Core patches for PC98 under arch/i386 and include/asm-i386/mach-* directory.
- Osamu Tomita
diff -Nru linux-2.5.50-ac1/arch/i386/Kconfig linux98-2.5.60/arch/i386/Kconfig
--- linux-2.5.50-ac1/arch/i386/Kconfig 2003-02-11 03:38:00.000000000 +0900
+++ linux98-2.5.60/arch/i386/Kconfig 2003-02-11 10:52:52.000000000 +0900
@@ -75,6 +75,12 @@
If you don't have one of these computers, you should say N here.
+config X86_PC9800
+ bool "PC-9800 (NEC)"
+ help
+ To make kernel for NEC PC-9801/PC-9821 sub-architecture, say Y.
+ If say Y, kernel works -ONLY- on PC-9800 architecture.
+
config X86_BIGSMP
bool "Support for other sub-arch SMP systems with more than 8 CPUs"
help
@@ -1178,7 +1184,7 @@
config EISA
bool "EISA support"
- depends on ISA
+ depends on ISA && !X86_PC9800
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
@@ -1196,7 +1202,7 @@
config MCA
bool "MCA support"
- depends on !(X86_VISWS || X86_VOYAGER)
+ depends on !(X86_VISWS || X86_VOYAGER || X86_PC9800)
help
MicroChannel Architecture is found in some IBM PS/2 machines and
laptops. It is a bus system similar to PCI or ISA. See
diff -Nru linux-2.5.50-ac1/arch/i386/Makefile linux98-2.5.60/arch/i386/Makefile
--- linux-2.5.50-ac1/arch/i386/Makefile 2003-02-11 09:47:18.000000000 +0900
+++ linux98-2.5.60/arch/i386/Makefile 2003-02-11 11:05:20.000000000 +0900
@@ -64,6 +64,10 @@
mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-i386/mach-numaq
mcore-$(CONFIG_X86_NUMAQ) := mach-default
+# PC-9800 subarch support
+mflags-$(CONFIG_X86_PC9800) := -Iinclude/asm-i386/mach-pc9800
+mcore-$(CONFIG_X86_PC9800) := mach-pc9800
+
# BIGSMP subarch support
mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-i386/mach-bigsmp
mcore-$(CONFIG_X86_BIGSMP) := mach-default
@@ -89,14 +93,18 @@
CFLAGS += $(mflags-y)
AFLAGS += $(mflags-y)
+ifeq ($(CONFIG_X86_PC9800),y)
+boot := arch/i386/boot98
+else
boot := arch/i386/boot
+endif
.PHONY: zImage bzImage compressed zlilo bzlilo zdisk bzdisk install
all: bzImage
-BOOTIMAGE=arch/i386/boot/bzImage
-zImage zlilo zdisk: BOOTIMAGE=arch/i386/boot/zImage
+BOOTIMAGE=$(boot)/bzImage
+zImage zlilo zdisk: BOOTIMAGE=$(boot)/zImage
zImage bzImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(BOOTIMAGE)
@@ -117,7 +125,7 @@
$(Q)$(MAKE) $(clean)=arch/i386/boot98
define archhelp
- echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
+ echo '* bzImage - Compressed kernel image ($(boot)/bzImage)'
echo ' install - Install kernel using'
echo ' (your) ~/bin/installkernel or'
echo ' (distribution) /sbin/installkernel or'
diff -Nru linux/arch/i386/kernel/setup.c linux98/arch/i386/kernel/setup.c
--- linux/arch/i386/kernel/setup.c 2002-12-26 13:40:40.000000000 +0900
+++ linux98/arch/i386/kernel/setup.c 2002-12-26 14:01:32.000000000 +0900
@@ -20,6 +20,7 @@
* This file handles the architecture-dependent parts of initialization
*/
+#include <linux/config.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/tty.h>
@@ -40,6 +41,7 @@
#include <asm/setup.h>
#include <asm/arch_hooks.h>
#include "setup_arch_pre.h"
+#include "mach_resources.h"
int disable_pse __initdata = 0;
@@ -102,98 +104,8 @@
static char command_line[COMMAND_LINE_SIZE];
char saved_command_line[COMMAND_LINE_SIZE];
-struct resource standard_io_resources[] = {
- { "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
- { "pic1", 0x20, 0x3f, IORESOURCE_BUSY },
- { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
- { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
- { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
- { "pic2", 0xa0, 0xbf, IORESOURCE_BUSY },
- { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
- { "fpu", 0xf0, 0xff, IORESOURCE_BUSY }
-};
-#ifdef CONFIG_MELAN
-standard_io_resources[1] = { "pic1", 0x20, 0x21, IORESOURCE_BUSY };
-standard_io_resources[5] = { "pic2", 0xa0, 0xa1, IORESOURCE_BUSY };
-#endif
-
-#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
-
static struct resource code_resource = { "Kernel code", 0x100000, 0 };
static struct resource data_resource = { "Kernel data", 0, 0 };
-static struct resource vram_resource = { "Video RAM area", 0xa0000, 0xbffff, IORESOURCE_BUSY };
-
-/* System ROM resources */
-#define MAXROMS 6
-static struct resource rom_resources[MAXROMS] = {
- { "System ROM", 0xF0000, 0xFFFFF, IORESOURCE_BUSY },
- { "Video ROM", 0xc0000, 0xc7fff, IORESOURCE_BUSY }
-};
-
-#define romsignature(x) (*(unsigned short *)(x) == 0xaa55)
-
-static void __init probe_roms(void)
-{
- int roms = 1;
- unsigned long base;
- unsigned char *romstart;
-
- request_resource(&iomem_resource, rom_resources+0);
-
- /* Video ROM is standard at C000:0000 - C7FF:0000, check signature */
- for (base = 0xC0000; base < 0xE0000; base += 2048) {
- romstart = isa_bus_to_virt(base);
- if (!romsignature(romstart))
- continue;
- request_resource(&iomem_resource, rom_resources + roms);
- roms++;
- break;
- }
-
- /* Extension roms at C800:0000 - DFFF:0000 */
- for (base = 0xC8000; base < 0xE0000; base += 2048) {
- unsigned long length;
-
- romstart = isa_bus_to_virt(base);
- if (!romsignature(romstart))
- continue;
- length = romstart[2] * 512;
- if (length) {
- unsigned int i;
- unsigned char chksum;
-
- chksum = 0;
- for (i = 0; i < length; i++)
- chksum += romstart[i];
-
- /* Good checksum? */
- if (!chksum) {
- rom_resources[roms].start = base;
- rom_resources[roms].end = base + length - 1;
- rom_resources[roms].name = "Extension ROM";
- rom_resources[roms].flags = IORESOURCE_BUSY;
-
- request_resource(&iomem_resource, rom_resources + roms);
- roms++;
- if (roms >= MAXROMS)
- return;
- }
- }
- }
-
- /* Final check for motherboard extension rom at E000:0000 */
- base = 0xE0000;
- romstart = isa_bus_to_virt(base);
-
- if (romsignature(romstart)) {
- rom_resources[roms].start = base;
- rom_resources[roms].end = base + 65535;
- rom_resources[roms].name = "Extension ROM";
- rom_resources[roms].flags = IORESOURCE_BUSY;
-
- request_resource(&iomem_resource, rom_resources + roms);
- }
-}
static void __init limit_regions (unsigned long long size)
{
@@ -826,11 +738,8 @@
request_resource(res, &data_resource);
}
}
- request_resource(&iomem_resource, &vram_resource);
- /* request I/O space for devices used on all i[345]86 PCs */
- for (i = 0; i < STANDARD_IO_RESOURCES; i++)
- request_resource(&ioport_resource, standard_io_resources+i);
+ mach_request_resource( );
/* Tell the PCI layer not to allocate too close to the RAM area.. */
low_mem_size = ((max_low_pfn << PAGE_SHIFT) + 0xfffff) & ~0xfffff;
@@ -911,6 +820,8 @@
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
conswitchp = &vga_con;
+#elif defined(CONFIG_GDC_CONSOLE)
+ conswitchp = &gdc_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
diff -Nru linux-2.5.60/arch/i386/kernel/time.c linux98-2.5.60/arch/i386/kernel/time.c
--- linux-2.5.60/arch/i386/kernel/time.c 2003-02-11 03:38:37.000000000 +0900
+++ linux98-2.5.60/arch/i386/kernel/time.c 2003-02-11 10:52:52.000000000 +0900
@@ -55,12 +55,15 @@
#include <asm/processor.h>
#include <asm/timer.h>
-#include <linux/mc146818rtc.h>
+#include "mach_time.h"
+
#include <linux/timex.h>
#include <linux/config.h>
#include <asm/arch_hooks.h>
+#include "io_ports.h"
+
extern spinlock_t i8259A_lock;
int pit_latch_buggy; /* extern */
@@ -137,69 +140,13 @@
write_sequnlock_irq(&xtime_lock);
}
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- * sets the minutes. Usually you'll only notice that after reboot!
