I'm resending the last batch of changesets, cleaned up and merged from
37 into just 14. They all are re-applied to current 2.5.60 to avoid any
need of merges.
You can pull this changeset from:
bk://kernel.bkbits.net/vojtech/input
===================================================================
ChangeSet@1.1004, 2003-02-12 10:24:25+01:00, vojtech@suse.cz
input: Update AT+PS/2 mouse and keyboard drivers:
- Fix a possible deadlock with 0xfe resend command (atkbd)
- Make ->ack variables volatile (they're updated from irq)
- Fix the GETID one/two byte command to avoid any races
- Fix Logitech PS2++ extended packet detection
- Use RESET_BAT on reboot to make notebooks happy
keyboard/atkbd.c | 56 ++++++++++++++++++++++++++++++++-----------------------
mouse/psmouse.c | 36 ++++++++++++++++++++++-------------
2 files changed, 56 insertions(+), 36 deletions(-)
===================================================================
diff -Nru a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
--- a/drivers/input/keyboard/atkbd.c Wed Feb 12 11:57:28 2003
+++ b/drivers/input/keyboard/atkbd.c Wed Feb 12 11:57:28 2003
@@ -86,8 +86,7 @@
#define ATKBD_CMD_SETLEDS 0x10ed
#define ATKBD_CMD_GSCANSET 0x11f0
#define ATKBD_CMD_SSCANSET 0x10f0
-#define ATKBD_CMD_GETID 0x01f2
-#define ATKBD_CMD_GETID2 0x0100
+#define ATKBD_CMD_GETID 0x02f2
#define ATKBD_CMD_ENABLE 0x00f4
#define ATKBD_CMD_RESET_DIS 0x00f5
#define ATKBD_CMD_RESET_BAT 0x01ff
@@ -120,12 +119,12 @@
unsigned char cmdbuf[4];
unsigned char cmdcnt;
unsigned char set;
- unsigned char oldset;
unsigned char release;
- signed char ack;
+ volatile signed char ack;
unsigned char emul;
unsigned short id;
unsigned char write;
+ unsigned char resend;
};
/*
@@ -142,11 +141,15 @@
printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
#endif
- if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && atkbd->write) {
+ if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) {
printk("atkbd.c: frame/parity error: %02x\n", flags);
serio_write(serio, ATKBD_CMD_RESEND);
+ atkbd->resend = 1;
return;
}
+
+ if (!flags)
+ atkbd->resend = 0;
switch (code) {
case ATKBD_RET_ACK:
@@ -227,12 +230,15 @@
static int atkbd_command(struct atkbd *atkbd, unsigned char *param, int command)
{
- int timeout = 50000; /* 500 msec */
+ int timeout = 500000; /* 500 msec */
int send = (command >> 12) & 0xf;
int receive = (command >> 8) & 0xf;
int i;
atkbd->cmdcnt = receive;
+
+ if (command == ATKBD_CMD_RESET_BAT)
+ timeout = 2000000; /* 2 sec */
if (command & 0xff)
if (atkbd_sendbyte(atkbd, command & 0xff))
@@ -242,14 +248,28 @@
if (atkbd_sendbyte(atkbd, param[i]))
return (atkbd->cmdcnt = 0) - 1;
- while (atkbd->cmdcnt && timeout--) udelay(10);
+ while (atkbd->cmdcnt && timeout--) {
+
+ if (atkbd->cmdcnt == 1 && command == ATKBD_CMD_RESET_BAT)
+ timeout = 100000;
+
+ if (atkbd->cmdcnt == 1 && command == ATKBD_CMD_GETID &&
+ atkbd->cmdbuf[1] != 0xab && atkbd->cmdbuf[1] != 0xac) {
+ atkbd->cmdcnt = 0;
+ break;
+ }
+
+ udelay(1);
+ }
if (param)
for (i = 0; i < receive; i++)
param[i] = atkbd->cmdbuf[(receive - 1) - i];
- if (atkbd->cmdcnt)
- return (atkbd->cmdcnt = 0) - 1;
+ if (atkbd->cmdcnt) {
+ atkbd->cmdcnt = 0;
+ return -1;
+ }
return 0;
}
@@ -303,13 +323,6 @@
unsigned char param[2];
/*
- * Remember original scancode set value, so that we can restore it on exit.
- */
-
- if (atkbd_command(atkbd, &atkbd->oldset, ATKBD_CMD_GSCANSET))
- atkbd->oldset = 2;
-
-/*
* For known special keyboards we can go ahead and set the correct set.
* We check for NCD PS/2 Sun, NorthGate OmniKey 101 and
* IBM RapidAccess / IBM EzButton / Chicony KBP-8993 keyboards.
