicam98 : logical_end=%d physical_end=%d ext_physical_end=%d ext_cyl=%d\n"
+ ,logical_end, physical_end, ext_physical_end, ext_cyl);
+#endif
+
+ if ((logical_end == physical_end) ||
+ (end_cyl == 1023 && ext_physical_end == logical_end)) {
+ *secs = end_sector;
+ *hds = end_head + 1;
+ *cyls = capacity / ((end_head + 1) * end_sector);
+ return 0;
+ }
+#ifdef DEBUG
+ printk("scsicam98 : logical (%u) != physical (%u)\n",
+ logical_end, physical_end);
+#endif
+ }
+ return -1;
+}
+
+/* XXX - For now, we assume the first (i.e. having the least host_no)
+ real (i.e. non-emulated) host adapter shall be BIOS-controlled one.
+ We *SHOULD* invent another way. */
+
+static inline struct Scsi_Host *first_real_host(void)
+{
+ struct Scsi_Host *h = NULL;
+
+ while ((h = scsi_host_get_next(h)))
+ if (!h->hostt->emulated)
+ break;
+
+ return h;
+}
+
+extern struct scsi_device *sd_find_params_by_bdev(struct block_device *, char **, sector_t *);
+
+/*
+ * Function : int scsicam_bios_param (struct block_device *bdev, ector_t capacity, int *ip)
+ *
+ * Purpose : to determine the BIOS mapping used for a drive in a
+ * SCSI-CAM system, storing the results in ip as required
+ * by the HDIO_GETGEO ioctl().
+ *
+ * Returns : -1 on failure, 0 on success.
+ *
+ */
+
+int scsicam_bios_param(struct block_device *bdev, sector_t capacity, int *ip)
+{
+ char *name;
+ struct scsi_device *device = sd_find_params_by_bdev(bdev, &name, NULL);
+
+ if (device && first_real_host() == device->host && device->id < 7
+ && __PC9800SCA_TEST_BIT(PC9800SCA_DISK_EQUIPS, device->id))
+ {
+ const u8 *p = (&__PC9800SCA(u8, PC9800SCA_SCSI_PARAMS)
+ + device->id * 4);
+
+ ip[0] = p[1]; /* # of heads */
+ ip[1] = p[0]; /* # of sectors/track */
+ ip[2] = *(u16 *)&p[2] & 0x0FFF; /* # of cylinders */
+ if (p[3] & (1 << 6)) { /* #-of-cylinders is 16-bit */
+ ip[2] |= (ip[0] & 0xF0) << 8;
+ ip[0] &= 0x0F;
+ }
+ printk(KERN_INFO "%s: "
+ "BIOS parameters CHS:%d/%d/%d, %u bytes %s sector\n",
+ name, ip[2], ip[0], ip[1], 256 << ((p[3] >> 4) & 3),
+ p[3] & 0x80 ? "hard" : "soft");
+ return 0;
+ }
+
+ /* Assume PC-9801-92 compatible parameters for HAs without BIOS. */
+ ip[0] = 8;
+ ip[1] = 32;
+ ip[2] = capacity / (8 * 32);
+ if (ip[2] > 65535) { /* if capacity >= 8GB */
+ /* Recent on-board adapters seem to use this parameter. */
+ ip[1] = 128;
+ ip[2] = capacity / (8 * 128);
+ if (ip[2] > 65535) { /* if capacity >= 32GB */
+ /* Clip the number of cylinders. Currently this
+ is the limit that we deal with. */
+ ip[2] = 65535;
+ }
+ }
+ printk(KERN_INFO "%s: BIOS parameters CHS:%d/%d/%d (assumed)\n",
+ name, ip[2], ip[0], ip[1]);
+ return 0;
+}
diff -Nru linux/drivers/scsi/sd.c linux98/drivers/scsi/sd.c
--- linux/drivers/scsi/sd.c 2003-01-14 14:59:09.000000000 +0900
+++ linux98/drivers/scsi/sd.c 2003-01-14 23:19:49.000000000 +0900
@@ -480,7 +480,7 @@
diskinfo[2] = sdkp->capacity >> 11;
/* override with calculated, extended default, or driver values */
- if (host->hostt->bios_param)
+ if (!pc98 && host->hostt->bios_param)
host->hostt->bios_param(sdp, bdev, sdkp->capacity, diskinfo);
else
scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
@@ -1377,6 +1377,27 @@
kfree(sdkp);
}
+struct scsi_device *sd_find_params_by_bdev(struct block_device *bdev, char **disk_name, sector_t *capacity)
+{
+ struct scsi_disk *sdkp;
+ int major = major(to_kdev_t(bdev->bd_dev));
+
+ spin_lock(&sd_devlist_lock);
+ list_for_each_entry(sdkp, &sd_devlist, list) {
+ if (sdkp->disk->major == major) {
+ if (capacity)
+ *capacity = sdkp->capacity;
+ if (disk_name)
+ *disk_name = sdkp->disk->disk_name;
+ spin_unlock(&sd_devlist_lock);
+ return sdkp->device;
+ }
+ }
+
+ spin_unlock(&sd_devlist_lock);
+ return NULL;
+}
+
/**
* init_sd - entry point for this driver (both when built in or when
* a module).