- */
static int set_rtc_mmss(unsigned long nowtime)
{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned char save_control, save_freq_select;
+ int retval;
/* gets recalled with irq locally disabled */
spin_lock(&rtc_lock);
- save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
- CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
- save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
- CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
- cmos_minutes = CMOS_READ(RTC_MINUTES);
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- BCD_TO_BIN(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
- }
- CMOS_WRITE(real_seconds,RTC_SECONDS);
- CMOS_WRITE(real_minutes,RTC_MINUTES);
- } else {
- printk(KERN_WARNING
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- /* The following flags have to be released exactly in this order,
- * otherwise the DS12887 (popular MC146818A clone with integrated
- * battery and quartz) will not reset the oscillator and will not
- * update precisely 500 ms later. You won't find this mentioned in
- * the Dallas Semiconductor data sheets, but who believes data
- * sheets anyway ... -- Markus Kuhn
- */
- CMOS_WRITE(save_control, RTC_CONTROL);
- CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+ retval = mach_set_rtc_mmss(nowtime);
spin_unlock(&rtc_lock);
return retval;
@@ -225,9 +172,9 @@
* on an 82489DX-based system.
*/
spin_lock(&i8259A_lock);
- outb(0x0c, 0x20);
+ outb(0x0c, PIC_MASTER_OCW3);
/* Ack the IRQ; AEOI will end it automatically. */
- inb(0x20);
+ inb(PIC_MASTER_POLL);
spin_unlock(&i8259A_lock);
}
#endif
@@ -241,14 +188,14 @@
*/
if ((time_status & STA_UNSYNC) == 0 &&
xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
- (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
+ (xtime.tv_nsec / 1000) >= TIME1 - ((unsigned) TICK_SIZE) / 2 &&
+ (xtime.tv_nsec / 1000) <= TIME2 + ((unsigned) TICK_SIZE) / 2) {
if (set_rtc_mmss(xtime.tv_sec) == 0)
last_rtc_update = xtime.tv_sec;
else
last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
}
-
+
#ifdef CONFIG_MCA
if( MCA_bus ) {
/* The PS/2 uses level-triggered interrupts. You can't
@@ -329,43 +276,15 @@
/* not static: needed by APM */
unsigned long get_cmos_time(void)
{
- unsigned int year, mon, day, hour, min, sec;
- int i;
+ unsigned long retval;
spin_lock(&rtc_lock);
- /* The Linux interpretation of the CMOS clock register contents:
- * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
- * RTC registers show the second which has precisely just started.
- * Let's hope other operating systems interpret the RTC the same way.
- */
- /* read RTC exactly on falling edge of update flag */
- for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
- if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
- break;
- for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
- if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
- break;
- do { /* Isn't this overkill ? UIP above should guarantee consistency */
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
- } while (sec != CMOS_READ(RTC_SECONDS));
- if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- {
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
- }
+
+ retval = mach_get_cmos_time();
+
spin_unlock(&rtc_lock);
- if ((year += 1900) < 1970)
- year += 100;
- return mktime(year, mon, day, hour, min, sec);
+
+ return retval;
}
/* XXX this driverfs stuff should probably go elsewhere later -john */
diff -Nru linux-2.5.60/arch/i386/kernel/timers/timer_pit.c linux98-2.5.60/arch/i386/kernel/timers/timer_pit.c
--- linux-2.5.60/arch/i386/kernel/timers/timer_pit.c 2003-02-11 03:38:51.000000000 +0900
+++ linux98-2.5.60/arch/i386/kernel/timers/timer_pit.c 2003-02-11 11:15:22.000000000 +0900
@@ -16,6 +16,7 @@
extern spinlock_t i8259A_lock;
extern spinlock_t i8253_lock;
#include "do_timer.h"
+#include "io_ports.h"
static int init_pit(void)
{
@@ -77,7 +78,8 @@
{
int count;
unsigned long flags;
- static int count_p = LATCH; /* for the first call after boot */
+ static int count_p;
+ static int is_1st_boot = 1; /* for the first call after boot */
static unsigned long jiffies_p = 0;
/*
@@ -85,11 +87,17 @@
*/
unsigned long jiffies_t;
+ /* for support LATCH is not constant */
+ if (is_1st_boot) {
+ is_1st_boot = 0;
+ count_p = LATCH;
+ }
+
spin_lock_irqsave(&i8253_lock, flags);
/* timer count may underflow right here */
- outb_p(0x00, 0x43); /* latch the count ASAP */
+ outb_p(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_p(0x40); /* read the latched count */
+ count = inb_p(PIT_CH0); /* read the latched count */
/*
* We do this guaranteed double memory access instead of a _p
@@ -97,13 +105,13 @@
*/
jiffies_t = jiffies;
- count |= inb_p(0x40) << 8;
+ count |= inb_p(PIT_CH0) << 8;
/* VIA686a test code... reset the latch if count > max + 1 */
if (count > LATCH) {
- outb_p(0x34, 0x43);
- outb_p(LATCH & 0xff, 0x40);
- outb(LATCH >> 8, 0x40);
+ outb_p(0x34, PIT_MODE);
+ outb_p(LATCH & 0xff, PIT_CH0);
+ outb(LATCH >> 8, PIT_CH0);
count = LATCH - 1;
}
diff -Nru linux/arch/i386/kernel/timers/timer_tsc.c linux98/arch/i386/kernel/timers/timer_tsc.c
--- linux/arch/i386/kernel/timers/timer_tsc.c 2003-01-14 14:59:01.000000000 +0900
+++ linux98/arch/i386/kernel/timers/timer_tsc.c 2003-01-14 22:42:14.000000000 +0900
@@ -14,6 +14,9 @@
/* processor.h for distable_tsc flag */
#include <asm/processor.h>
+#include "io_ports.h"
+#include "calibrate_tsc.h"
+
int tsc_disable __initdata = 0;
extern spinlock_t i8253_lock;
@@ -22,8 +25,6 @@
/* Number of usecs that the last interrupt was delayed */
static int delay_at_last_interrupt;
-static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
-
/* Cached *multiplier* to convert TSC counts to microseconds.
