[2.] Full description of the problem/report:
When trying to boot 2.5.52, right after "NET4: Unix domain sockets 1.0/SMP
for Linux NET4.0." I see:
bad: scheduling while atomic!
Call Trace: (hex numbers available if needed)
schedule+0x3e/0x2e8
add_timer+0x126/0x12c
schedule_timeout+0x84/0xac
process_timeout+0x0/0xc
proc_register+0xf/0x98
create_proc_entry+0x8d/0xa4
cache_register+0x38/0xb4
cache_register+0xaf/0xb4
init+0x2f/0x180
init+0x0/0x180
kernel_thread_helper+0x5/0xc
then many more similar errors with various different traces (involving
prepare_namespace, __call_console_drivers, prepare_binprm,
search_binary_handler etc.) culminating in an OOPS like this:
Unable to handle kernel paging request at virtual address 40000be0
printing eip:
40000be0
*pde: 00000000
oops: 0004
CPU: 0
EIP: 0023: [<40000be0>] not tainted
EFLAGS: 00010246
eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00000000 ebp: 00000000 esp: bfffff20
ds: 002b es: 002b ss: 002b
Process init (pid: 1, threadinfo: c7faa000, task: c7fa8040)
<0> Kernel panic: Attempted to kill init!
I saw similar errors with 2.5.51 & 2.5.50 (but without the trace symbols).
[3.] Keywords (i.e., modules, networking, kernel):
kernel, boot
[4.] Kernel version (from /proc/version):
I'm attempting to boot 2.5.52.
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
See above
[6.] A small shell script or example program which triggers the
problem (if possible)
N/A
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux readymix 2.4.18-pre8-mjc #1 Sun Feb 10 10:37:34 PST 2002 i586 unknown unknown GNU/Linux (this is what I'm building with, not what I'm trying to boot)
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.19
e2fsprogs 1.28
pcmcia-cs 3.1.31
PPP 2.4.1
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.15
Modules Loaded sb sb_lib uart401 xirc2ps_cs
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 8
model name : Mobile Pentium MMX
stepping : 1
cpu MHz : 265.269
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 mmx
bogomips : 529.20
[7.3.] Module information (from /proc/modules):
should be empty, building no modules
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0110-0110 : PnPBIOS PNP0c02
0114-0114 : PnPBIOS PNP0c02
01f0-01f7 : ide0
0220-022f : soundblaster
0300-030f : xirc2ps_cs
0378-037a : parport0
037b-037f : parport0
0398-0399 : PnPBIOS PNP0c02
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
04d0-04d1 : PnPBIOS PNP0c02
0800-0807 : PnPBIOS PNP0c02
0cf8-0cff : PCI conf1
2180-219f : Intel Corp. 82371AB PIIX4 ACPI
2180-218f : PnPBIOS PNP0c02
4000-40ff : PCI CardBus #01
4400-44ff : PCI CardBus #01
4800-48ff : PCI CardBus #05
4c00-4cff : PCI CardBus #05
8000-803f : Intel Corp. 82371AB PIIX4 ACPI
8000-803f : PnPBIOS PNP0c02
fcc0-fcdf : Intel Corp. 82371AB PIIX4 USB
fcc0-fcdf : usb-uhci
fcf0-fcff : Intel Corp. 82371AB PIIX4 IDE
fcf0-fcf7 : ide0
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07ffffff : System RAM
00100000-0029119a : Kernel code
0029119b-0031ab57 : Kernel data
10000000-10000fff : O2 Micro, Inc. 6832
10001000-10001fff : O2 Micro, Inc. 6832 (#2)
10400000-107fffff : PCI CardBus #01
10800000-10bfffff : PCI CardBus #01
10c00000-10ffffff : PCI CardBus #05
11000000-113fffff : PCI CardBus #05
a0100000-a0100fff : card services
fd000000-fdffffff : Neomagic Corporation NM2160 [MagicGraph 128XD]
fea00000-febfffff : Neomagic Corporation NM2160 [MagicGraph 128XD]
fed00000-fedfffff : Neomagic Corporation NM2160 [MagicGraph 128XD]
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 430TX - 82439TX MTXC (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
00:01.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at fcf0 [size=16]
00:01.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at fcc0 [size=32]
00:01.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:03.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] (rev 01) (prog-if 00 [VGA])
Subsystem: Unknown device 4320:4756
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at fea00000 (32-bit, non-prefetchable) [size=2M]
Region 2: Memory at fed00000 (32-bit, non-prefetchable) [size=1M]
00:04.0 CardBus bridge: O2 Micro, Inc. 6832 (rev 34)
Subsystem: Unknown device 4320:4756
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:04.1 CardBus bridge: O2 Micro, Inc. 6832 (rev 34)
Subsystem: Unknown device 4320:4756
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: C.19
Type: Direct-Access ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
I've tried building both with APM and with ACPI, and I am building with
ALSA for the first time. I'm not building any modules.
[X.] Other notes, patches, fixes, workarounds:
Regards,
-Simon
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/