This patch means we can create multiple subarches without copying
every single file that any subarch wants into all the directories.
And is much tidier, IMHO.
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/Makefile 01-subarch/arch/i386/Makefile
--- 00-virgin/arch/i386/Makefile Fri Dec 13 23:17:51 2002
+++ 01-subarch/arch/i386/Makefile Sun Dec 22 12:08:42 2002
@@ -46,25 +46,31 @@ cflags-$(CONFIG_MCYRIXIII) += $(call che
CFLAGS += $(cflags-y)
-ifdef CONFIG_VISWS
-MACHINE := mach-visws
-else
-MACHINE := mach-generic
-endif
+#default subarch .c files
+mcore-y := mach-default
+
+#VISWS subarch support
+mflags-$(CONFIG_VISWS) := -Iinclude/asm-i386/mach-visws
+mcore-$(CONFIG_VISWS) := mach-visws
+
+#add other subarch support here
+
+#default subarch .h files
+mflags-y += -Iinclude/asm-i386/mach-default
HEAD := arch/i386/kernel/head.o arch/i386/kernel/init_task.o
libs-y += arch/i386/lib/
core-y += arch/i386/kernel/ \
arch/i386/mm/ \
- arch/i386/$(MACHINE)/
+ arch/i386/$(mcore-y)/
drivers-$(CONFIG_MATH_EMULATION) += arch/i386/math-emu/
drivers-$(CONFIG_PCI) += arch/i386/pci/
# FIXME: is drivers- right ?
drivers-$(CONFIG_OPROFILE) += arch/i386/oprofile/
-CFLAGS += -Iarch/i386/$(MACHINE)
-AFLAGS += -Iarch/i386/$(MACHINE)
+CFLAGS += $(mflags-y)
+AFLAGS += $(mflags-y)
makeboot =$(Q)$(MAKE) -f scripts/Makefile.build obj=arch/i386/boot $(1)
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/kernel/apic.c 01-subarch/arch/i386/kernel/apic.c
--- 00-virgin/arch/i386/kernel/apic.c Sun Nov 17 20:29:58 2002
+++ 01-subarch/arch/i386/kernel/apic.c Sun Dec 22 12:08:42 2002
@@ -31,7 +31,8 @@
#include <asm/pgalloc.h>
#include <asm/desc.h>
#include <asm/arch_hooks.h>
-#include "mach_apic.h"
+
+#include <mach_apic.h>
void __init apic_intr_init(void)
{
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/kernel/io_apic.c 01-subarch/arch/i386/kernel/io_apic.c
--- 00-virgin/arch/i386/kernel/io_apic.c Fri Dec 13 23:17:51 2002
+++ 01-subarch/arch/i386/kernel/io_apic.c Sun Dec 22 12:08:42 2002
@@ -35,7 +35,8 @@
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/desc.h>
-#include "mach_apic.h"
+
+#include <mach_apic.h>
#undef APIC_LOCKUP_DEBUG
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/kernel/mpparse.c 01-subarch/arch/i386/kernel/mpparse.c
--- 00-virgin/arch/i386/kernel/mpparse.c Sun Nov 17 20:29:30 2002
+++ 01-subarch/arch/i386/kernel/mpparse.c Sun Dec 22 12:08:42 2002
@@ -30,7 +30,8 @@
#include <asm/mpspec.h>
#include <asm/pgalloc.h>
#include <asm/io_apic.h>
-#include "mach_apic.h"
+
+#include <mach_apic.h>
/* Have we found an MP table */
int smp_found_config;
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/kernel/smpboot.c 01-subarch/arch/i386/kernel/smpboot.c
--- 00-virgin/arch/i386/kernel/smpboot.c Sun Dec 1 09:59:46 2002
+++ 01-subarch/arch/i386/kernel/smpboot.c Sun Dec 22 12:08:42 2002
@@ -51,7 +51,8 @@
#include <asm/desc.h>
#include <asm/arch_hooks.h>
#include "smpboot_hooks.h"
-#include "mach_apic.h"
+
+#include <mach_apic.h>
/* Set if we find a B stepping CPU */
static int __initdata smp_b_stepping;
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-default/Makefile 01-subarch/arch/i386/mach-default/Makefile
--- 00-virgin/arch/i386/mach-default/Makefile Wed Dec 31 16:00:00 1969
+++ 01-subarch/arch/i386/mach-default/Makefile Sun Dec 22 12:08:42 2002
@@ -0,0 +1,7 @@
+#
+# Makefile for the linux kernel.
+#
+
+EXTRA_CFLAGS += -I../kernel
+
+obj-y := setup.o topology.o
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-default/setup.c 01-subarch/arch/i386/mach-default/setup.c
--- 00-virgin/arch/i386/mach-default/setup.c Wed Dec 31 16:00:00 1969
+++ 01-subarch/arch/i386/mach-default/setup.c Sun Dec 22 12:08:42 2002
@@ -0,0 +1,104 @@
+/*
+ * Machine specific setup for generic
+ */
+
+#include <linux/config.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/arch_hooks.h>
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ * Perform any necessary interrupt initialisation prior to setting up
+ * the "ordinary" interrupt call gates. For legacy reasons, the ISA
+ * interrupts should be initialised here if the machine emulates a PC
+ * in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+ init_ISA_irqs();
+}
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = { no_action, 0, 0, "cascade", NULL, NULL};
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ * Fill in any interrupts that may have been left out by the general
+ * init_IRQ() routine. interrupts having to do with the machine rather
+ * than the devices on the I/O bus (like APIC interrupts in intel MP
+ * systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ apic_intr_init();
+#endif
+
+ setup_irq(2, &irq2);
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ * generally used to activate any machine specific identification
+ * routines that may be needed before setup_arch() runs. On VISWS
+ * this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ * Called as the final act of trap_init(). Used in VISWS to initialise
+ * the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+}
+
+static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL};
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ * Must plug the system timer interrupt source at HZ into the IRQ listed
+ * in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+ setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ * The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources
+ * along the MCA bus. Use this to hook into that chain if you will need
+ * it.
+ **/
+void __init mca_nmi_hook(void)
+{
+ /* If I recall correctly, there's a whole bunch of other things that
+ * we can do to check for NMI problems, but that's all I know about
+ * at the moment.
+ */
+
+ printk("NMI generated from unknown source!\n");
+}
+#endif
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-default/topology.c 01-subarch/arch/i386/mach-default/topology.c
--- 00-virgin/arch/i386/mach-default/topology.c Wed Dec 31 16:00:00 1969
+++ 01-subarch/arch/i386/mach-default/topology.c Sun Dec 22 12:08:42 2002
@@ -0,0 +1,68 @@
+/*
+ * arch/i386/mach-generic/topology.c - Populate driverfs with topology information
+ *
+ * Written by: Matthew Dobson, IBM Corporation
+ * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/cpu.h>
+
+struct i386_cpu cpu_devices[NR_CPUS];
+
+#ifdef CONFIG_NUMA
+#include <linux/mmzone.h>
+#include <asm/node.h>
+#include <asm/memblk.h>
+
+struct i386_node node_devices[MAX_NUMNODES];
+struct i386_memblk memblk_devices[MAX_NR_MEMBLKS];
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for (i = 0; i < num_online_nodes(); i++)
+ arch_register_node(i);
+ for (i = 0; i < NR_CPUS; i++)
+ if (cpu_possible(i)) arch_register_cpu(i);
+ for (i = 0; i < num_online_memblks(); i++)
+ arch_register_memblk(i);
+ return 0;
+}
+
+#else /* !CONFIG_NUMA */
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for (i = 0; i < NR_CPUS; i++)
+ if (cpu_possible(i)) arch_register_cpu(i);
+ return 0;
+}
+
+#endif /* CONFIG_NUMA */
+
+subsys_initcall(topology_init);
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-generic/Makefile 01-subarch/arch/i386/mach-generic/Makefile
--- 00-virgin/arch/i386/mach-generic/Makefile Mon Dec 16 21:50:37 2002
+++ 01-subarch/arch/i386/mach-generic/Makefile Wed Dec 31 16:00:00 1969
@@ -1,7 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-EXTRA_CFLAGS += -I../kernel
-
-obj-y := setup.o topology.o
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-generic/do_timer.h 01-subarch/arch/i386/mach-generic/do_timer.h
--- 00-virgin/arch/i386/mach-generic/do_timer.h Sun Nov 17 20:29:54 2002
+++ 01-subarch/arch/i386/mach-generic/do_timer.h Wed Dec 31 16:00:00 1969
@@ -1,82 +0,0 @@
-/* defines for inline arch setup functions */
-
-#include <asm/apic.h>
-
-/**
- * do_timer_interrupt_hook - hook into timer tick
- * @regs: standard registers from interrupt
- *
- * Description:
- * This hook is called immediately after the timer interrupt is ack'd.
