On 19:34, lunedì 25 novembre 2002, Emiliano Gabrielli wrote:
> I have downloaded the prepatched kernel from www.aslab.com (linux-2.4.19-1)
> (they affirm their servers use 7500) and even in this case no change
> appened...
>
> I have HT enabled in the BIOS; SMP and IO-APIC are compiled in the
> kernel...
>
> but I still receive some buggy messages in dmesg (see attachement), btw my
> full custom device has IRQ routed to 0 (see my lspci)
>
> If anybody as some IDEA ... I will happy ;P
>
> best regards,
sorry, I have forgotten to attach files ...
my apologises
-- Emiliano Gabriellidip. di Fisica 2° Università di Roma "Tor Vergata"
--Boundary-00=_x7m49471TXgHtKG Content-Type: text/plain; charset="iso-8859-1"; name="lspci" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lspci"
03:0c.0 Class ff00: Altera Corporation: Unknown device 0005 (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 0 Region 0: Memory at fc200000 (32-bit, non-prefetchable) [size=1K]
--Boundary-00=_x7m49471TXgHtKG Content-Type: text/plain; charset="iso-8859-1"; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg"
U: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU1: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 Total of 2 processors activated (7969.17 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. Setting 5 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 5 ... ok. Setting 6 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 6 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15, 5-16, 5-17, 5-18, 5-19, 5-20, 5-21, 5-22, 5-23, 6-0, 6-1, 6-2, 6-3, 6-4, 6-5, 6-6, 6-7, 6-8, 6-9, 6-10, 6-11, 6-12, 6-13, 6-14, 6-15, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, 6-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 20. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. number of IO-APIC #4 registers: 24. number of IO-APIC #5 registers: 24. number of IO-APIC #6 registers: 24. testing the IO APIC.......................
IO APIC #2...... .... register #00: 02008000 ....... : physical APIC id: 02 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 79 0d 003 03 0 0 0 0 0 1 1 81 0e 003 03 0 0 0 0 0 1 1 89 0f 003 03 0 0 0 0 0 1 1 91 10 003 03 1 1 0 1 0 1 1 99 11 003 03 1 1 0 1 0 1 1 A1 12 003 03 1 1 0 1 0 1 1 A9 13 003 03 1 1 0 1 0 1 1 B1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00
IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00
IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00
IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 05000000 ....... : arbitration: 05 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00
IO APIC #6...... .... register #00: 06000000 ....... : physical APIC id: 06 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 06000000 ....... : arbitration: 06 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1996.5784 MHz. ..... host bus clock speed is 99.8288 MHz. cpu: 0, clocks: 998288, slice: 332762 CPU0<T0:998288,T1:665520,D:6,S:332762,C:998288> cpu: 1, clocks: 998288, slice: 332762 CPU1<T0:998288,T1:332752,D:12,S:332762,C:998288> checking TSC synchronization across CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 PCI: PCI BIOS revision 2.10 entry at 0xfd875, last bus=7 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Discovered primary peer bus 10 [IRQ] PCI: Discovered primary peer bus 11 [IRQ] PCI: Discovered primary peer bus 12 [IRQ] PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B7,I1,P0) -> 16 PCI->APIC IRQ transform: (B7,I2,P0) -> 17 PCI->APIC IRQ transform: (B7,I3,P0) -> 18 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd bigpage subsystem: allocated 0 bigpages (=0MB). allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 65504 aio_setup: sizeof(struct page) = 48 Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ACPI: Core Subsystem version [20011018] ACPI: Subsystem enabled ACPI: System firmware supports S0 S1 S4 S5 Processor[0]: C0 C1 Processor[1]: C0 C1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e i810_rng hardware driver 0.9.8 loaded Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3: IDE controller on PCI bus 00 dev f9 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: No IRQ known for interrupt pin A of device 00:1f.1. Probably buggy MP table. ICH3: chipset revision 2 ICH3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:pio, hdd:pio hda: IC35L040AVER07-0, ATA DISK drive hdc: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c040aa24, I/O limit 4095Mb (mask 0xffffffff) hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(100) Partition check: hda: [PTBL] [5005/255/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 mice: PS/2 mouse device common for all mice md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 2358.400 MB/sec 32regs : 1432.800 MB/sec pIII_sse : 2574.000 MB/sec pII_mmx : 2343.600 MB/sec p5_mmx : 2314.800 MB/sec raid5: using function: pIII_sse (2574.000 MB/sec) md: multipath personality registered as nr 7 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 64Kbytes TCP: Hash tables configured (established 131072 bind 43690) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 268k freed Adding Swap: 1052248k swap-space (priority -1) IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com> microcode: CPU1 no microcode found! (sig=f24, pflags=2) microcode: CPU0 no microcode found! (sig=f24, pflags=2) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:12:1E:82, IRQ 17. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). eth1: OEM i82557/i82558 10/100 Ethernet, 00:30:48:12:24:99, IRQ 18. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3).
--Boundary-00=_x7m49471TXgHtKG--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/