* (see the equation below).
* Equal to 2^32 * (1 / (clocks per usec) ).
@@ -64,7 +65,12 @@
{
int count;
int countmp;
- static int count1=0, count2=LATCH;
+ static int count1=0, count2, initialize = 1;
+
+ if (initialize) {
+ count2 = LATCH;
+ initialize = 0;
+ }
/*
* It is important that these two operations happen almost at
* the same time. We do the RDTSC stuff first, since it's
@@ -82,10 +88,10 @@
rdtscl(last_tsc_low);
spin_lock(&i8253_lock);
- outb_p(0x00, 0x43); /* latch the count ASAP */
+ outb_p(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_p(0x40); /* read the latched count */
- count |= inb(0x40) << 8;
+ count = inb_p(PIT_CH0); /* read the latched count */
+ count |= inb(PIT_CH0) << 8;
spin_unlock(&i8253_lock);
if (pit_latch_buggy) {
@@ -118,83 +124,9 @@
} while ((now-bclock) < loops);
}
-/* ------ Calibrate the TSC -------
- * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
- * Too much 64-bit arithmetic here to do this cleanly in C, and for
- * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
- * output busy loop as low as possible. We avoid reading the CTC registers
- * directly because of the awkward 8-bit access mechanism of the 82C54
- * device.
- */
-
-#define CALIBRATE_LATCH (5 * LATCH)
-#define CALIBRATE_TIME (5 * 1000020/HZ)
-
static unsigned long __init calibrate_tsc(void)
{
- /* Set the Gate high, disable speaker */
- outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
- /*
- * Now let's take care of CTC channel 2
- *
- * Set the Gate high, program CTC channel 2 for mode 0,
- * (interrupt on terminal count mode), binary count,
- * load 5 * LATCH count, (LSB and MSB) to begin countdown.
- *
- * Some devices need a delay here.
- */
- outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */
- outb_p(CALIBRATE_LATCH & 0xff, 0x42); /* LSB of count */
- outb_p(CALIBRATE_LATCH >> 8, 0x42); /* MSB of count */
-
- {
- unsigned long startlow, starthigh;
- unsigned long endlow, endhigh;
- unsigned long count;
-
- rdtsc(startlow,starthigh);
- count = 0;
- do {
- count++;
- } while ((inb(0x61) & 0x20) == 0);
- rdtsc(endlow,endhigh);
-
- last_tsc_low = endlow;
-
- /* Error: ECTCNEVERSET */
- if (count <= 1)
- goto bad_ctc;
-
- /* 64-bit subtract - gcc just messes up with long longs */
- __asm__("subl %2,%0\n\t"
- "sbbl %3,%1"
- :"=a" (endlow), "=d" (endhigh)
- :"g" (startlow), "g" (starthigh),
- "0" (endlow), "1" (endhigh));
-
- /* Error: ECPUTOOFAST */
- if (endhigh)
- goto bad_ctc;
-
- /* Error: ECPUTOOSLOW */
- if (endlow <= CALIBRATE_TIME)
- goto bad_ctc;
-
- __asm__("divl %2"
- :"=a" (endlow), "=d" (endhigh)
- :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
-
- return endlow;
- }
-
- /*
- * The CTC wasn't reliable: we got a hit on the very first read,
- * or the CPU was so fast/slow that the quotient wouldn't fit in
- * 32 bits..
- */
-bad_ctc:
- return 0;
+ return mach_calibrate_tsc();
}
diff -Nru linux/arch/i386/kernel/traps.c linux98/arch/i386/kernel/traps.c
--- linux/arch/i386/kernel/traps.c 2003-01-14 09:33:33.000000000 +0900
+++ linux98/arch/i386/kernel/traps.c 2003-01-14 09:52:36.000000000 +0900
@@ -50,6 +50,8 @@
#include <linux/irq.h>
#include <linux/module.h>
+#include "mach_traps.h"
+
asmlinkage int system_call(void);
asmlinkage void lcall7(void);
asmlinkage void lcall27(void);
@@ -387,8 +389,7 @@
printk("You probably have a hardware problem with your RAM chips\n");
/* Clear and disable the memory parity error line. */
- reason = (reason & 0xf) | 4;
- outb(reason, 0x61);
+ clear_mem_error(reason);
}
static void io_check_error(unsigned char reason, struct pt_regs * regs)
@@ -425,7 +426,7 @@
static void default_do_nmi(struct pt_regs * regs)
{
- unsigned char reason = inb(0x61);
+ unsigned char reason = get_nmi_reason();
if (!(reason & 0xc0)) {
#if CONFIG_X86_LOCAL_APIC
@@ -449,10 +450,7 @@
* Reassert NMI in case it became active meanwhile
* as it's edge-triggered.
*/
- outb(0x8f, 0x70);
- inb(0x71); /* dummy */
- outb(0x0f, 0x70);
- inb(0x71); /* dummy */
+ reassert_nmi();
}
static int dummy_nmi_callback(struct pt_regs * regs, int cpu)
diff -Nru linux/include/asm-i386/mach-default/calibrate_tsc.h linux98/include/asm-i386/mach-default/calibrate_tsc.h
--- linux/include/asm-i386/mach-default/calibrate_tsc.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-default/calibrate_tsc.h 2002-11-05 22:15:11.000000000 +0900
@@ -0,0 +1,90 @@
+/*
+ * include/asm-i386/mach-default/calibrate_tsc.h
+ *
+ * Machine specific calibrate_tsc() for generic.
+ * Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+/* ------ Calibrate the TSC -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+#ifndef _MACH_CALIBRATE_TSC_H
+#define _MACH_CALIBRATE_TSC_H
+
+#define CALIBRATE_LATCH (5 * LATCH)
+#define CALIBRATE_TIME (5 * 1000020/HZ)
+
+static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
+
+static inline unsigned long mach_calibrate_tsc(void)
+{
+ /* Set the Gate high, disable speaker */
+ outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+ /*
+ * Now let's take care of CTC channel 2
+ *
+ * Set the Gate high, program CTC channel 2 for mode 0,
+ * (interrupt on terminal count mode), binary count,
+ * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+ *
+ * Some devices need a delay here.
+ */
+ outb(0xb0, PIT_MODE); /* binary, mode 0, LSB/MSB, Ch 2 */
+ outb(CALIBRATE_LATCH & 0xff, PIT_CH2); /* LSB of count */
+ outb(CALIBRATE_LATCH >> 8, PIT_CH2); /* MSB of count */
+
+ {
+ unsigned long startlow, starthigh;
+ unsigned long endlow, endhigh;
+ unsigned long count;
+
+ rdtsc(startlow,starthigh);
+ count = 0;
+ do {
+ count++;
+ } while ((inb(0x61) & 0x20) == 0);
+ rdtsc(endlow,endhigh);
+
+ last_tsc_low = endlow;
+
+ /* Error: ECTCNEVERSET */
+ if (count <= 1)
+ goto bad_ctc;
+
+ /* 64-bit subtract - gcc just messes up with long longs */
+ __asm__("subl %2,%0\n\t"
+ "sbbl %3,%1"
+ :"=a" (endlow), "=d" (endhigh)
+ :"g" (startlow), "g" (starthigh),
+ "0" (endlow), "1" (endhigh));
+
+ /* Error: ECPUTOOFAST */
+ if (endhigh)
+ goto bad_ctc;
+
+ /* Error: ECPUTOOSLOW */
+ if (endlow <= CALIBRATE_TIME)
+ goto bad_ctc;
+
+ __asm__("divl %2"
+ :"=a" (endlow), "=d" (endhigh)
+ :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
+
+ return endlow;
+ }
+
+ /*
+ * The CTC wasn't reliable: we got a hit on the very first read,
+ * or the CPU was so fast/slow that the quotient wouldn't fit in
+ * 32 bits..
+ */
+bad_ctc:
+ return 0;
+}
+
+#endif /* !_MACH_CALIBRATE_TSC_H */
diff -Nru linux/include/asm-i386/mach-default/mach_resources.h linux98/include/asm-i386/mach-default/mach_resources.h
--- linux/include/asm-i386/mach-default/mach_resources.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-default/mach_resources.h 2002-10-21 09:59:22.000000000 +0900
@@ -0,0 +1,113 @@
+/*
+ * include/asm-i386/mach-default/mach_resources.h
+ *
+ * Machine specific resource allocation for generic.
+ * Split out from setup.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_RESOURCES_H
+#define _MACH_RESOURCES_H
+
+struct resource standard_io_resources[] = {
+ { "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
+ { "pic1", 0x20, 0x3f, IORESOURCE_BUSY },
+ { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
+ { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
+ { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
+ { "pic2", 0xa0, 0xbf, IORESOURCE_BUSY },
+ { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
+ { "fpu", 0xf0, 0xff, IORESOURCE_BUSY }
+};
+#ifdef CONFIG_MELAN
+standard_io_resources[1] = { "pic1", 0x20, 0x21, IORESOURCE_BUSY };
+standard_io_resources[5] = { "pic2", 0xa0, 0xa1, IORESOURCE_BUSY };
+#endif
+
+#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
+
+static struct resource vram_resource = { "Video RAM area", 0xa0000, 0xbffff, IORESOURCE_BUSY };
+
+/* System ROM resources */
+#define MAXROMS 6
+static struct resource rom_resources[MAXROMS] = {
+ { "System ROM", 0xF0000, 0xFFFFF, IORESOURCE_BUSY },
+ { "Video ROM", 0xc0000, 0xc7fff, IORESOURCE_BUSY }
+};
+
+#define romsignature(x) (*(unsigned short *)(x) == 0xaa55)
+
+static inline void probe_roms(void)
+{
+ int roms = 1;
+ unsigned long base;
+ unsigned char *romstart;
+
+ request_resource(&iomem_resource, rom_resources+0);
+
+ /* Video ROM is standard at C000:0000 - C7FF:0000, check signature */
+ for (base = 0xC0000; base < 0xE0000; base += 2048) {
+ romstart = isa_bus_to_virt(base);
+ if (!romsignature(romstart))
+ continue;
+ request_resource(&iomem_resource, rom_resources + roms);
+ roms++;
+ break;
+ }
+
+ /* Extension roms at C800:0000 - DFFF:0000 */
+ for (base = 0xC8000; base < 0xE0000; base += 2048) {
+ unsigned long length;
+
+ romstart = isa_bus_to_virt(base);
+ if (!romsignature(romstart))
+ continue;
+ length = romstart[2] * 512;
+ if (length) {
+ unsigned int i;
+ unsigned char chksum;
+
+ chksum = 0;
+ for (i = 0; i < length; i++)
+ chksum += romstart[i];
+
+ /* Good checksum? */
+ if (!chksum) {
+ rom_resources[roms].start = base;
+ rom_resources[roms].end = base + length - 1;
+ rom_resources[roms].name = "Extension ROM";
+ rom_resources[roms].flags = IORESOURCE_BUSY;
+
+ request_resource(&iomem_resource, rom_resources + roms);
+ roms++;
+ if (roms >= MAXROMS)
+ return;
+ }
+ }
+ }
+
+ /* Final check for motherboard extension rom at E000:0000 */
+ base = 0xE0000;
+ romstart = isa_bus_to_virt(base);
+
+ if (romsignature(romstart)) {
+ rom_resources[roms].start = base;
+ rom_resources[roms].end = base + 65535;
+ rom_resources[roms].name = "Extension ROM";
+ rom_resources[roms].flags = IORESOURCE_BUSY;
+
+ request_resource(&iomem_resource, rom_resources + roms);
+ }
+}
+
+static inline void mach_request_resource(void)
+{
+ int i;
+
+ request_resource(&iomem_resource, &vram_resource);
+
+ /* request I/O space for devices used on all i[345]86 PCs */
+ for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+ request_resource(&ioport_resource, standard_io_resources+i);
+
+}
+
+#endif /* !_MACH_RESOURCES_H */
diff -Nru linux/include/asm-i386/mach-default/mach_time.h linux98/include/asm-i386/mach-default/mach_time.h
--- linux/include/asm-i386/mach-default/mach_time.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-default/mach_time.h 2002-10-21 10:07:35.000000000 +0900
@@ -0,0 +1,122 @@
+/*
+ * include/asm-i386/mach-default/mach_time.h
+ *
+ * Machine specific set RTC function for generic.
+ * Split out from time.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TIME_H
+#define _MACH_TIME_H
+
+#include <linux/mc146818rtc.h>
+
+/* for check timing call set_rtc_mmss() 500ms */
+/* used in arch/i386/time.c::do_timer_interrupt() */
+#define TIME1 500000
+#define TIME2 500000
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ * sets the minutes. Usually you'll only notice that after reboot!