- * It's primary purpose is to allow architectures that don't possess
- * individual per CPU clocks (like the CPU APICs supply) to broadcast the
- * timer interrupt as a means of triggering reschedules etc.
- **/
-
-static inline void do_timer_interrupt_hook(struct pt_regs *regs)
-{
- do_timer(regs);
-/*
- * In the SMP case we use the local APIC timer interrupt to do the
- * profiling, except when we simulate SMP mode on a uniprocessor
- * system, in that case we have to call the local interrupt handler.
- */
-#ifndef CONFIG_X86_LOCAL_APIC
- x86_do_profile(regs);
-#else
- if (!using_apic_timer)
- smp_local_timer_interrupt(regs);
-#endif
-}
-
-
-/* you can safely undefine this if you don't have the Neptune chipset */
-
-#define BUGGY_NEPTUN_TIMER
-
-/**
- * do_timer_overflow - process a detected timer overflow condition
- * @count: hardware timer interrupt count on overflow
- *
- * Description:
- * This call is invoked when the jiffies count has not incremented but
- * the hardware timer interrupt has. It means that a timer tick interrupt
- * came along while the previous one was pending, thus a tick was missed
- **/
-static inline int do_timer_overflow(int count)
-{
- int i;
-
- spin_lock(&i8259A_lock);
- /*
- * This is tricky when I/O APICs are used;
- * see do_timer_interrupt().
- */
- i = inb(0x20);
- spin_unlock(&i8259A_lock);
-
- /* assumption about timer being IRQ0 */
- if (i & 0x01) {
- /*
- * We cannot detect lost timer interrupts ...
- * well, that's why we call them lost, don't we? :)
- * [hmm, on the Pentium and Alpha we can ... sort of]
- */
- count -= LATCH;
- } else {
-#ifdef BUGGY_NEPTUN_TIMER
- /*
- * for the Neptun bug we know that the 'latch'
- * command doesnt latch the high and low value
- * of the counter atomically. Thus we have to
- * substract 256 from the counter
- * ... funny, isnt it? :)
- */
-
- count -= 256;
-#else
- printk("do_slow_gettimeoffset(): hardware timer problem?\n");
-#endif
- }
- return count;
-}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-generic/entry_arch.h 01-subarch/arch/i386/mach-generic/entry_arch.h
--- 00-virgin/arch/i386/mach-generic/entry_arch.h Sun Nov 17 20:29:20 2002
+++ 01-subarch/arch/i386/mach-generic/entry_arch.h Wed Dec 31 16:00:00 1969
@@ -1,34 +0,0 @@
-/*
- * This file is designed to contain the BUILD_INTERRUPT specifications for
- * all of the extra named interrupt vectors used by the architecture.
- * Usually this is the Inter Process Interrupts (IPIs)
- */
-
-/*
- * The following vectors are part of the Linux architecture, there
- * is no hardware IRQ pin equivalent for them, they are triggered
- * through the ICC by us (IPIs)
- */
-#ifdef CONFIG_X86_SMP
-BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
-BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
-BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
-#endif
-
-/*
- * every pentium local APIC has two 'local interrupts', with a
- * soft-definable vector attached to both interrupts, one of
- * which is a timer interrupt, the other one is error counter
- * overflow. Linux uses the local APIC timer interrupt to get
- * a much simpler SMP time architecture:
- */
-#ifdef CONFIG_X86_LOCAL_APIC
-BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
-BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
-BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
-
-#ifdef CONFIG_X86_MCE_P4THERMAL
-BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
-#endif
-
-#endif
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-generic/irq_vectors.h 01-subarch/arch/i386/mach-generic/irq_vectors.h
--- 00-virgin/arch/i386/mach-generic/irq_vectors.h Sun Nov 17 20:29:29 2002
+++ 01-subarch/arch/i386/mach-generic/irq_vectors.h Wed Dec 31 16:00:00 1969
@@ -1,85 +0,0 @@
-/*
- * This file should contain #defines for all of the interrupt vector
- * numbers used by this architecture.
- *
- * In addition, there are some standard defines:
- *
- * FIRST_EXTERNAL_VECTOR:
- * The first free place for external interrupts
- *
- * SYSCALL_VECTOR:
- * The IRQ vector a syscall makes the user to kernel transition
- * under.
- *
- * TIMER_IRQ:
- * The IRQ number the timer interrupt comes in at.
- *
- * NR_IRQS:
- * The total number of interrupt vectors (including all the
- * architecture specific interrupts) needed.
- *
- */
-#ifndef _ASM_IRQ_VECTORS_H
-#define _ASM_IRQ_VECTORS_H
-
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR 0x20
-
-#define SYSCALL_VECTOR 0x80
-
-/*
- * Vectors 0x20-0x2f are used for ISA interrupts.
- */
-
-/*
- * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
- *
- * some of the following vectors are 'rare', they are merged
- * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
- * TLB, reschedule and local APIC vectors are performance-critical.
- *
- * Vectors 0xf0-0xfa are free (reserved for future Linux use).
- */
-#define SPURIOUS_APIC_VECTOR 0xff
-#define ERROR_APIC_VECTOR 0xfe
-#define INVALIDATE_TLB_VECTOR 0xfd
-#define RESCHEDULE_VECTOR 0xfc
-#define CALL_FUNCTION_VECTOR 0xfb
-
-#define THERMAL_APIC_VECTOR 0xf0
-/*
- * Local APIC timer IRQ vector is on a different priority level,
- * to work around the 'lost local interrupt if more than 2 IRQ
- * sources per level' errata.
- */
-#define LOCAL_TIMER_VECTOR 0xef
-
-/*
- * First APIC vector available to drivers: (vectors 0x30-0xee)
- * we start at 0x31 to spread out vectors evenly between priority
- * levels. (0x80 is the syscall vector)
- */
-#define FIRST_DEVICE_VECTOR 0x31
-#define FIRST_SYSTEM_VECTOR 0xef
-
-#define TIMER_IRQ 0
-
-/*
- * 16 8259A IRQ's, 208 potential APIC interrupt sources.
- * Right now the APIC is mostly only used for SMP.
- * 256 vectors is an architectural limit. (we can have
- * more than 256 devices theoretically, but they will
- * have to use shared interrupts)
- * Since vectors 0x00-0x1f are used/reserved for the CPU,
- * the usable vector space is 0x20-0xff (224 vectors)
- */
-#ifdef CONFIG_X86_IO_APIC
-#define NR_IRQS 224
-#else
-#define NR_IRQS 16
-#endif
-
-#endif /* _ASM_IRQ_VECTORS_H */
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-generic/mach_apic.h 01-subarch/arch/i386/mach-generic/mach_apic.h
--- 00-virgin/arch/i386/mach-generic/mach_apic.h Sun Nov 17 20:29:58 2002
+++ 01-subarch/arch/i386/mach-generic/mach_apic.h Wed Dec 31 16:00:00 1969
@@ -1,46 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-static inline unsigned long calculate_ldr(unsigned long old)
-{
- unsigned long id;
-
- id = 1UL << smp_processor_id();
- return ((old & ~APIC_LDR_MASK) | SET_APIC_LOGICAL_ID(id));
-}
-
-#define APIC_DFR_VALUE (APIC_DFR_FLAT)
-
-#ifdef CONFIG_SMP
- #define TARGET_CPUS (clustered_apic_mode ? 0xf : cpu_online_map)
-#else
- #define TARGET_CPUS 0x01
-#endif
-
-#define APIC_BROADCAST_ID 0x0F
-#define check_apicid_used(bitmap, apicid) (bitmap & (1 << apicid))
-
-static inline void summit_check(char *oem, char *productid)
-{
-}
-
-static inline void clustered_apic_check(void)
-{
- printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
- (clustered_apic_mode ? "NUMA-Q" : "Flat"), nr_ioapics);
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
- if (clustered_apic_mode)
- return ( ((mps_cpu/4)*16) + (1<<(mps_cpu%4)) );
- else
- return mps_cpu;
-}
-
-static inline unsigned long apicid_to_cpu_present(int apicid)
-{
- return (1ul << apicid);
-}
-
-#endif /* __ASM_MACH_APIC_H */
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-generic/setup.c 01-subarch/arch/i386/mach-generic/setup.c
--- 00-virgin/arch/i386/mach-generic/setup.c Sun Nov 17 20:29:31 2002
+++ 01-subarch/arch/i386/mach-generic/setup.c Wed Dec 31 16:00:00 1969
@@ -1,104 +0,0 @@
-/*
- * Machine specific setup for generic
- */
-
-#include <linux/config.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/arch_hooks.h>
-
-/**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
- *
- * Description:
- * Perform any necessary interrupt initialisation prior to setting up
- * the "ordinary" interrupt call gates. For legacy reasons, the ISA
- * interrupts should be initialised here if the machine emulates a PC
- * in any way.