diff -Nru linux/drivers/scsi/wd33c93.c linux98/drivers/scsi/wd33c93.c
--- linux/drivers/scsi/wd33c93.c 2003-01-02 12:22:29.000000000 +0900
+++ linux98/drivers/scsi/wd33c93.c 2003-01-04 16:17:32.000000000 +0900
@@ -84,6 +84,7 @@
#include <linux/init.h>
#include <asm/irq.h>
#include <linux/blk.h>
+#include <linux/spinlock.h>
#include "scsi.h"
#include "hosts.h"
@@ -173,7 +174,11 @@
MODULE_PARM(setup_strings, "s");
#endif
+static spinlock_t wd_lock = SPIN_LOCK_UNLOCKED;
+#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE)
+#include "pc980155regs.h"
+#else /* !CONFIG_SCSI_PC980155 */
static inline uchar read_wd33c93(const wd33c93_regs regs, uchar reg_num)
{
@@ -203,6 +208,7 @@
*regs.SCMD = cmd;
mb();
}
+#endif /* CONFIG_SCSI_PC980155 */
static inline uchar read_1_byte(const wd33c93_regs regs)
@@ -220,6 +226,7 @@
return x;
}
+#if !defined(CONFIG_SCSI_PC980155) && !defined(CONFIG_SCSI_PC980155_MODULE)
static void write_wd33c93_count(const wd33c93_regs regs, unsigned long value)
{
@@ -244,6 +251,7 @@
mb();
return value;
}
+#endif /* !CONFIG_SCSI_PC980155 */
/* The 33c93 needs to be told which direction a command transfers its
@@ -426,7 +434,6 @@
struct WD33C93_hostdata *hostdata = (struct WD33C93_hostdata *)instance->hostdata;
const wd33c93_regs regs = hostdata->regs;
Scsi_Cmnd *cmd, *prev;
-int i;
DB(DB_EXECUTE,printk("EX("))
@@ -589,9 +596,16 @@
* (take advantage of auto-incrementing)
*/
- *regs.SASR = WD_CDB_1;
- for (i=0; i<cmd->cmd_len; i++)
- *regs.SCMD = cmd->cmnd[i];
+#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE)
+ write_wd33c93_cdb(regs, cmd->cmd_len, cmd->cmnd);
+#else /* !CONFIG_SCSI_PC980155 */
+ {
+ int i;
+ *regs.SASR = WD_CDB_1;
+ for (i = 0; i < cmd->cmd_len; i++)
+ *regs.SCMD = cmd->cmnd[i];
+ }
+#endif /* CONFIG_SCSI_PC980155 */
/* The wd33c93 only knows about Group 0, 1, and 5 commands when
* it's doing a 'select-and-transfer'. To be safe, we write the
@@ -1703,7 +1717,7 @@
return 1;
}
-__setup("wd33c93", wd33c93_setup);
+__setup("wd33c93=", wd33c93_setup);
/* check_setup_args() returns index if key found, 0 if not
@@ -2037,4 +2051,10 @@
{
}
+EXPORT_SYMBOL(wd33c93_reset);
+EXPORT_SYMBOL(wd33c93_init);
+EXPORT_SYMBOL(wd33c93_release);
+EXPORT_SYMBOL(wd33c93_abort);
+EXPORT_SYMBOL(wd33c93_queuecommand);
+EXPORT_SYMBOL(wd33c93_intr);
MODULE_LICENSE("GPL");
diff -Nru linux/drivers/scsi/wd33c93.h linux98/drivers/scsi/wd33c93.h
--- linux/drivers/scsi/wd33c93.h 2002-10-12 13:21:35.000000000 +0900
+++ linux98/drivers/scsi/wd33c93.h 2002-10-12 14:18:53.000000000 +0900
@@ -186,8 +186,13 @@
/* This is what the 3393 chip looks like to us */
typedef struct {
+#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE)
+ volatile unsigned int *SASR;
+ volatile unsigned int *SCMD;
+#else
volatile unsigned char *SASR;
volatile unsigned char *SCMD;
+#endif
} wd33c93_regs;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/