+ */
+static inline int mach_set_rtc_mmss(unsigned long nowtime)
+{
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+ unsigned char save_control, save_freq_select;
+
+ save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+ CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+ CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+ cmos_minutes = CMOS_READ(RTC_MINUTES);
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ BCD_TO_BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
+ }
+ CMOS_WRITE(real_seconds,RTC_SECONDS);
+ CMOS_WRITE(real_minutes,RTC_MINUTES);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ /* The following flags have to be released exactly in this order,
+ * otherwise the DS12887 (popular MC146818A clone with integrated
+ * battery and quartz) will not reset the oscillator and will not
+ * update precisely 500 ms later. You won't find this mentioned in
+ * the Dallas Semiconductor data sheets, but who believes data
+ * sheets anyway ... -- Markus Kuhn
+ */
+ CMOS_WRITE(save_control, RTC_CONTROL);
+ CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+ return retval;
+}
+
+static inline unsigned long mach_get_cmos_time(void)
+{
+ unsigned int year, mon, day, hour, min, sec;
+ int i;
+
+ /* The Linux interpretation of the CMOS clock register contents:
+ * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+ * RTC registers show the second which has precisely just started.
+ * Let's hope other operating systems interpret the RTC the same way.
+ */
+ /* read RTC exactly on falling edge of update flag */
+ for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
+ if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
+ break;
+ for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
+ if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+ break;
+ do { /* Isn't this overkill ? UIP above should guarantee consistency */
+ sec = CMOS_READ(RTC_SECONDS);
+ min = CMOS_READ(RTC_MINUTES);
+ hour = CMOS_READ(RTC_HOURS);
+ day = CMOS_READ(RTC_DAY_OF_MONTH);
+ mon = CMOS_READ(RTC_MONTH);
+ year = CMOS_READ(RTC_YEAR);
+ } while (sec != CMOS_READ(RTC_SECONDS));
+ if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ {
+ BCD_TO_BIN(sec);
+ BCD_TO_BIN(min);
+ BCD_TO_BIN(hour);
+ BCD_TO_BIN(day);
+ BCD_TO_BIN(mon);
+ BCD_TO_BIN(year);
+ }
+ if ((year += 1900) < 1970)
+ year += 100;
+
+ return mktime(year, mon, day, hour, min, sec);
+}
+
+#endif /* !_MACH_TIME_H */
diff -Nru linux/include/asm-i386/mach-default/mach_traps.h linux98/include/asm-i386/mach-default/mach_traps.h
--- linux/include/asm-i386/mach-default/mach_traps.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-default/mach_traps.h 2002-11-05 22:42:05.000000000 +0900
@@ -0,0 +1,29 @@
+/*
+ * include/asm-i386/mach-default/mach_traps.h
+ *
+ * Machine specific NMI handling for generic.
+ * Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TRAPS_H
+#define _MACH_TRAPS_H
+
+static inline void clear_mem_error(unsigned char reason)
+{
+ reason = (reason & 0xf) | 4;
+ outb(reason, 0x61);
+}
+
+static inline unsigned char get_nmi_reason(void)
+{
+ return inb(0x61);
+}
+
+static inline void reassert_nmi(void)
+{
+ outb(0x8f, 0x70);
+ inb(0x71); /* dummy */
+ outb(0x0f, 0x70);
+ inb(0x71); /* dummy */
+}
+
+#endif /* !_MACH_TRAPS_H */
diff -Nru linux/include/asm-i386/mach-pc9800/calibrate_tsc.h linux98/include/asm-i386/mach-pc9800/calibrate_tsc.h
--- linux/include/asm-i386/mach-pc9800/calibrate_tsc.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-pc9800/calibrate_tsc.h 2002-11-05 22:19:50.000000000 +0900
@@ -0,0 +1,71 @@
+/*
+ * include/asm-i386/mach-pc9800/calibrate_tsc.h
+ *
+ * Machine specific calibrate_tsc() for PC-9800.
+ * Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+/* ------ Calibrate the TSC -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C.
+ * PC-9800:
+ * CTC cannot be used because some models (especially
+ * note-machines) may disable clock to speaker channel (#1)
+ * unless speaker is enabled. We use ARTIC instead.
+ */
+#ifndef _MACH_CALIBRATE_TSC_H
+#define _MACH_CALIBRATE_TSC_H
+
+#define CALIBRATE_LATCH (5 * 307200/HZ) /* 0.050sec * 307200Hz = 15360 */
+#define CALIBRATE_TIME (5 * 1000020/HZ)
+
+static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
+
+static inline unsigned long mach_calibrate_tsc(void)
+{
+
+ unsigned long startlow, starthigh;
+ unsigned long endlow, endhigh;
+ unsigned short count;
+
+ for (count = inw(0x5c); inw(0x5c) == count; )
+ ;
+ rdtsc(startlow,starthigh);
+ count = inw(0x5c);
+ while ((unsigned short)(inw(0x5c) - count) < CALIBRATE_LATCH)
+ ;
+ rdtsc(endlow,endhigh);
+
+ last_tsc_low = endlow;
+
+ /* 64-bit subtract - gcc just messes up with long longs */
+ __asm__("subl %2,%0\n\t"
+ "sbbl %3,%1"
+ :"=a" (endlow), "=d" (endhigh)
+ :"g" (startlow), "g" (starthigh),
+ "0" (endlow), "1" (endhigh));
+
+ /* Error: ECPUTOOFAST */
+ if (endhigh)
+ goto bad_ctc;
+
+ /* Error: ECPUTOOSLOW */
+ if (endlow <= CALIBRATE_TIME)
+ goto bad_ctc;
+
+ __asm__("divl %2"
+ :"=a" (endlow), "=d" (endhigh)
+ :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
+
+ return endlow;
+
+ /*
+ * The CTC wasn't reliable: we got a hit on the very first read,
+ * or the CPU was so fast/slow that the quotient wouldn't fit in
+ * 32 bits..
+ */
+bad_ctc:
+ return 0;
+}
+
+#endif /* !_MACH_CALIBRATE_TSC_H */
diff -Nru linux/include/asm-i386/mach-pc9800/do_timer.h linux98/include/asm-i386/mach-pc9800/do_timer.h
--- linux/include/asm-i386/mach-pc9800/do_timer.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-pc9800/do_timer.h 2002-10-16 13:20:29.000000000 +0900
@@ -0,0 +1,80 @@
+/* defines for inline arch setup functions */
+
+/**
+ * do_timer_interrupt_hook - hook into timer tick
+ * @regs: standard registers from interrupt
+ *
+ * Description:
+ * This hook is called immediately after the timer interrupt is ack'd.
+ * It's primary purpose is to allow architectures that don't possess
+ * individual per CPU clocks (like the CPU APICs supply) to broadcast the
+ * timer interrupt as a means of triggering reschedules etc.