- **/
-void __init pre_intr_init_hook(void)
-{
- init_ISA_irqs();
-}
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = { no_action, 0, 0, "cascade", NULL, NULL};
-
-/**
- * intr_init_hook - post gate setup interrupt initialisation
- *
- * Description:
- * Fill in any interrupts that may have been left out by the general
- * init_IRQ() routine. interrupts having to do with the machine rather
- * than the devices on the I/O bus (like APIC interrupts in intel MP
- * systems) are started here.
- **/
-void __init intr_init_hook(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
- apic_intr_init();
-#endif
-
- setup_irq(2, &irq2);
-}
-
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- * generally used to activate any machine specific identification
- * routines that may be needed before setup_arch() runs. On VISWS
- * this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-}
-
-/**
- * trap_init_hook - initialise system specific traps
- *
- * Description:
- * Called as the final act of trap_init(). Used in VISWS to initialise
- * the various board specific APIC traps.
- **/
-void __init trap_init_hook(void)
-{
-}
-
-static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL};
-
-/**
- * time_init_hook - do any specific initialisations for the system timer.
- *
- * Description:
- * Must plug the system timer interrupt source at HZ into the IRQ listed
- * in irq_vectors.h:TIMER_IRQ
- **/
-void __init time_init_hook(void)
-{
- setup_irq(0, &irq0);
-}
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- * The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources
- * along the MCA bus. Use this to hook into that chain if you will need
- * it.
- **/
-void __init mca_nmi_hook(void)
-{
- /* If I recall correctly, there's a whole bunch of other things that
- * we can do to check for NMI problems, but that's all I know about
- * at the moment.
- */
-
- printk("NMI generated from unknown source!\n");
-}
-#endif
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-generic/setup_arch_post.h 01-subarch/arch/i386/mach-generic/setup_arch_post.h
--- 00-virgin/arch/i386/mach-generic/setup_arch_post.h Sun Nov 17 20:29:52 2002
+++ 01-subarch/arch/i386/mach-generic/setup_arch_post.h Wed Dec 31 16:00:00 1969
@@ -1,40 +0,0 @@
-/**
- * machine_specific_memory_setup - Hook for machine specific memory setup.
- *
- * Description:
- * This is included late in kernel/setup.c so that it can make
- * use of all of the static functions.
- **/
-
-static inline char * __init machine_specific_memory_setup(void)
-{
- char *who;
-
-
- who = "BIOS-e820";
-
- /*
- * Try to copy the BIOS-supplied E820-map.
- *
- * Otherwise fake a memory map; one section from 0k->640k,
- * the next section from 1mb->appropriate_mem_k
- */
- sanitize_e820_map(E820_MAP, &E820_MAP_NR);
- if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
- unsigned long mem_size;
-
- /* compare results from other methods and take the greater */
- if (ALT_MEM_K < EXT_MEM_K) {
- mem_size = EXT_MEM_K;
- who = "BIOS-88";
- } else {
- mem_size = ALT_MEM_K;
- who = "BIOS-e801";
- }
-
- e820.nr_map = 0;
- add_memory_region(0, LOWMEMSIZE(), E820_RAM);
- add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
- }
- return who;
-}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-generic/setup_arch_pre.h 01-subarch/arch/i386/mach-generic/setup_arch_pre.h
--- 00-virgin/arch/i386/mach-generic/setup_arch_pre.h Sun Nov 17 20:29:22 2002
+++ 01-subarch/arch/i386/mach-generic/setup_arch_pre.h Wed Dec 31 16:00:00 1969
@@ -1,5 +0,0 @@
-/* Hook to call BIOS initialisation function */
-
-/* no action for generic */
-
-#define ARCH_SETUP
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-generic/smpboot_hooks.h 01-subarch/arch/i386/mach-generic/smpboot_hooks.h
--- 00-virgin/arch/i386/mach-generic/smpboot_hooks.h Sun Nov 17 20:29:30 2002
+++ 01-subarch/arch/i386/mach-generic/smpboot_hooks.h Wed Dec 31 16:00:00 1969
@@ -1,33 +0,0 @@
-/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
- * which needs to alter them. */
-
-static inline void smpboot_clear_io_apic_irqs(void)
-{
- io_apic_irqs = 0;
-}
-
-static inline void smpboot_setup_warm_reset_vector(void)
-{
- /*
- * Install writable page 0 entry to set BIOS data area.
- */
- local_flush_tlb();
-
- /*
- * Paranoid: Set warm reset code and vector here back
- * to default values.
- */
- CMOS_WRITE(0, 0xf);
-
- *((volatile long *) phys_to_virt(0x467)) = 0;
-}
-
-static inline void smpboot_setup_io_apic(void)
-{
- /*
- * Here we can be sure that there is an IO-APIC in the system. Let's
- * go and set it up:
- */
- if (!skip_ioapic_setup && nr_ioapics)
- setup_IO_APIC();
-}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-generic/topology.c 01-subarch/arch/i386/mach-generic/topology.c
--- 00-virgin/arch/i386/mach-generic/topology.c Sun Dec 1 09:59:46 2002
+++ 01-subarch/arch/i386/mach-generic/topology.c Wed Dec 31 16:00:00 1969
@@ -1,68 +0,0 @@
-/*
- * arch/i386/mach-generic/topology.c - Populate driverfs with topology information
- *
- * Written by: Matthew Dobson, IBM Corporation
- * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <colpatch@us.ibm.com>
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/cpu.h>
-
-struct i386_cpu cpu_devices[NR_CPUS];
-
-#ifdef CONFIG_NUMA
-#include <linux/mmzone.h>
-#include <asm/node.h>
-#include <asm/memblk.h>
-
-struct i386_node node_devices[MAX_NUMNODES];
-struct i386_memblk memblk_devices[MAX_NR_MEMBLKS];
-
-static int __init topology_init(void)
-{
- int i;
-
- for (i = 0; i < num_online_nodes(); i++)
- arch_register_node(i);
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_possible(i)) arch_register_cpu(i);
- for (i = 0; i < num_online_memblks(); i++)
- arch_register_memblk(i);
- return 0;
-}
-
-#else /* !CONFIG_NUMA */
-
-static int __init topology_init(void)
-{
- int i;
-
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_possible(i)) arch_register_cpu(i);
- return 0;
-}
-
-#endif /* CONFIG_NUMA */
-
-subsys_initcall(topology_init);
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-summit/mach_apic.h 01-subarch/arch/i386/mach-summit/mach_apic.h
--- 00-virgin/arch/i386/mach-summit/mach_apic.h Sun Nov 17 20:29:48 2002
+++ 01-subarch/arch/i386/mach-summit/mach_apic.h Wed Dec 31 16:00:00 1969
@@ -1,57 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-extern int x86_summit;
-
-#define XAPIC_DEST_CPUS_MASK 0x0Fu
-#define XAPIC_DEST_CLUSTER_MASK 0xF0u
-
-#define xapic_phys_to_log_apicid(phys_apic) ( (1ul << ((phys_apic) & 0x3)) |\
- ((phys_apic) & XAPIC_DEST_CLUSTER_MASK) )
-
-static inline unsigned long calculate_ldr(unsigned long old)
-{
- unsigned long id;
-
- if (x86_summit)
- id = xapic_phys_to_log_apicid(hard_smp_processor_id());
- else
- id = 1UL << smp_processor_id();
- return ((old & ~APIC_LDR_MASK) | SET_APIC_LOGICAL_ID(id));
-}
-
-#define APIC_DFR_VALUE (x86_summit ? APIC_DFR_CLUSTER : APIC_DFR_FLAT)
-#define TARGET_CPUS (x86_summit ? XAPIC_DEST_CPUS_MASK : cpu_online_map)
-
-#define APIC_BROADCAST_ID (x86_summit ? 0xFF : 0x0F)
-#define check_apicid_used(bitmap, apicid) (0)
-
-static inline void summit_check(char *oem, char *productid)
-{
- if (!strncmp(oem, "IBM ENSW", 8) && !strncmp(str, "VIGIL SMP", 9))
- x86_summit = 1;
-}
-
-static inline void clustered_apic_check(void)
-{
- printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
- (x86_summit ? "Summit" : "Flat"), nr_ioapics);
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
- if (x86_summit)
- return (int) raw_phys_apicid[mps_cpu];
- else
- return mps_cpu;
-}
-
-static inline unsigned long apicid_to_phys_cpu_present(int apicid)
-{
- if (x86_summit)
- return (1ul << (((apicid >> 4) << 2) | (apicid & 0x3)));
- else
- return (1ul << apicid);
-}
-
-#endif /* __ASM_MACH_APIC_H */
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-visws/do_timer.h 01-subarch/arch/i386/mach-visws/do_timer.h
--- 00-virgin/arch/i386/mach-visws/do_timer.h Sun Nov 17 20:29:30 2002
+++ 01-subarch/arch/i386/mach-visws/do_timer.h Wed Dec 31 16:00:00 1969
@@ -1,49 +0,0 @@
-/* defines for inline arch setup functions */
-
-#include <asm/fixmap.h>
-#include <asm/cobalt.h>
-
-static inline void do_timer_interrupt_hook(struct pt_regs *regs)
-{
- /* Clear the interrupt */
- co_cpu_write(CO_CPU_STAT,co_cpu_read(CO_CPU_STAT) & ~CO_STAT_TIMEINTR);
-
- do_timer(regs);
-/*
- * In the SMP case we use the local APIC timer interrupt to do the
- * profiling, except when we simulate SMP mode on a uniprocessor
- * system, in that case we have to call the local interrupt handler.
