One of our servers started getting repeated errors like the one below:
Feb 7 02:39:03 xxx kernel: KERNEL: assertion (newsk->state !=
TCP_SYN_RECV) failed at tcp.c(2229)
Feb 7 02:39:03 xxx kernel: KERNEL: assertion
((1<<sk2->state)&(TCPF_ESTABLISHED|TCPF_CLOSE_WAIT|TCPF_CLOSE)) failed at
af_inet.c(689)
Any ideas why? Please cc response to my address.
Sys info below.
Kind regards,
Lucian Kafka
www.conexim.com.au
Linux version 2.4.20 (root@xxx) (gcc version 2.96 20000731 (Red Hat Linux
7.1 2.96-85)) #1 Tue Dec 3 13:03:44 EST 2002
i686 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.10.91.0.2
util-linux 2.11f
mount 2.11b
modutils 2.4.18
e2fsprogs 1.26
isdn4k-utils 3.1pre1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.57
Console-tools 0.3.3
Sh-utils 2.0
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
4000-403f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
5000-501f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
d000-dfff : PCI Bus #01
e000-e01f : Intel Corp. 82371AB/EB/MB PIIX4 USB
e400-e43f : Intel Corp. 82557/8/9 [Ethernet Pro 100]
e400-e43f : eepro100
f000-f00f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c8fff : Extension ROM
000f0000-000fffff : System ROM
00100000-17feffff : System RAM
00100000-001dd191 : Kernel code
001dd192-0021685f : Kernel data
17ff0000-17ff2fff : ACPI Non-volatile Storage
17ff3000-17ffffff : ACPI Tables
d8000000-dbffffff : Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
dc000000-dfffffff : PCI Bus #01
dd000000-dd7fffff : Texas Instruments TVP4010 [Permedia]
dd800000-ddffffff : Texas Instruments TVP4010 [Permedia]
de000000-de01ffff : Texas Instruments TVP4010 [Permedia]
e1000000-e10fffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
e1100000-e1100fff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
e1100000-e1100fff : eepro100
ffff0000-ffffffff : reserved
lspci -vvv
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev
02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dc000000-dfffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e000 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0b.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Management Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e1100000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e400 [size=64]
Region 2: Memory at e1000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at e0000000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
01:00.0 VGA compatible controller: Texas Instruments TVP4010 [Permedia]
(rev 01) (prog-if 00 [VGA])
Subsystem: 3DLabs: Unknown device 0096
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at dd800000 (32-bit, non-prefetchable) [size=8M]
Region 2: Memory at dd000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/