+ **/
+
+static inline void do_timer_interrupt_hook(struct pt_regs *regs)
+{
+ do_timer(regs);
+/*
+ * In the SMP case we use the local APIC timer interrupt to do the
+ * profiling, except when we simulate SMP mode on a uniprocessor
+ * system, in that case we have to call the local interrupt handler.
+ */
+#ifndef CONFIG_X86_LOCAL_APIC
+ x86_do_profile(regs);
+#else
+ if (!using_apic_timer)
+ smp_local_timer_interrupt(regs);
+#endif
+}
+
+
+/* you can safely undefine this if you don't have the Neptune chipset */
+
+#define BUGGY_NEPTUN_TIMER
+
+/**
+ * do_timer_overflow - process a detected timer overflow condition
+ * @count: hardware timer interrupt count on overflow
+ *
+ * Description:
+ * This call is invoked when the jiffies count has not incremented but
+ * the hardware timer interrupt has. It means that a timer tick interrupt
+ * came along while the previous one was pending, thus a tick was missed
+ **/
+static inline int do_timer_overflow(int count)
+{
+ int i;
+
+ spin_lock(&i8259A_lock);
+ /*
+ * This is tricky when I/O APICs are used;
+ * see do_timer_interrupt().
+ */
+ i = inb(0x00);
+ spin_unlock(&i8259A_lock);
+
+ /* assumption about timer being IRQ0 */
+ if (i & 0x01) {
+ /*
+ * We cannot detect lost timer interrupts ...
+ * well, that's why we call them lost, don't we? :)
+ * [hmm, on the Pentium and Alpha we can ... sort of]
+ */
+ count -= LATCH;
+ } else {
+#ifdef BUGGY_NEPTUN_TIMER
+ /*
+ * for the Neptun bug we know that the 'latch'
+ * command doesnt latch the high and low value
+ * of the counter atomically. Thus we have to
+ * substract 256 from the counter
+ * ... funny, isnt it? :)
+ */
+
+ count -= 256;
+#else
+ printk("do_slow_gettimeoffset(): hardware timer problem?\n");
+#endif
+ }
+ return count;
+}
diff -Nru linux/include/asm-i386/mach-pc9800/mach_resources.h linux98/include/asm-i386/mach-pc9800/mach_resources.h
--- linux/include/asm-i386/mach-pc9800/mach_resources.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-pc9800/mach_resources.h 2002-10-26 17:35:19.000000000 +0900
@@ -0,0 +1,192 @@
+/*
+ * include/asm-i386/mach-pc9800/mach_resources.h
+ *
+ * Machine specific resource allocation for PC-9800.
+ * Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_RESOURCES_H
+#define _MACH_RESOURCES_H
+
+static char str_pic1[] = "pic1";
+static char str_dma[] = "dma";
+static char str_pic2[] = "pic2";
+static char str_calender_clock[] = "calender clock";
+static char str_system[] = "system";
+static char str_nmi_control[] = "nmi control";
+static char str_kanji_rom[] = "kanji rom";
+static char str_keyboard[] = "keyboard";
+static char str_text_gdc[] = "text gdc";
+static char str_crtc[] = "crtc";
+static char str_timer[] = "timer";
+static char str_graphic_gdc[] = "graphic gdc";
+static char str_dma_ex_bank[] = "dma ex. bank";
+static char str_beep_freq[] = "beep freq.";
+static char str_mouse_pio[] = "mouse pio";
+struct resource standard_io_resources[] = {
+ { str_pic1, 0x00, 0x00, IORESOURCE_BUSY },
+ { str_dma, 0x01, 0x01, IORESOURCE_BUSY },
+ { str_pic1, 0x02, 0x02, IORESOURCE_BUSY },
+ { str_dma, 0x03, 0x03, IORESOURCE_BUSY },
+ { str_dma, 0x05, 0x05, IORESOURCE_BUSY },
+ { str_dma, 0x07, 0x07, IORESOURCE_BUSY },
+ { str_pic2, 0x08, 0x08, IORESOURCE_BUSY },
+ { str_dma, 0x09, 0x09, IORESOURCE_BUSY },
+ { str_pic2, 0x0a, 0x0a, IORESOURCE_BUSY },
+ { str_dma, 0x0b, 0x0b, IORESOURCE_BUSY },
+ { str_dma, 0x0d, 0x0d, IORESOURCE_BUSY },
+ { str_dma, 0x0f, 0x0f, IORESOURCE_BUSY },
+ { str_dma, 0x11, 0x11, IORESOURCE_BUSY },
+ { str_dma, 0x13, 0x13, IORESOURCE_BUSY },
+ { str_dma, 0x15, 0x15, IORESOURCE_BUSY },
+ { str_dma, 0x17, 0x17, IORESOURCE_BUSY },
+ { str_dma, 0x19, 0x19, IORESOURCE_BUSY },
+ { str_dma, 0x1b, 0x1b, IORESOURCE_BUSY },
+ { str_dma, 0x1d, 0x1d, IORESOURCE_BUSY },
+ { str_dma, 0x1f, 0x1f, IORESOURCE_BUSY },
+ { str_calender_clock, 0x20, 0x20, 0 },
+ { str_dma, 0x21, 0x21, IORESOURCE_BUSY },
+ { str_calender_clock, 0x22, 0x22, 0 },
+ { str_dma, 0x23, 0x23, IORESOURCE_BUSY },
+ { str_dma, 0x25, 0x25, IORESOURCE_BUSY },
+ { str_dma, 0x27, 0x27, IORESOURCE_BUSY },
+ { str_dma, 0x29, 0x29, IORESOURCE_BUSY },
+ { str_dma, 0x2b, 0x2b, IORESOURCE_BUSY },
+ { str_dma, 0x2d, 0x2d, IORESOURCE_BUSY },
+ { str_system, 0x31, 0x31, IORESOURCE_BUSY },
+ { str_system, 0x33, 0x33, IORESOURCE_BUSY },
+ { str_system, 0x35, 0x35, IORESOURCE_BUSY },
+ { str_system, 0x37, 0x37, IORESOURCE_BUSY },
+ { str_nmi_control, 0x50, 0x50, IORESOURCE_BUSY },
+ { str_nmi_control, 0x52, 0x52, IORESOURCE_BUSY },
+ { "time stamp", 0x5c, 0x5f, IORESOURCE_BUSY },
+ { str_kanji_rom, 0xa1, 0xa1, IORESOURCE_BUSY },
+ { str_kanji_rom, 0xa3, 0xa3, IORESOURCE_BUSY },
+ { str_kanji_rom, 0xa5, 0xa5, IORESOURCE_BUSY },
+ { str_kanji_rom, 0xa7, 0xa7, IORESOURCE_BUSY },
+ { str_kanji_rom, 0xa9, 0xa9, IORESOURCE_BUSY },