- */
-#ifndef CONFIG_X86_LOCAL_APIC
- x86_do_profile(regs);
-#else
- if (!using_apic_timer)
- smp_local_timer_interrupt(regs);
-#endif
-}
-
-static inline int do_timer_overflow(int count)
-{
- int i;
-
- spin_lock(&i8259A_lock);
- /*
- * This is tricky when I/O APICs are used;
- * see do_timer_interrupt().
- */
- i = inb(0x20);
- spin_unlock(&i8259A_lock);
-
- /* assumption about timer being IRQ0 */
- if (i & 0x01) {
- /*
- * We cannot detect lost timer interrupts ...
- * well, that's why we call them lost, don't we? :)
- * [hmm, on the Pentium and Alpha we can ... sort of]
- */
- count -= LATCH;
- } else {
- printk("do_slow_gettimeoffset(): hardware timer problem?\n");
- }
- return count;
-}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-visws/entry_arch.h 01-subarch/arch/i386/mach-visws/entry_arch.h
--- 00-virgin/arch/i386/mach-visws/entry_arch.h Sun Nov 17 20:29:53 2002
+++ 01-subarch/arch/i386/mach-visws/entry_arch.h Wed Dec 31 16:00:00 1969
@@ -1,23 +0,0 @@
-/*
- * The following vectors are part of the Linux architecture, there
- * is no hardware IRQ pin equivalent for them, they are triggered
- * through the ICC by us (IPIs)
- */
-#ifdef CONFIG_X86_SMP
-BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
-BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
-BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
-#endif
-
-/*
- * every pentium local APIC has two 'local interrupts', with a
- * soft-definable vector attached to both interrupts, one of
- * which is a timer interrupt, the other one is error counter
- * overflow. Linux uses the local APIC timer interrupt to get
- * a much simpler SMP time architecture:
- */
-#ifdef CONFIG_X86_LOCAL_APIC
-BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
-BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
-BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
-#endif
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-visws/irq_vectors.h 01-subarch/arch/i386/mach-visws/irq_vectors.h
--- 00-virgin/arch/i386/mach-visws/irq_vectors.h Sun Nov 17 20:29:22 2002
+++ 01-subarch/arch/i386/mach-visws/irq_vectors.h Wed Dec 31 16:00:00 1969
@@ -1,64 +0,0 @@
-#ifndef _ASM_IRQ_VECTORS_H
-#define _ASM_IRQ_VECTORS_H
-
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR 0x20
-
-#define SYSCALL_VECTOR 0x80
-
-/*
- * Vectors 0x20-0x2f are used for ISA interrupts.
- */
-
-/*
- * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
- *
- * some of the following vectors are 'rare', they are merged
- * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
- * TLB, reschedule and local APIC vectors are performance-critical.
- *
- * Vectors 0xf0-0xfa are free (reserved for future Linux use).
- */
-#define SPURIOUS_APIC_VECTOR 0xff
-#define ERROR_APIC_VECTOR 0xfe
-#define INVALIDATE_TLB_VECTOR 0xfd
-#define RESCHEDULE_VECTOR 0xfc
-#define CALL_FUNCTION_VECTOR 0xfb
-
-#define THERMAL_APIC_VECTOR 0xf0
-/*
- * Local APIC timer IRQ vector is on a different priority level,
- * to work around the 'lost local interrupt if more than 2 IRQ
- * sources per level' errata.
- */
-#define LOCAL_TIMER_VECTOR 0xef
-
-/*
- * First APIC vector available to drivers: (vectors 0x30-0xee)
- * we start at 0x31 to spread out vectors evenly between priority
- * levels. (0x80 is the syscall vector)
- */
-#define FIRST_DEVICE_VECTOR 0x31
-#define FIRST_SYSTEM_VECTOR 0xef
-
-#define TIMER_IRQ 0
-
-/*
- * 16 8259A IRQ's, 208 potential APIC interrupt sources.
- * Right now the APIC is mostly only used for SMP.
- * 256 vectors is an architectural limit. (we can have
- * more than 256 devices theoretically, but they will
- * have to use shared interrupts)
- * Since vectors 0x00-0x1f are used/reserved for the CPU,
- * the usable vector space is 0x20-0xff (224 vectors)
- */
-#ifdef CONFIG_X86_IO_APIC
-#define NR_IRQS 224
-#else
-#define NR_IRQS 16
-#endif
-
-#endif /* _ASM_IRQ_VECTORS_H */
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-visws/setup_arch_post.h 01-subarch/arch/i386/mach-visws/setup_arch_post.h
--- 00-virgin/arch/i386/mach-visws/setup_arch_post.h Sun Nov 17 20:29:46 2002
+++ 01-subarch/arch/i386/mach-visws/setup_arch_post.h Wed Dec 31 16:00:00 1969
@@ -1,37 +0,0 @@
-/* Hook for machine specific memory setup.
- *
- * This is included late in kernel/setup.c so that it can make use of all of
- * the static functions. */
-
-static inline char * __init machine_specific_memory_setup(void)
-{
- char *who;
-
-
- who = "BIOS-e820";
-
- /*
- * Try to copy the BIOS-supplied E820-map.
- *
- * Otherwise fake a memory map; one section from 0k->640k,
- * the next section from 1mb->appropriate_mem_k
- */
- sanitize_e820_map(E820_MAP, &E820_MAP_NR);
- if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
- unsigned long mem_size;
-
- /* compare results from other methods and take the greater */
- if (ALT_MEM_K < EXT_MEM_K) {
- mem_size = EXT_MEM_K;
- who = "BIOS-88";
- } else {
- mem_size = ALT_MEM_K;
- who = "BIOS-e801";
- }
-
- e820.nr_map = 0;
- add_memory_region(0, LOWMEMSIZE(), E820_RAM);
- add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
- }
- return who;
-}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-visws/setup_arch_pre.h 01-subarch/arch/i386/mach-visws/setup_arch_pre.h
--- 00-virgin/arch/i386/mach-visws/setup_arch_pre.h Sun Nov 17 20:29:30 2002
+++ 01-subarch/arch/i386/mach-visws/setup_arch_pre.h Wed Dec 31 16:00:00 1969
@@ -1,5 +0,0 @@
-/* Hook to call BIOS initialisation function */
-
-/* no action for visws */
-
-#define ARCH_SETUP
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-visws/smpboot_hooks.h 01-subarch/arch/i386/mach-visws/smpboot_hooks.h
--- 00-virgin/arch/i386/mach-visws/smpboot_hooks.h Sun Nov 17 20:29:25 2002
+++ 01-subarch/arch/i386/mach-visws/smpboot_hooks.h Wed Dec 31 16:00:00 1969
@@ -1,13 +0,0 @@
-/* for visws do nothing for any of these */
-
-static inline void smpboot_clear_io_apic_irqs(void)
-{
-}
-
-static inline void smpboot_setup_warm_reset_vector(void)
-{
-}
-
-static inline void smpboot_setup_io_apic(void)
-{
-}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-voyager/do_timer.h 01-subarch/arch/i386/mach-voyager/do_timer.h
--- 00-virgin/arch/i386/mach-voyager/do_timer.h Sun Nov 17 20:29:51 2002
+++ 01-subarch/arch/i386/mach-voyager/do_timer.h Wed Dec 31 16:00:00 1969
@@ -1,22 +0,0 @@
-/* defines for inline arch setup functions */
-#include <asm/voyager.h>
-
-static inline void do_timer_interrupt_hook(struct pt_regs *regs)
-{
- do_timer(regs);
-
- voyager_timer_interrupt(regs);
-}
-
-static inline int do_timer_overflow(int count)
-{
- /* can't read the ISR, just assume 1 tick
- overflow */
- if(count > LATCH || count < 0) {
- printk(KERN_ERR "VOYAGER PROBLEM: count is %d, latch is %d\n", count, LATCH);
- count = LATCH;
- }
- count -= LATCH;
-
- return count;
-}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-voyager/entry_arch.h 01-subarch/arch/i386/mach-voyager/entry_arch.h
--- 00-virgin/arch/i386/mach-voyager/entry_arch.h Sun Nov 17 20:29:52 2002
+++ 01-subarch/arch/i386/mach-voyager/entry_arch.h Wed Dec 31 16:00:00 1969
@@ -1,26 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 2002
- *
- * Author: James.Bottomley@HansenPartnership.com
- *
- * linux/arch/i386/voyager/entry_arch.h
- *
- * This file builds the VIC and QIC CPI gates
- */
-
-/* initialise the voyager interrupt gates
- *
- * This uses the macros in irq.h to set up assembly jump gates. The
- * calls are then redirected to the same routine with smp_ prefixed */
-BUILD_INTERRUPT(vic_sys_interrupt, VIC_SYS_INT)
-BUILD_INTERRUPT(vic_cmn_interrupt, VIC_CMN_INT)
-BUILD_INTERRUPT(vic_cpi_interrupt, VIC_CPI_LEVEL0);
-
-/* do all the QIC interrupts */
-BUILD_INTERRUPT(qic_timer_interrupt, QIC_TIMER_CPI);
-BUILD_INTERRUPT(qic_invalidate_interrupt, QIC_INVALIDATE_CPI);
-BUILD_INTERRUPT(qic_reschedule_interrupt, QIC_RESCHEDULE_CPI);
-BUILD_INTERRUPT(qic_enable_irq_interrupt, QIC_ENABLE_IRQ_CPI);
-BUILD_INTERRUPT(qic_call_function_interrupt, QIC_CALL_FUNCTION_CPI);
-
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-voyager/irq_vectors.h 01-subarch/arch/i386/mach-voyager/irq_vectors.h
--- 00-virgin/arch/i386/mach-voyager/irq_vectors.h Sun Nov 17 20:29:28 2002
+++ 01-subarch/arch/i386/mach-voyager/irq_vectors.h Wed Dec 31 16:00:00 1969
@@ -1,71 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 2002
- *
- * Author: James.Bottomley@HansenPartnership.com
- *
- * linux/arch/i386/voyager/irq_vectors.h
- *
- * This file provides definitions for the VIC and QIC CPIs
- */
-
-#ifndef _ASM_IRQ_VECTORS_H
-#define _ASM_IRQ_VECTORS_H
-
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR 0x20
-
-#define SYSCALL_VECTOR 0x80
-
-/*
- * Vectors 0x20-0x2f are used for ISA interrupts.
