[PROBLEM][2.5.52][USB] USB Device unusable

[Shawn Starr]

* NOTE: This is -mm2. I will be compiling 2.5.53 (-mm1) today and test this as 
well.

Initial Power on of USB Device:

ehci-hcd 02:08.2: GetStatus port 2 status 001803 POWER sig=j  CSC CONNECT
hub 1-0:0: port 2, status 501, change 1, 480 Mb/s
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x501
hub 1-0:0: port 2 not reset yet, waiting 10ms
hub 1-0:0: port 2 not reset yet, waiting 10ms
hub 1-0:0: port 2 not reset yet, waiting 200ms
ehci-hcd 02:08.2: port 2 full speed --> companion
ehci-hcd 02:08.2: GetStatus port 2 status 003801 POWER OWNER sig=j  CONNECT
drivers/usb/host/ehci-hcd.c: 02:08.2: free_config devnum 0
drivers/usb/host/ohci-hub.c: 02:08.1: GetStatus roothub.portstatus [1] =
0x00010101 CSC PPS CCS
hub 3-0:0: port 1, status 101, change 1, 12 Mb/s
hub 3-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
drivers/usb/host/ohci-hub.c: 02:08.1: GetStatus roothub.portstatus [1] = 
0x00100103 PRSC PPS PES CCS
hub 3-0:0: new USB device on port 1, assigned address 4
drivers/usb/core/usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
Product: JamC@m 2.? OR JamC@m 2.0 OR JamC@m 2.0__________ depending on 
connection quality (?)
Manufacturer: KBGear Interactive
drivers/usb/core/usb.c: usb_new_device - registering 3-1:0

When attempting to configure device:

drivers/usb/core/usb.c: usbfs driver claimed interface d0447c80
drivers/usb/host/ohci-q.c: urb cf17e0c0 usb-02:08.1-1 ep-0-OUT cc 4 --> status 
-32
usbfs: USBDEVFS_CONTROL failed dev 5 rqt 64 rq 165 len 0 ret -32
drivers/usb/host/ohci-q.c: urb cf17e0c0 usb-02:08.1-1 ep-1-IN cc 8 --> status 
-75
usbfs: USBDEVFS_BULK failed dev 5 ep 0x81 len 12 ret -75