+ { str_keyboard, 0x41, 0x41, IORESOURCE_BUSY },
+ { str_keyboard, 0x43, 0x43, IORESOURCE_BUSY },
+ { str_text_gdc, 0x60, 0x60, IORESOURCE_BUSY },
+ { str_text_gdc, 0x62, 0x62, IORESOURCE_BUSY },
+ { str_text_gdc, 0x64, 0x64, IORESOURCE_BUSY },
+ { str_text_gdc, 0x66, 0x66, IORESOURCE_BUSY },
+ { str_text_gdc, 0x68, 0x68, IORESOURCE_BUSY },
+ { str_text_gdc, 0x6a, 0x6a, IORESOURCE_BUSY },
+ { str_text_gdc, 0x6c, 0x6c, IORESOURCE_BUSY },
+ { str_text_gdc, 0x6e, 0x6e, IORESOURCE_BUSY },
+ { str_crtc, 0x70, 0x70, IORESOURCE_BUSY },
+ { str_crtc, 0x72, 0x72, IORESOURCE_BUSY },
+ { str_crtc, 0x74, 0x74, IORESOURCE_BUSY },
+ { str_crtc, 0x74, 0x74, IORESOURCE_BUSY },
+ { str_crtc, 0x76, 0x76, IORESOURCE_BUSY },
+ { str_crtc, 0x78, 0x78, IORESOURCE_BUSY },
+ { str_crtc, 0x7a, 0x7a, IORESOURCE_BUSY },
+ { str_timer, 0x71, 0x71, IORESOURCE_BUSY },
+ { str_timer, 0x73, 0x73, IORESOURCE_BUSY },
+ { str_timer, 0x75, 0x75, IORESOURCE_BUSY },
+ { str_timer, 0x77, 0x77, IORESOURCE_BUSY },
+ { str_graphic_gdc, 0xa0, 0xa0, IORESOURCE_BUSY },
+ { str_graphic_gdc, 0xa2, 0xa2, IORESOURCE_BUSY },
+ { str_graphic_gdc, 0xa4, 0xa4, IORESOURCE_BUSY },
+ { str_graphic_gdc, 0xa6, 0xa6, IORESOURCE_BUSY },
+ { "cpu", 0xf0, 0xf7, IORESOURCE_BUSY },
+ { "fpu", 0xf8, 0xff, IORESOURCE_BUSY },
+ { str_dma_ex_bank, 0x0e05, 0x0e05, 0 },
+ { str_dma_ex_bank, 0x0e07, 0x0e07, 0 },
+ { str_dma_ex_bank, 0x0e09, 0x0e09, 0 },
+ { str_dma_ex_bank, 0x0e0b, 0x0e0b, 0 },
+ { str_beep_freq, 0x3fd9, 0x3fd9, IORESOURCE_BUSY },
+ { str_beep_freq, 0x3fdb, 0x3fdb, IORESOURCE_BUSY },
+ { str_beep_freq, 0x3fdd, 0x3fdd, IORESOURCE_BUSY },
+ { str_beep_freq, 0x3fdf, 0x3fdf, IORESOURCE_BUSY },
+ /* All PC-9800 have (exactly) one mouse interface. */
+ { str_mouse_pio, 0x7fd9, 0x7fd9, 0 },
+ { str_mouse_pio, 0x7fdb, 0x7fdb, 0 },
+ { str_mouse_pio, 0x7fdd, 0x7fdd, 0 },
+ { str_mouse_pio, 0x7fdf, 0x7fdf, 0 },
+ { "mouse timer", 0xbfdb, 0xbfdb, 0 },
+ { "mouse irq", 0x98d7, 0x98d7, 0 },
+};
+
+#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
+
+static struct resource tvram_resource = { "Text VRAM/CG window", 0xa0000, 0xa4fff, IORESOURCE_BUSY };
+static struct resource gvram_brg_resource = { "Graphic VRAM (B/R/G)", 0xa8000, 0xbffff, IORESOURCE_BUSY };
+static struct resource gvram_e_resource = { "Graphic VRAM (E)", 0xe0000, 0xe7fff, IORESOURCE_BUSY };
+
+/* System ROM resources */
+#define MAXROMS 6
+static struct resource rom_resources[MAXROMS] = {
+ { "System ROM", 0xe8000, 0xfffff, IORESOURCE_BUSY }
+};
+
+static inline void probe_roms(void)
+{
+ int roms = 1;
+ int i;
+ __u8 *xrom_id;
+
+ request_resource(&iomem_resource, rom_resources+0);
+
+ xrom_id = (__u8 *) isa_bus_to_virt(PC9800SCA_XROM_ID + 0x10);
+
+ for (i = 0; i < 16; i++) {
+ if (xrom_id[i] & 0x80) {
+ int j;
+
+ for (j = i + 1; j < 16 && (xrom_id[j] & 0x80); j++)
+ ;
+ rom_resources[roms].start = 0x0d0000 + i * 0x001000;
+ rom_resources[roms].end = 0x0d0000 + j * 0x001000 - 1;
+ rom_resources[roms].name = "Extension ROM";
+ rom_resources[roms].flags = IORESOURCE_BUSY;
+
+ request_resource(&iomem_resource,
+ rom_resources + roms);
+ if (++roms >= MAXROMS)
+ return;
+ }
+ }
+}
+
+static inline void mach_request_resource(void)
+{
+ int i;
+
+ if (PC9800_HIGHRESO_P()) {
+ tvram_resource.start = 0xe0000;
+ tvram_resource.end = 0xe4fff;
+ gvram_brg_resource.name = "Graphic VRAM";
+ gvram_brg_resource.start = 0xc0000;
+ gvram_brg_resource.end = 0xdffff;
+ }
+
+ request_resource(&iomem_resource, &tvram_resource);
+ request_resource(&iomem_resource, &gvram_brg_resource);
+ if (!PC9800_HIGHRESO_P())
+ request_resource(&iomem_resource, &gvram_e_resource);
+
+ for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+ request_resource(&ioport_resource, standard_io_resources + i);
+
+ if (PC9800_HIGHRESO_P() || PC9800_9821_P()) {
+ static char graphics[] = "graphics";
+ static struct resource graphics_resources[] = {
+ { graphics, 0x9a0, 0x9a0, 0 },
+ { graphics, 0x9a2, 0x9a2, 0 },
+ { graphics, 0x9a4, 0x9a4, 0 },
+ { graphics, 0x9a6, 0x9a6, 0 },
+ { graphics, 0x9a8, 0x9a8, 0 },
+ { graphics, 0x9aa, 0x9aa, 0 },
+ { graphics, 0x9ac, 0x9ac, 0 },
+ { graphics, 0x9ae, 0x9ae, 0 },
+ };
+
+#define GRAPHICS_RESOURCES (sizeof(graphics_resources)/sizeof(struct resource))
+
+ for (i = 0; i < GRAPHICS_RESOURCES; i++)
+ request_resource(&ioport_resource, graphics_resources + i);
+ }
+}
+
+#endif /* !_MACH_RESOURCES_H */
diff -Nru linux/include/asm-i386/mach-pc9800/mach_time.h linux98/include/asm-i386/mach-pc9800/mach_time.h
--- linux/include/asm-i386/mach-pc9800/mach_time.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-pc9800/mach_time.h 2002-10-21 11:23:06.000000000 +0900
@@ -0,0 +1,136 @@
+/*
+ * include/asm-i386/mach-pc9800/mach_time.h
+ *
+ * Machine specific set RTC function for PC-9800.
+ * Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TIME_H
+#define _MACH_TIME_H
+
+#include <linux/upd4990a.h>
+
+/* for check timing call set_rtc_mmss() */
+/* used in arch/i386/time.c::do_timer_interrupt() */
+/*
+ * Because PC-9800's RTC (NEC uPD4990A) does not allow setting
+ * time partially, we always have to read-modify-write the
+ * entire time (including year) so that set_rtc_mmss() will
+ * take quite much time to execute. You may want to relax
+ * RTC resetting interval (currently ~11 minuts)...
+ */
+#define TIME1 1000000
+#define TIME2 0
+
+static inline int mach_set_rtc_mmss(unsigned long nowtime)
+{
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+ struct upd4990a_raw_data data;
+
+ upd4990a_get_time(&data, 1);
+ cmos_minutes = (data.min >> 4) * 10 + (data.min & 0xf);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ u8 temp_seconds = (real_seconds / 10) * 16 + real_seconds % 10;
+ u8 temp_minutes = (real_minutes / 10) * 16 + real_minutes % 10;
+
+ if (data.sec != temp_seconds || data.min != temp_minutes) {
+ data.sec = temp_seconds;
+ data.min = temp_minutes;
+ upd4990a_set_time(&data, 1);
+ }
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ /* uPD4990A users' manual says we should issue Register Hold
+ * command after reading time, or future Time Read command
+ * may not work. When we have set the time, this also starts
+ * the clock.
+ */
+ upd4990a_serial_command(UPD4990A_REGISTER_HOLD);
+
+ return retval;
+}
+
+#define RTC_SANITY_CHECK
+
+static inline unsigned long mach_get_cmos_time(void)
+{
+ int i;
+ u8 prev, cur;
+ unsigned int year;
+#ifdef RTC_SANITY_CHECK
+ int retry_count;
+#endif
+
+ struct upd4990a_raw_data data;
+
+#ifdef RTC_SANITY_CHECK
+ retry_count = 0;
+ retry:
+#endif
+ /* Connect uPD4990A's DATA OUT pin to its 1Hz reference clock. */
+ upd4990a_serial_command(UPD4990A_REGISTER_HOLD);
+
+ /* Catch rising edge of reference clock. */
+ prev = ~UPD4990A_READ_DATA();
+ for (i = 0; i < 1800000; i++) { /* may take up to 1 second... */
+ __asm__ ("outb %%al,%0" : : "N" (0x5f)); /* 0.6usec delay */
+ cur = UPD4990A_READ_DATA();
+ if (!(prev & cur & 1))
+ break;
+ prev = ~cur;
+ }
+
+ upd4990a_get_time(&data, 0);
+
+#ifdef RTC_SANITY_CHECK
+# define BCD_VALID_P(x, hi) (((x) & 0x0f) <= 9 && (x) <= 0x ## hi)
+# define DATA ((const unsigned char *) &data)
+
+ if (!BCD_VALID_P(data.sec, 59) ||
+ !BCD_VALID_P(data.min, 59) ||
+ !BCD_VALID_P(data.hour, 23) ||
+ data.mday == 0 || !BCD_VALID_P(data.mday, 31) ||
+ data.wday > 6 ||
+ data.mon < 1 || 12 < data.mon ||
+ !BCD_VALID_P(data.year, 99)) {
+ printk(KERN_ERR "RTC clock data is invalid! "
+ "(%02X %02X %02X %02X %02X %02X) - ",
+ DATA[0], DATA[1], DATA[2], DATA[3], DATA[4], DATA[5]);
+ if (++retry_count < 3) {
+ printk("retrying (%d)\n", retry_count);
+ goto retry;
+ }
+ printk("giving up, continuing\n");
+ }
+
+# undef BCD_VALID_P
+# undef DATA
+#endif /* RTC_SANITY_CHECK */
+
+#define CVT(x) (((x) & 0xF) + ((x) >> 4) * 10)
+ if ((year = CVT(data.year) + 1900) < 1995)
+ year += 100;
+ return mktime(year, data.mon, CVT(data.mday),
+ CVT(data.hour), CVT(data.min), CVT(data.sec));
+#undef CVT
+}
+
+#endif /* !_MACH_TIME_H */
diff -Nru linux/include/asm-i386/mach-pc9800/mach_traps.h linux98/include/asm-i386/mach-pc9800/mach_traps.h
--- linux/include/asm-i386/mach-pc9800/mach_traps.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-pc9800/mach_traps.h 2002-11-05 22:46:55.000000000 +0900
@@ -0,0 +1,27 @@
+/*
+ * include/asm-i386/mach-pc9800/mach_traps.h
+ *
+ * Machine specific NMI handling for PC-9800.
+ * Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TRAPS_H
+#define _MACH_TRAPS_H
+
+static inline void clear_mem_error(unsigned char reason)
+{
+ outb(0x08, 0x37);
+ outb(0x09, 0x37);
+}
+
+static inline unsigned char get_nmi_reason(void)
+{
+ return (inb(0x33) & 6) ? 0x80 : 0;
+}
+
+static inline void reassert_nmi(void)
+{
+ outb(0x09, 0x50); /* disable NMI once */
+ outb(0x09, 0x52); /* re-enable it */
+}
+
+#endif /* !_MACH_TRAPS_H */
diff -Nru linux/include/asm-i386/mach-pc9800/smpboot_hooks.h linux98/include/asm-i386/mach-pc9800/smpboot_hooks.h
--- linux/include/asm-i386/mach-pc9800/smpboot_hooks.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-pc9800/smpboot_hooks.h 2002-09-22 06:56:46.000000000 +0900
@@ -0,0 +1,33 @@
+/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
+ * which needs to alter them. */
+
+static inline void smpboot_clear_io_apic_irqs(void)
+{
+ io_apic_irqs = 0;
+}
+
+static inline void smpboot_setup_warm_reset_vector(void)
+{
+ /*
+ * Install writable page 0 entry to set BIOS data area.
+ */
+ local_flush_tlb();
+
+ /*
+ * Paranoid: Set warm reset code and vector here back
+ * to default values.
+ */
+ outb(0x0f, 0x37); /* SHUT0 = 1 */
+
+ *((volatile long *) phys_to_virt(0x404)) = 0;
+}
+
+static inline void smpboot_setup_io_apic(void)
+{
+ /*
+ * Here we can be sure that there is an IO-APIC in the system. Let's
+ * go and set it up:
+ */
+ if (!skip_ioapic_setup && nr_ioapics)
+ setup_IO_APIC();
+}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/