- */
-
-/* These define the CPIs we use in linux */
-#define VIC_CPI_LEVEL0 0
-#define VIC_CPI_LEVEL1 1
-/* now the fake CPIs */
-#define VIC_TIMER_CPI 2
-#define VIC_INVALIDATE_CPI 3
-#define VIC_RESCHEDULE_CPI 4
-#define VIC_ENABLE_IRQ_CPI 5
-#define VIC_CALL_FUNCTION_CPI 6
-
-/* Now the QIC CPIs: Since we don't need the two initial levels,
- * these are 2 less than the VIC CPIs */
-#define QIC_CPI_OFFSET 1
-#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET)
-#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
-#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
-#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
-
-#define VIC_START_FAKE_CPI VIC_TIMER_CPI
-#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_CPI
-
-/* this is the SYS_INT CPI. */
-#define VIC_SYS_INT 8
-#define VIC_CMN_INT 15
-
-/* This is the boot CPI for alternate processors. It gets overwritten
- * by the above once the system has activated all available processors */
-#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0
-#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8)
-
-#define NR_IRQS 224
-
-#ifndef __ASSEMBLY__
-extern asmlinkage void vic_cpi_interrupt(void);
-extern asmlinkage void vic_sys_interrupt(void);
-extern asmlinkage void vic_cmn_interrupt(void);
-extern asmlinkage void qic_timer_interrupt(void);
-extern asmlinkage void qic_invalidate_interrupt(void);
-extern asmlinkage void qic_reschedule_interrupt(void);
-extern asmlinkage void qic_enable_irq_interrupt(void);
-extern asmlinkage void qic_call_function_interrupt(void);
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_IRQ_VECTORS_H */
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-voyager/setup_arch_post.h 01-subarch/arch/i386/mach-voyager/setup_arch_post.h
--- 00-virgin/arch/i386/mach-voyager/setup_arch_post.h Sun Nov 17 20:29:31 2002
+++ 01-subarch/arch/i386/mach-voyager/setup_arch_post.h Wed Dec 31 16:00:00 1969
@@ -1,73 +0,0 @@
-/* Hook for machine specific memory setup.
- *
- * This is included late in kernel/setup.c so that it can make use of all of
- * the static functions. */
-
-static inline char * __init machine_specific_memory_setup(void)
-{
- char *who;
-
- who = "NOT VOYAGER";
-
- if(voyager_level == 5) {
- __u32 addr, length;
- int i;
-
- who = "Voyager-SUS";
-
- e820.nr_map = 0;
- for(i=0; voyager_memory_detect(i, &addr, &length); i++) {
- add_memory_region(addr, length, E820_RAM);
- }
- return who;
- } else if(voyager_level == 4) {
- __u32 tom;
- __u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT)<<8;
- /* select the DINO config space */
- outb(VOYAGER_DINO, VOYAGER_CAT_CONFIG_PORT);
- /* Read DINO top of memory register */
- tom = ((inb(catbase + 0x4) & 0xf0) << 16)
- + ((inb(catbase + 0x5) & 0x7f) << 24);
-
- if(inb(catbase) != VOYAGER_DINO) {
- printk(KERN_ERR "Voyager: Failed to get DINO for L4, setting tom to EXT_MEM_K\n");
- tom = (EXT_MEM_K)<<10;
- }
- who = "Voyager-TOM";
- add_memory_region(0, 0x9f000, E820_RAM);
- /* map from 1M to top of memory */
- add_memory_region(1*1024*1024, tom - 1*1024*1024, E820_RAM);
- /* FIXME: Should check the ASICs to see if I need to
- * take out the 8M window. Just do it at the moment
- * */
- add_memory_region(8*1024*1024, 8*1024*1024, E820_RESERVED);
- return who;
- }
-
- who = "BIOS-e820";
-
- /*
- * Try to copy the BIOS-supplied E820-map.
- *
- * Otherwise fake a memory map; one section from 0k->640k,
- * the next section from 1mb->appropriate_mem_k
- */
- sanitize_e820_map(E820_MAP, &E820_MAP_NR);
- if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
- unsigned long mem_size;
-
- /* compare results from other methods and take the greater */
- if (ALT_MEM_K < EXT_MEM_K) {
- mem_size = EXT_MEM_K;
- who = "BIOS-88";
- } else {
- mem_size = ALT_MEM_K;
- who = "BIOS-e801";
- }
-
- e820.nr_map = 0;
- add_memory_region(0, LOWMEMSIZE(), E820_RAM);
- add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
- }
- return who;
-}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/arch/i386/mach-voyager/setup_arch_pre.h 01-subarch/arch/i386/mach-voyager/setup_arch_pre.h
--- 00-virgin/arch/i386/mach-voyager/setup_arch_pre.h Sun Nov 17 20:29:32 2002
+++ 01-subarch/arch/i386/mach-voyager/setup_arch_pre.h Wed Dec 31 16:00:00 1969
@@ -1,10 +0,0 @@
-#include <asm/voyager.h>
-#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *)(PARAM+0x40))
-
-/* Hook to call BIOS initialisation function */
-
-/* for voyager, pass the voyager BIOS/SUS info area to the detection
- * routines */
-
-#define ARCH_SETUP voyager_detect(VOYAGER_BIOS_INFO);
-
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-default/do_timer.h 01-subarch/include/asm-i386/mach-default/do_timer.h
--- 00-virgin/include/asm-i386/mach-default/do_timer.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-default/do_timer.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,82 @@
+/* defines for inline arch setup functions */
+
+#include <asm/apic.h>
+
+/**
+ * do_timer_interrupt_hook - hook into timer tick
+ * @regs: standard registers from interrupt
+ *
+ * Description:
+ * This hook is called immediately after the timer interrupt is ack'd.
+ * It's primary purpose is to allow architectures that don't possess
+ * individual per CPU clocks (like the CPU APICs supply) to broadcast the
+ * timer interrupt as a means of triggering reschedules etc.
+ **/
+
+static inline void do_timer_interrupt_hook(struct pt_regs *regs)
+{
+ do_timer(regs);
+/*
+ * In the SMP case we use the local APIC timer interrupt to do the
+ * profiling, except when we simulate SMP mode on a uniprocessor
+ * system, in that case we have to call the local interrupt handler.
+ */
+#ifndef CONFIG_X86_LOCAL_APIC
+ x86_do_profile(regs);
+#else
+ if (!using_apic_timer)
+ smp_local_timer_interrupt(regs);
+#endif
+}
+
+
+/* you can safely undefine this if you don't have the Neptune chipset */
+
+#define BUGGY_NEPTUN_TIMER
+
+/**
+ * do_timer_overflow - process a detected timer overflow condition
+ * @count: hardware timer interrupt count on overflow
+ *
+ * Description:
+ * This call is invoked when the jiffies count has not incremented but
+ * the hardware timer interrupt has. It means that a timer tick interrupt
+ * came along while the previous one was pending, thus a tick was missed
+ **/
+static inline int do_timer_overflow(int count)
+{
+ int i;
+
+ spin_lock(&i8259A_lock);
+ /*
+ * This is tricky when I/O APICs are used;
+ * see do_timer_interrupt().