@@ -376,8 +389,8 @@
*/
if (atkbd_reset)
- if (atkbd_command(atkbd, NULL, ATKBD_CMD_RESET_BAT))
- printk(KERN_WARNING "atkbd.c: keyboard reset failed\n");
+ if (atkbd_command(atkbd, NULL, ATKBD_CMD_RESET_BAT))
+ printk(KERN_WARNING "atkbd.c: keyboard reset failed on %s\n", atkbd->serio->phys);
/*
* Then we check the keyboard ID. We should get 0xab83 under normal conditions.
@@ -401,10 +414,7 @@
if (param[0] != 0xab && param[0] != 0xac)
return -1;
- atkbd->id = param[0] << 8;
- if (atkbd_command(atkbd, param, ATKBD_CMD_GETID2))
- return -1;
- atkbd->id |= param[0];
+ atkbd->id = (param[0] << 8) | param[1];
/*
* Set the LEDs to a defined state.
@@ -442,7 +452,7 @@
static void atkbd_cleanup(struct serio *serio)
{
struct atkbd *atkbd = serio->private;
- atkbd_command(atkbd, &atkbd->oldset, ATKBD_CMD_SSCANSET);
+ atkbd_command(atkbd, NULL, ATKBD_CMD_RESET_BAT);
}
/*
diff -Nru a/drivers/input/mouse/psmouse.c b/drivers/input/mouse/psmouse.c
--- a/drivers/input/mouse/psmouse.c Wed Feb 12 11:57:28 2003
+++ b/drivers/input/mouse/psmouse.c Wed Feb 12 11:57:28 2003
@@ -30,8 +30,7 @@
#define PSMOUSE_CMD_GETINFO 0x03e9
#define PSMOUSE_CMD_SETSTREAM 0x00ea
#define PSMOUSE_CMD_POLL 0x03eb
-#define PSMOUSE_CMD_GETID 0x01f2
-#define PSMOUSE_CMD_GETID2 0x0100
+#define PSMOUSE_CMD_GETID 0x02f2
#define PSMOUSE_CMD_SETRATE 0x10f3
#define PSMOUSE_CMD_ENABLE 0x00f4
#define PSMOUSE_CMD_RESET_DIS 0x00f6
@@ -54,7 +53,7 @@
unsigned char model;
unsigned long last;
char acking;
- char ack;
+ volatile char ack;
char error;
char devname[64];
char phys[32];
@@ -85,9 +84,9 @@
if (psmouse->type == PSMOUSE_PS2PP || psmouse->type == PSMOUSE_PS2TPP) {
- if ((packet[0] & 0x40) == 0x40 && (int) packet[1] - (int) ((packet[0] & 0x10) << 4) > 191 ) {
+ if ((packet[0] & 0x40) == 0x40 && abs((int)packet[1] - (((int)packet[0] & 0x10) << 4)) > 191 ) {
- switch (((packet[1] >> 4) & 0x03) | ((packet[0] >> 2) & 0xc0)) {
+ switch (((packet[1] >> 4) & 0x03) | ((packet[0] >> 2) & 0x0c)) {
case 1: /* Mouse extra info */
@@ -106,10 +105,11 @@
break;
+#ifdef DEBUG
default:
-
printk(KERN_WARNING "psmouse.c: Received PS2++ packet #%x, but don't know how to handle.\n",
- ((packet[1] >> 4) & 0x03) | ((packet[0] >> 2) & 0xc0));
+ ((packet[1] >> 4) & 0x03) | ((packet[0] >> 2) & 0x0c));
+#endif
}
@@ -248,6 +248,9 @@
psmouse->cmdcnt = receive;
+ if (command == PSMOUSE_CMD_RESET_BAT)
+ timeout = 2000000; /* 2 sec */
+
if (command & 0xff)
if (psmouse_sendbyte(psmouse, command & 0xff))
return (psmouse->cmdcnt = 0) - 1;
@@ -256,7 +259,19 @@
if (psmouse_sendbyte(psmouse, param[i]))
return (psmouse->cmdcnt = 0) - 1;
- while (psmouse->cmdcnt && timeout--) udelay(1);
+ while (psmouse->cmdcnt && timeout--) {
+
+ if (psmouse->cmdcnt == 1 && command == PSMOUSE_CMD_RESET_BAT)
+ timeout = 100000;
+
+ if (psmouse->cmdcnt == 1 && command == PSMOUSE_CMD_GETID &&
+ psmouse->cmdbuf[1] != 0xab && psmouse->cmdbuf[1] != 0xac) {
+ psmouse->cmdcnt = 0;
+ break;
+ }
+
+ udelay(1);
+ }
for (i = 0; i < receive; i++)
param[i] = psmouse->cmdbuf[(receive - 1) - i];
@@ -497,11 +512,6 @@
if (psmouse_command(psmouse, param, PSMOUSE_CMD_GETID))
return -1;
-
- if (param[0] == 0xab || param[0] == 0xac) {
- psmouse_command(psmouse, param, PSMOUSE_CMD_GETID2);
- return -1;
- }
if (param[0] != 0x00 && param[0] != 0x03 && param[0] != 0x04)
return -1;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/