[PATCHSET] PC-9800 subarch. support for 2.5.60 (25/34) parport

Osamu Tomita (tomita@cinet.co.jp)
Wed, 12 Feb 2003 23:10:19 +0900


This is patchset to support NEC PC-9800 subarchitecture
against 2.5.60 (25/34).

Parallel port support.

- Osamu Tomita

diff -Nru linux/drivers/parport/parport_pc.c linux98/drivers/parport/parport_pc.c
--- linux/drivers/parport/parport_pc.c 2002-12-16 11:08:22.000000000 +0900
+++ linux98/drivers/parport/parport_pc.c 2002-12-22 20:51:23.000000000 +0900
@@ -332,7 +332,10 @@

unsigned char parport_pc_read_status(struct parport *p)
{
- return inb (STATUS (p));
+ if (pc98 && p->base == 0x40)
+ return ((inb(0x42) & 0x04) << 5) | PARPORT_STATUS_ERROR;
+ else
+ return inb (STATUS (p));
}

void parport_pc_disable_irq(struct parport *p)
@@ -1644,6 +1647,8 @@
{
unsigned char r, w;

+ if (pc98 && pb->base == 0x40)
+ return PARPORT_MODE_PCSPP;
/*
* first clear an eventually pending EPP timeout
* I (sailer@ife.ee.ethz.ch) have an SMSC chipset
@@ -1777,6 +1782,9 @@
{
int ok = 0;

+ if (pc98 && pb->base == 0x40)
+ return 0; /* never support */
+
clear_epp_timeout(pb);

/* try to tri-state the buffer */
@@ -1908,6 +1916,9 @@
config & 0x80 ? "Level" : "Pulses");

configb = inb (CONFIGB (pb));
+ if (pc98 && (CONFIGB(pb) == 0x14d) && ((configb & 0x38) == 0x30))
+ configb = (configb & ~0x38) | 0x28; /* IRQ 14 */
+
printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
pb->base, config, configb);
printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
@@ -2048,6 +2059,9 @@
ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */

intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07;
+ if (pc98 && (CONFIGB(pb) == 0x14d) && (intrLine == 6))
+ intrLine = 5; /* IRQ 14 */
+
irq = lookup[intrLine];

ECR_WRITE (pb, oecr);
@@ -2212,7 +2226,14 @@
struct parport tmp;
struct parport *p = &tmp;
int probedirq = PARPORT_IRQ_NONE;
- if (check_region(base, 3)) return NULL;
+ if (pc98 && base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ if (check_region(base + i, 1)) return NULL;
+ } else {
+ if (check_region(base, 3)) return NULL;
+ }
+
priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
if (!priv) {
printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
@@ -2245,7 +2266,7 @@
if (base_hi && !check_region(base_hi,3))
parport_ECR_present(p);

- if (base != 0x3bc) {
+ if (!pc98 && base != 0x3bc) {
if (!check_region(base+0x3, 5)) {
if (!parport_EPP_supported(p))
parport_ECPEPP_supported(p);
@@ -2343,7 +2364,12 @@
printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
parport_proc_register(p);

- request_region (p->base, 3, p->name);
+ if (pc98 && p->base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ request_region(p->base + i, 1, p->name);
+ } else
+ request_region (p->base, 3, p->name);
if (p->size > 3)
request_region (p->base + 3, p->size - 3, p->name);
if (p->modes & PARPORT_MODE_ECP)
@@ -2413,7 +2439,13 @@
free_dma(p->dma);
if (p->irq != PARPORT_IRQ_NONE)
free_irq(p->irq, p);
- release_region(p->base, 3);
+ if (pc98 && p->base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ release_region(p->base + i, 1);
+ } else
+ release_region(p->base, 3);
+
if (p->size > 3)
release_region(p->base + 3, p->size - 3);
if (p->modes & PARPORT_MODE_ECP)
@@ -2996,6 +3028,30 @@
{
int count = 0;

+ if (pc98) {
+ /* Set default resource settings for old style parport */
+ int base = 0x40;
+ int base_hi = 0;
+ int irq = PARPORT_IRQ_NONE;
+ int dma = PARPORT_DMA_NONE;
+
+ /* Check PC9800 old style parport */
+ outb(inb(0x149) & ~0x10, 0x149); /* disable IEEE1284 */
+ if (!(inb(0x149) & 0x10)) { /* IEEE1284 disabled ? */
+ outb(inb(0x149) | 0x10, 0x149); /* enable IEEE1284 */
+ if (inb(0x149) & 0x10) { /* IEEE1284 enabled ? */
+ /* Set default settings for IEEE1284 parport */
+ base = 0x140;
+ base_hi = 0x14c;
+ irq = 14;
+ /* dma = PARPORT_DMA_NONE; */
+ }
+ }
+
+ if (parport_pc_probe_port(base, base_hi, irq, dma, NULL))
+ count++;
+ }
+
if (parport_pc_probe_port(0x3bc, 0x7bc, autoirq, autodma, NULL))
count++;
if (parport_pc_probe_port(0x378, 0x778, autoirq, autodma, NULL))
diff -Nru linux/include/linux/parport_pc.h linux98/include/linux/parport_pc.h
--- linux/include/linux/parport_pc.h 2002-06-12 11:15:27.000000000 +0900
+++ linux98/include/linux/parport_pc.h 2002-08-19 14:13:09.000000000 +0900
@@ -119,6 +119,11 @@
#endif
ctr = (ctr & ~mask) ^ val;
ctr &= priv->ctr_writable; /* only write writable bits. */
+#ifdef CONFIG_X86_PC9800
+ if (p->base == 0x40 && ((priv->ctr) ^ ctr) & 0x01)
+ outb(0x0e | ((ctr & 0x01) ^ 0x01), 0x46);
+ else
+#endif /* CONFIG_X86_PC9800 */
outb (ctr, CONTROL (p));
priv->ctr = ctr; /* Update soft copy */
return ctr;
@@ -191,6 +196,11 @@

extern __inline__ unsigned char parport_pc_read_status(struct parport *p)
{
+#ifdef CONFIG_X86_PC9800
+ if (p->base == 0x40)
+ return ((inb(0x42) & 0x04) << 5) | PARPORT_STATUS_ERROR;
+ else
+#endif /* CONFIG_X86_PC9800 */
return inb(STATUS(p));
}

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/