+ */
+ i = inb(0x20);
+ spin_unlock(&i8259A_lock);
+
+ /* assumption about timer being IRQ0 */
+ if (i & 0x01) {
+ /*
+ * We cannot detect lost timer interrupts ...
+ * well, that's why we call them lost, don't we? :)
+ * [hmm, on the Pentium and Alpha we can ... sort of]
+ */
+ count -= LATCH;
+ } else {
+#ifdef BUGGY_NEPTUN_TIMER
+ /*
+ * for the Neptun bug we know that the 'latch'
+ * command doesnt latch the high and low value
+ * of the counter atomically. Thus we have to
+ * substract 256 from the counter
+ * ... funny, isnt it? :)
+ */
+
+ count -= 256;
+#else
+ printk("do_slow_gettimeoffset(): hardware timer problem?\n");
+#endif
+ }
+ return count;
+}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-default/entry_arch.h 01-subarch/include/asm-i386/mach-default/entry_arch.h
--- 00-virgin/include/asm-i386/mach-default/entry_arch.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-default/entry_arch.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,34 @@
+/*
+ * This file is designed to contain the BUILD_INTERRUPT specifications for
+ * all of the extra named interrupt vectors used by the architecture.
+ * Usually this is the Inter Process Interrupts (IPIs)
+ */
+
+/*
+ * The following vectors are part of the Linux architecture, there
+ * is no hardware IRQ pin equivalent for them, they are triggered
+ * through the ICC by us (IPIs)
+ */
+#ifdef CONFIG_X86_SMP
+BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
+BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
+BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
+#endif
+
+/*
+ * every pentium local APIC has two 'local interrupts', with a
+ * soft-definable vector attached to both interrupts, one of
+ * which is a timer interrupt, the other one is error counter
+ * overflow. Linux uses the local APIC timer interrupt to get
+ * a much simpler SMP time architecture:
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
+BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
+BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
+#endif
+
+#endif
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-default/irq_vectors.h 01-subarch/include/asm-i386/mach-default/irq_vectors.h
--- 00-virgin/include/asm-i386/mach-default/irq_vectors.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-default/irq_vectors.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,85 @@
+/*
+ * This file should contain #defines for all of the interrupt vector
+ * numbers used by this architecture.
+ *
+ * In addition, there are some standard defines:
+ *
+ * FIRST_EXTERNAL_VECTOR:
+ * The first free place for external interrupts
+ *
+ * SYSCALL_VECTOR:
+ * The IRQ vector a syscall makes the user to kernel transition
+ * under.
+ *
+ * TIMER_IRQ:
+ * The IRQ number the timer interrupt comes in at.
+ *
+ * NR_IRQS:
+ * The total number of interrupt vectors (including all the
+ * architecture specific interrupts) needed.
+ *
+ */
+#ifndef _ASM_IRQ_VECTORS_H
+#define _ASM_IRQ_VECTORS_H
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR 0x20
+
+#define SYSCALL_VECTOR 0x80
+
+/*
+ * Vectors 0x20-0x2f are used for ISA interrupts.
+ */
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ * some of the following vectors are 'rare', they are merged
+ * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ * TLB, reschedule and local APIC vectors are performance-critical.
+ *
+ * Vectors 0xf0-0xfa are free (reserved for future Linux use).
+ */
+#define SPURIOUS_APIC_VECTOR 0xff
+#define ERROR_APIC_VECTOR 0xfe
+#define INVALIDATE_TLB_VECTOR 0xfd
+#define RESCHEDULE_VECTOR 0xfc
+#define CALL_FUNCTION_VECTOR 0xfb
+
+#define THERMAL_APIC_VECTOR 0xf0
+/*
+ * Local APIC timer IRQ vector is on a different priority level,
+ * to work around the 'lost local interrupt if more than 2 IRQ
+ * sources per level' errata.
+ */
+#define LOCAL_TIMER_VECTOR 0xef
+
+/*
+ * First APIC vector available to drivers: (vectors 0x30-0xee)
+ * we start at 0x31 to spread out vectors evenly between priority
+ * levels. (0x80 is the syscall vector)
+ */
+#define FIRST_DEVICE_VECTOR 0x31
+#define FIRST_SYSTEM_VECTOR 0xef
+
+#define TIMER_IRQ 0
+
+/*
+ * 16 8259A IRQ's, 208 potential APIC interrupt sources.
+ * Right now the APIC is mostly only used for SMP.
+ * 256 vectors is an architectural limit. (we can have
+ * more than 256 devices theoretically, but they will
+ * have to use shared interrupts)
+ * Since vectors 0x00-0x1f are used/reserved for the CPU,
+ * the usable vector space is 0x20-0xff (224 vectors)
+ */
+#ifdef CONFIG_X86_IO_APIC
+#define NR_IRQS 224
+#else
+#define NR_IRQS 16
+#endif
+
+#endif /* _ASM_IRQ_VECTORS_H */
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-default/mach_apic.h 01-subarch/include/asm-i386/mach-default/mach_apic.h
--- 00-virgin/include/asm-i386/mach-default/mach_apic.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-default/mach_apic.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,46 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+static inline unsigned long calculate_ldr(unsigned long old)
+{
+ unsigned long id;
+
+ id = 1UL << smp_processor_id();
+ return ((old & ~APIC_LDR_MASK) | SET_APIC_LOGICAL_ID(id));
+}
+
+#define APIC_DFR_VALUE (APIC_DFR_FLAT)
+
+#ifdef CONFIG_SMP
+ #define TARGET_CPUS (clustered_apic_mode ? 0xf : cpu_online_map)
+#else
+ #define TARGET_CPUS 0x01
+#endif
+
+#define APIC_BROADCAST_ID 0x0F
+#define check_apicid_used(bitmap, apicid) (bitmap & (1 << apicid))
+
+static inline void summit_check(char *oem, char *productid)
+{
+}
+
+static inline void clustered_apic_check(void)
+{
+ printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
+ (clustered_apic_mode ? "NUMA-Q" : "Flat"), nr_ioapics);
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+ if (clustered_apic_mode)
+ return ( ((mps_cpu/4)*16) + (1<<(mps_cpu%4)) );
+ else
+ return mps_cpu;
+}
+
+static inline unsigned long apicid_to_cpu_present(int apicid)
+{
+ return (1ul << apicid);
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-default/setup_arch_post.h 01-subarch/include/asm-i386/mach-default/setup_arch_post.h
--- 00-virgin/include/asm-i386/mach-default/setup_arch_post.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-default/setup_arch_post.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,40 @@
+/**
+ * machine_specific_memory_setup - Hook for machine specific memory setup.
+ *
+ * Description:
+ * This is included late in kernel/setup.c so that it can make
+ * use of all of the static functions.
+ **/
+
+static inline char * __init machine_specific_memory_setup(void)
+{
+ char *who;
+
+
+ who = "BIOS-e820";
+
+ /*
+ * Try to copy the BIOS-supplied E820-map.
+ *
+ * Otherwise fake a memory map; one section from 0k->640k,
+ * the next section from 1mb->appropriate_mem_k
+ */
+ sanitize_e820_map(E820_MAP, &E820_MAP_NR);
+ if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
+ unsigned long mem_size;
+
+ /* compare results from other methods and take the greater */
+ if (ALT_MEM_K < EXT_MEM_K) {
+ mem_size = EXT_MEM_K;
+ who = "BIOS-88";
+ } else {
+ mem_size = ALT_MEM_K;
+ who = "BIOS-e801";
+ }
+
+ e820.nr_map = 0;
+ add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+ add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
+ }
+ return who;
+}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-default/setup_arch_pre.h 01-subarch/include/asm-i386/mach-default/setup_arch_pre.h
--- 00-virgin/include/asm-i386/mach-default/setup_arch_pre.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-default/setup_arch_pre.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,5 @@
+/* Hook to call BIOS initialisation function */
+
+/* no action for generic */
+
+#define ARCH_SETUP
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-default/smpboot_hooks.h 01-subarch/include/asm-i386/mach-default/smpboot_hooks.h
--- 00-virgin/include/asm-i386/mach-default/smpboot_hooks.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-default/smpboot_hooks.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,33 @@
+/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
+ * which needs to alter them. */
+
+static inline void smpboot_clear_io_apic_irqs(void)
+{
+ io_apic_irqs = 0;
+}
+
+static inline void smpboot_setup_warm_reset_vector(void)
+{
+ /*
+ * Install writable page 0 entry to set BIOS data area.
+ */
+ local_flush_tlb();
+
+ /*
+ * Paranoid: Set warm reset code and vector here back
+ * to default values.
