>On Thu, Jan 02, 2003 at 07:37:49PM +0000, Alan Cox wrote:
>
>
>>On Thu, 2003-01-02 at 18:29, Teodor Iacob wrote:
>>
>>
>>>Hello,
>>>
>>>Today i mounted a HDD on my secondary IDE on a 40 pin cable and surprise
>>>the kernel set it up on UDMA 133:
>>>
>>>hdd: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=119150/16/63, UDMA(133)
>>>
>>>
>>What controller and disks ?
>>
>>
>
>Sorry I didn't append this info from the first time.. there it goes:
>
>00:11.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 06)
>
>hdd: Maxtor 6Y060L0, ATA DISK drive
>
>the harddisk is DiamondPlus9 60GB 7200 rpm UDMA133 .. and the mainbboard is Soltek 75-FRV
>with KT400 chipset
>
>
What's hdc? Hdd is the secondary slave. If it's the only device on
the chain you should make sure you jumper the drive as a master.
-- There is no such thing as obsolete hardware. Merely hardware that other people don't want. (The Second Rule of Hardware Acquisition) Sam Flory <sflory@rackable.com>
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/