+ */
+ CMOS_WRITE(0, 0xf);
+
+ *((volatile long *) phys_to_virt(0x467)) = 0;
+}
+
+static inline void smpboot_setup_io_apic(void)
+{
+ /*
+ * Here we can be sure that there is an IO-APIC in the system. Let's
+ * go and set it up:
+ */
+ if (!skip_ioapic_setup && nr_ioapics)
+ setup_IO_APIC();
+}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-summit/mach_apic.h 01-subarch/include/asm-i386/mach-summit/mach_apic.h
--- 00-virgin/include/asm-i386/mach-summit/mach_apic.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-summit/mach_apic.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,57 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+extern int x86_summit;
+
+#define XAPIC_DEST_CPUS_MASK 0x0Fu
+#define XAPIC_DEST_CLUSTER_MASK 0xF0u
+
+#define xapic_phys_to_log_apicid(phys_apic) ( (1ul << ((phys_apic) & 0x3)) |\
+ ((phys_apic) & XAPIC_DEST_CLUSTER_MASK) )
+
+static inline unsigned long calculate_ldr(unsigned long old)
+{
+ unsigned long id;
+
+ if (x86_summit)
+ id = xapic_phys_to_log_apicid(hard_smp_processor_id());
+ else
+ id = 1UL << smp_processor_id();
+ return ((old & ~APIC_LDR_MASK) | SET_APIC_LOGICAL_ID(id));
+}
+
+#define APIC_DFR_VALUE (x86_summit ? APIC_DFR_CLUSTER : APIC_DFR_FLAT)
+#define TARGET_CPUS (x86_summit ? XAPIC_DEST_CPUS_MASK : cpu_online_map)
+
+#define APIC_BROADCAST_ID (x86_summit ? 0xFF : 0x0F)
+#define check_apicid_used(bitmap, apicid) (0)
+
+static inline void summit_check(char *oem, char *productid)
+{
+ if (!strncmp(oem, "IBM ENSW", 8) && !strncmp(str, "VIGIL SMP", 9))
+ x86_summit = 1;
+}
+
+static inline void clustered_apic_check(void)
+{
+ printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
+ (x86_summit ? "Summit" : "Flat"), nr_ioapics);
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+ if (x86_summit)
+ return (int) raw_phys_apicid[mps_cpu];
+ else
+ return mps_cpu;
+}
+
+static inline unsigned long apicid_to_phys_cpu_present(int apicid)
+{
+ if (x86_summit)
+ return (1ul << (((apicid >> 4) << 2) | (apicid & 0x3)));
+ else
+ return (1ul << apicid);
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-visws/do_timer.h 01-subarch/include/asm-i386/mach-visws/do_timer.h
--- 00-virgin/include/asm-i386/mach-visws/do_timer.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-visws/do_timer.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,49 @@
+/* defines for inline arch setup functions */
+
+#include <asm/fixmap.h>
+#include <asm/cobalt.h>
+
+static inline void do_timer_interrupt_hook(struct pt_regs *regs)
+{
+ /* Clear the interrupt */
+ co_cpu_write(CO_CPU_STAT,co_cpu_read(CO_CPU_STAT) & ~CO_STAT_TIMEINTR);
+
+ do_timer(regs);
+/*
+ * In the SMP case we use the local APIC timer interrupt to do the
+ * profiling, except when we simulate SMP mode on a uniprocessor
+ * system, in that case we have to call the local interrupt handler.
+ */
+#ifndef CONFIG_X86_LOCAL_APIC
+ x86_do_profile(regs);
+#else
+ if (!using_apic_timer)
+ smp_local_timer_interrupt(regs);
+#endif
+}
+
+static inline int do_timer_overflow(int count)
+{
+ int i;
+
+ spin_lock(&i8259A_lock);
+ /*
+ * This is tricky when I/O APICs are used;
+ * see do_timer_interrupt().
+ */
+ i = inb(0x20);
+ spin_unlock(&i8259A_lock);
+
+ /* assumption about timer being IRQ0 */
+ if (i & 0x01) {
+ /*
+ * We cannot detect lost timer interrupts ...
+ * well, that's why we call them lost, don't we? :)
+ * [hmm, on the Pentium and Alpha we can ... sort of]
+ */
+ count -= LATCH;
+ } else {
+ printk("do_slow_gettimeoffset(): hardware timer problem?\n");
+ }
+ return count;
+}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-visws/entry_arch.h 01-subarch/include/asm-i386/mach-visws/entry_arch.h
--- 00-virgin/include/asm-i386/mach-visws/entry_arch.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-visws/entry_arch.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,23 @@
+/*
+ * The following vectors are part of the Linux architecture, there
+ * is no hardware IRQ pin equivalent for them, they are triggered
+ * through the ICC by us (IPIs)
+ */
+#ifdef CONFIG_X86_SMP
+BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
+BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
+BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
+#endif
+
+/*
+ * every pentium local APIC has two 'local interrupts', with a
+ * soft-definable vector attached to both interrupts, one of
+ * which is a timer interrupt, the other one is error counter
+ * overflow. Linux uses the local APIC timer interrupt to get
+ * a much simpler SMP time architecture:
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
+BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
+BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
+#endif
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-visws/irq_vectors.h 01-subarch/include/asm-i386/mach-visws/irq_vectors.h
--- 00-virgin/include/asm-i386/mach-visws/irq_vectors.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-visws/irq_vectors.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,64 @@
+#ifndef _ASM_IRQ_VECTORS_H
+#define _ASM_IRQ_VECTORS_H
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR 0x20
+
+#define SYSCALL_VECTOR 0x80
+
+/*
+ * Vectors 0x20-0x2f are used for ISA interrupts.
+ */
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ * some of the following vectors are 'rare', they are merged
+ * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ * TLB, reschedule and local APIC vectors are performance-critical.
+ *
+ * Vectors 0xf0-0xfa are free (reserved for future Linux use).
+ */
+#define SPURIOUS_APIC_VECTOR 0xff
+#define ERROR_APIC_VECTOR 0xfe
+#define INVALIDATE_TLB_VECTOR 0xfd
+#define RESCHEDULE_VECTOR 0xfc
+#define CALL_FUNCTION_VECTOR 0xfb
+
+#define THERMAL_APIC_VECTOR 0xf0
+/*
+ * Local APIC timer IRQ vector is on a different priority level,
+ * to work around the 'lost local interrupt if more than 2 IRQ
+ * sources per level' errata.
+ */
+#define LOCAL_TIMER_VECTOR 0xef
+
+/*
+ * First APIC vector available to drivers: (vectors 0x30-0xee)
+ * we start at 0x31 to spread out vectors evenly between priority
+ * levels. (0x80 is the syscall vector)
+ */
+#define FIRST_DEVICE_VECTOR 0x31
+#define FIRST_SYSTEM_VECTOR 0xef
+
+#define TIMER_IRQ 0
+
+/*
+ * 16 8259A IRQ's, 208 potential APIC interrupt sources.
+ * Right now the APIC is mostly only used for SMP.
+ * 256 vectors is an architectural limit. (we can have
+ * more than 256 devices theoretically, but they will
+ * have to use shared interrupts)
+ * Since vectors 0x00-0x1f are used/reserved for the CPU,
+ * the usable vector space is 0x20-0xff (224 vectors)
+ */
+#ifdef CONFIG_X86_IO_APIC
+#define NR_IRQS 224
+#else
+#define NR_IRQS 16
+#endif
+
+#endif /* _ASM_IRQ_VECTORS_H */
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-visws/setup_arch_post.h 01-subarch/include/asm-i386/mach-visws/setup_arch_post.h
--- 00-virgin/include/asm-i386/mach-visws/setup_arch_post.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-visws/setup_arch_post.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,37 @@
+/* Hook for machine specific memory setup.
+ *
+ * This is included late in kernel/setup.c so that it can make use of all of
+ * the static functions. */
+
+static inline char * __init machine_specific_memory_setup(void)
+{
+ char *who;
+
+
+ who = "BIOS-e820";
+
+ /*
+ * Try to copy the BIOS-supplied E820-map.
+ *
+ * Otherwise fake a memory map; one section from 0k->640k,
+ * the next section from 1mb->appropriate_mem_k
+ */
+ sanitize_e820_map(E820_MAP, &E820_MAP_NR);
+ if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
+ unsigned long mem_size;
+
+ /* compare results from other methods and take the greater */
+ if (ALT_MEM_K < EXT_MEM_K) {
+ mem_size = EXT_MEM_K;
+ who = "BIOS-88";
+ } else {
+ mem_size = ALT_MEM_K;
+ who = "BIOS-e801";
+ }
+
+ e820.nr_map = 0;
+ add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+ add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
+ }
+ return who;
+}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-visws/setup_arch_pre.h 01-subarch/include/asm-i386/mach-visws/setup_arch_pre.h
--- 00-virgin/include/asm-i386/mach-visws/setup_arch_pre.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-visws/setup_arch_pre.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,5 @@
+/* Hook to call BIOS initialisation function */
+
+/* no action for visws */
+
+#define ARCH_SETUP
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-visws/smpboot_hooks.h 01-subarch/include/asm-i386/mach-visws/smpboot_hooks.h
--- 00-virgin/include/asm-i386/mach-visws/smpboot_hooks.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-visws/smpboot_hooks.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,13 @@
+/* for visws do nothing for any of these */
+
+static inline void smpboot_clear_io_apic_irqs(void)
+{
+}
+
+static inline void smpboot_setup_warm_reset_vector(void)
+{
+}
+
+static inline void smpboot_setup_io_apic(void)
+{
+}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-voyager/do_timer.h 01-subarch/include/asm-i386/mach-voyager/do_timer.h
--- 00-virgin/include/asm-i386/mach-voyager/do_timer.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-voyager/do_timer.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,22 @@
+/* defines for inline arch setup functions */
+#include <asm/voyager.h>
+
+static inline void do_timer_interrupt_hook(struct pt_regs *regs)
+{
+ do_timer(regs);
+
+ voyager_timer_interrupt(regs);
+}
+
+static inline int do_timer_overflow(int count)
+{
+ /* can't read the ISR, just assume 1 tick
+ overflow */
+ if(count > LATCH || count < 0) {
+ printk(KERN_ERR "VOYAGER PROBLEM: count is %d, latch is %d\n", count, LATCH);
+ count = LATCH;
+ }
+ count -= LATCH;
+
+ return count;
+}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-voyager/entry_arch.h 01-subarch/include/asm-i386/mach-voyager/entry_arch.h
--- 00-virgin/include/asm-i386/mach-voyager/entry_arch.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-voyager/entry_arch.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,26 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Copyright (C) 2002
+ *
+ * Author: James.Bottomley@HansenPartnership.com
+ *
+ * linux/arch/i386/voyager/entry_arch.h
+ *
+ * This file builds the VIC and QIC CPI gates
+ */
+
+/* initialise the voyager interrupt gates
+ *
+ * This uses the macros in irq.h to set up assembly jump gates. The
+ * calls are then redirected to the same routine with smp_ prefixed */
+BUILD_INTERRUPT(vic_sys_interrupt, VIC_SYS_INT)
+BUILD_INTERRUPT(vic_cmn_interrupt, VIC_CMN_INT)
+BUILD_INTERRUPT(vic_cpi_interrupt, VIC_CPI_LEVEL0);
+
+/* do all the QIC interrupts */
+BUILD_INTERRUPT(qic_timer_interrupt, QIC_TIMER_CPI);
+BUILD_INTERRUPT(qic_invalidate_interrupt, QIC_INVALIDATE_CPI);
+BUILD_INTERRUPT(qic_reschedule_interrupt, QIC_RESCHEDULE_CPI);
+BUILD_INTERRUPT(qic_enable_irq_interrupt, QIC_ENABLE_IRQ_CPI);
+BUILD_INTERRUPT(qic_call_function_interrupt, QIC_CALL_FUNCTION_CPI);
+
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-voyager/irq_vectors.h 01-subarch/include/asm-i386/mach-voyager/irq_vectors.h
--- 00-virgin/include/asm-i386/mach-voyager/irq_vectors.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-voyager/irq_vectors.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,71 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Copyright (C) 2002
+ *
+ * Author: James.Bottomley@HansenPartnership.com
+ *
+ * linux/arch/i386/voyager/irq_vectors.h
+ *
+ * This file provides definitions for the VIC and QIC CPIs
+ */
+
+#ifndef _ASM_IRQ_VECTORS_H
+#define _ASM_IRQ_VECTORS_H
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR 0x20
+
+#define SYSCALL_VECTOR 0x80
+
+/*
+ * Vectors 0x20-0x2f are used for ISA interrupts.
+ */
+
+/* These define the CPIs we use in linux */
+#define VIC_CPI_LEVEL0 0
+#define VIC_CPI_LEVEL1 1
+/* now the fake CPIs */
+#define VIC_TIMER_CPI 2
+#define VIC_INVALIDATE_CPI 3
+#define VIC_RESCHEDULE_CPI 4
+#define VIC_ENABLE_IRQ_CPI 5
+#define VIC_CALL_FUNCTION_CPI 6
+
+/* Now the QIC CPIs: Since we don't need the two initial levels,
+ * these are 2 less than the VIC CPIs */
+#define QIC_CPI_OFFSET 1
+#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET)
+#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
+#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
+#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
+#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
+
+#define VIC_START_FAKE_CPI VIC_TIMER_CPI
+#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_CPI
+
+/* this is the SYS_INT CPI. */
+#define VIC_SYS_INT 8
+#define VIC_CMN_INT 15
+
+/* This is the boot CPI for alternate processors. It gets overwritten
+ * by the above once the system has activated all available processors */
+#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0
+#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8)
+
+#define NR_IRQS 224
+
+#ifndef __ASSEMBLY__
+extern asmlinkage void vic_cpi_interrupt(void);
+extern asmlinkage void vic_sys_interrupt(void);
+extern asmlinkage void vic_cmn_interrupt(void);
+extern asmlinkage void qic_timer_interrupt(void);
+extern asmlinkage void qic_invalidate_interrupt(void);
+extern asmlinkage void qic_reschedule_interrupt(void);
+extern asmlinkage void qic_enable_irq_interrupt(void);
+extern asmlinkage void qic_call_function_interrupt(void);
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IRQ_VECTORS_H */
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-voyager/setup_arch_post.h 01-subarch/include/asm-i386/mach-voyager/setup_arch_post.h
--- 00-virgin/include/asm-i386/mach-voyager/setup_arch_post.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-voyager/setup_arch_post.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,73 @@
+/* Hook for machine specific memory setup.
+ *
+ * This is included late in kernel/setup.c so that it can make use of all of
+ * the static functions. */
+
+static inline char * __init machine_specific_memory_setup(void)
+{
+ char *who;
+
+ who = "NOT VOYAGER";
+
+ if(voyager_level == 5) {
+ __u32 addr, length;
+ int i;
+
+ who = "Voyager-SUS";
+
+ e820.nr_map = 0;
+ for(i=0; voyager_memory_detect(i, &addr, &length); i++) {
+ add_memory_region(addr, length, E820_RAM);
+ }
+ return who;
+ } else if(voyager_level == 4) {
+ __u32 tom;
+ __u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT)<<8;
+ /* select the DINO config space */
+ outb(VOYAGER_DINO, VOYAGER_CAT_CONFIG_PORT);
+ /* Read DINO top of memory register */
+ tom = ((inb(catbase + 0x4) & 0xf0) << 16)
+ + ((inb(catbase + 0x5) & 0x7f) << 24);
+
+ if(inb(catbase) != VOYAGER_DINO) {
+ printk(KERN_ERR "Voyager: Failed to get DINO for L4, setting tom to EXT_MEM_K\n");
+ tom = (EXT_MEM_K)<<10;
+ }
+ who = "Voyager-TOM";
+ add_memory_region(0, 0x9f000, E820_RAM);
+ /* map from 1M to top of memory */
+ add_memory_region(1*1024*1024, tom - 1*1024*1024, E820_RAM);
+ /* FIXME: Should check the ASICs to see if I need to
+ * take out the 8M window. Just do it at the moment
+ * */
+ add_memory_region(8*1024*1024, 8*1024*1024, E820_RESERVED);
+ return who;
+ }
+
+ who = "BIOS-e820";
+
+ /*
+ * Try to copy the BIOS-supplied E820-map.
+ *
+ * Otherwise fake a memory map; one section from 0k->640k,
+ * the next section from 1mb->appropriate_mem_k
+ */
+ sanitize_e820_map(E820_MAP, &E820_MAP_NR);
+ if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
+ unsigned long mem_size;
+
+ /* compare results from other methods and take the greater */
+ if (ALT_MEM_K < EXT_MEM_K) {
+ mem_size = EXT_MEM_K;
+ who = "BIOS-88";
+ } else {
+ mem_size = ALT_MEM_K;
+ who = "BIOS-e801";
+ }
+
+ e820.nr_map = 0;
+ add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+ add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
+ }
+ return who;
+}
diff -urpN -X /home/fletch/.diff.exclude 00-virgin/include/asm-i386/mach-voyager/setup_arch_pre.h 01-subarch/include/asm-i386/mach-voyager/setup_arch_pre.h
--- 00-virgin/include/asm-i386/mach-voyager/setup_arch_pre.h Wed Dec 31 16:00:00 1969
+++ 01-subarch/include/asm-i386/mach-voyager/setup_arch_pre.h Sun Dec 22 12:08:42 2002
@@ -0,0 +1,10 @@
+#include <asm/voyager.h>
+#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *)(PARAM+0x40))
+
+/* Hook to call BIOS initialisation function */
+
+/* for voyager, pass the voyager BIOS/SUS info area to the detection
+ * routines */
+
+#define ARCH_SETUP voyager_detect(VOYAGER_BIOS_INFO);
+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/